a-208 Kit Pneumatic Tools Single Torque Air Impact Wrench
China a-208 Kit Pneumatic Tools Single Torque Air Impact Wrench, Find details about China Pneumatic Tools, Single Air Hammer from a-208 Kit Pneumatic Tools Single Torque Air Impact Wrench
Basic Info.
Model NO.
A-2081 kit
Degree of Automation
Handle
Screwdriver Startup Mode
Hand press
Condition
New
Customized
Non-Customized
Model
a-2081
Trademark
N/M
Transport Package
Kraft Paper Box
Specification
PC
Origin
Taizhou, China
HS Code
8467110000
Model NO.
A-2081 kit
Degree of Automation
Handle
Screwdriver Startup Mode
Hand press
Condition
New
Customized
Non-Customized
Model
a-2081
Trademark
N/M
Transport Package
Kraft Paper Box
Specification
PC
Origin
Taizhou, China
HS Code
8467110000
Product Desciption
1/2 Single hammer pneumatic tools 330Nmin air impact wrench
Square drive wrench data:
Capacity Bolt Size ...... 5/8"(16mm)
Free speed ...... 7,000rpm
Max torque ...... 260ft/lb(350N.m)
Avgair consumption ...... 4cfm(1141/min)
Operating pressure ...... 90psi(6.3bar)
Air inlet size ...... 1/4"
Air hose ...... 3/8"ID
Weight ...... 5.4Lbs(2.5kgs)
A weighted sound pressure level ..... 84.4dB(A),k=3dB(A)
Sound power level ...... 95.4dB(A),k=3dB(A)
Max LPo ..... 106.9dB
Vibration in the handle ..... 33m/sk=082m/s
Package: 1pc / Kraft paper box
QTY: 10pc/ctn;
CTN size: 44.5*42.5*25cm
KIT is available in plastic box package;
OEM: Laser logo if quantity more than 100pc;
Use, maintenance and safety rules of pneumatic wrench
Use and maintenance
1. The rubber hose on the air supply pipeline shall be intact and the joint shall be firm and sealed.
2. The air trigger shall not be idled for a long time under high pressure to prevent performance degradation due to wear of parts.
3. The engine is lubricated with 30# Machine oil and the bearing and impact mechanism are lubricated with No.3 lithium grease. Before each shift, a small amount of lubricating oil should be injected into the joint.
4. The air trigger should be maintained frequently, and the maintenance period depends on the usage.
Use safety rules
1. Do not point the air pipe to yourself or others. Do not blow dust on your body with compressed air.
2. Check the air pipe frequently. If it is loose or damaged, repair or replace it in time. The accessories (such as wrench sleeve, drill bit and screwdriver) must be installed firmly.
3. When the tool is not in use, replace the parts or carry out maintenance, be sure to turn off the air source and pull out the tool and air source connector.
4. When operating or replacing tools and accessories, please wear goggles or face protection device at any time, so as to avoid foreign body or accidental injury.
5. When operating tools, do not wear hand ornaments, necklaces, scarves, ties and other things that cause injury, do not wear loose clothes, and keep a certain distance between the body and tools.
6. Non professionals are not allowed to modify the tool structure or replace the parts of other manufacturers.
7. Please do not touch the rotating shaft directly to avoid injury of hands or other body tools. Wear gloves during operation.
8. It is not allowed to leave the gas pipeline in the corridor or work area too long to prevent the staff from tripping and slipping.
Model ....... A-208
Capacity Bolt Size ...... 5/8"(16mm)
Free speed ...... 7,000rpm
Max torque ...... 260ft/lb(350N.m)
Avgair consumption ...... 4cfm(1141/min)
Operating pressure ...... 90psi(6.3bar)
Air inlet size ...... 1/4"
Air hose ...... 3/8"ID
Weight ...... 5.4Lbs(2.5kgs)
A weighted sound pressure level ..... 84.4dB(A),k=3dB(A)
Sound power level ...... 95.4dB(A),k=3dB(A)
Max LPo ..... 106.9dB
Vibration in the handle ..... 33m/sk=082m/s
Capacity Bolt Size ...... 5/8"(16mm)
Free speed ...... 7,000rpm
Max torque ...... 260ft/lb(350N.m)
Avgair consumption ...... 4cfm(1141/min)
Operating pressure ...... 90psi(6.3bar)
Air inlet size ...... 1/4"
Air hose ...... 3/8"ID
Weight ...... 5.4Lbs(2.5kgs)
A weighted sound pressure level ..... 84.4dB(A),k=3dB(A)
Sound power level ...... 95.4dB(A),k=3dB(A)
Max LPo ..... 106.9dB
Vibration in the handle ..... 33m/sk=082m/s
Square drive wrench data:
Capacity Bolt Size ...... 5/8"(16mm)
Free speed ...... 7,000rpm
Max torque ...... 260ft/lb(350N.m)
Avgair consumption ...... 4cfm(1141/min)
Operating pressure ...... 90psi(6.3bar)
Air inlet size ...... 1/4"
Air hose ...... 3/8"ID
Weight ...... 5.4Lbs(2.5kgs)
A weighted sound pressure level ..... 84.4dB(A),k=3dB(A)
Sound power level ...... 95.4dB(A),k=3dB(A)
Max LPo ..... 106.9dB
Vibration in the handle ..... 33m/sk=082m/s
| Model | A-208 |
| Series | Single hammer |
| Square drive | 1/2inch |
| Max torque | 330Nmin |
| Free speed | 7000rpm |
| Capacity bolt | 16mm |
| Air consumption | 242L/min |
| Air inlet | 1/4inch |
| Air hose | 3/8inch |
| Single pc |  |
| Model | A-2081 |
| Series | Single hammer |
| Square drive | 1/2inch |
| Max torque | 330Nmin |
| Free speed | 7000rpm |
| Capacity bolt | 16mm |
| Air consumption | 242L/min |
| Air inlet | 1/4inch |
| Air hose | 3/8inch |
| KIT1 |  |
| Model | A-2082 |
| Series | Single hammer |
| Square drive | 1/2inch |
| Max torque | 330Nmin |
| Free speed | 7000rpm |
| Capacity bolt | 16mm |
| Air consumption | 242L/min |
| Air inlet | 1/4inch |
| Air hose | 3/8inch |
| KIT2 |  |
Package: 1pc / Kraft paper box
QTY: 10pc/ctn;
CTN size: 44.5*42.5*25cm
KIT is available in plastic box package;
OEM: Laser logo if quantity more than 100pc;
Use, maintenance and safety rules of pneumatic wrench
Use and maintenance
1. The rubber hose on the air supply pipeline shall be intact and the joint shall be firm and sealed.
2. The air trigger shall not be idled for a long time under high pressure to prevent performance degradation due to wear of parts.
3. The engine is lubricated with 30# Machine oil and the bearing and impact mechanism are lubricated with No.3 lithium grease. Before each shift, a small amount of lubricating oil should be injected into the joint.
4. The air trigger should be maintained frequently, and the maintenance period depends on the usage.
Use safety rules
1. Do not point the air pipe to yourself or others. Do not blow dust on your body with compressed air.
2. Check the air pipe frequently. If it is loose or damaged, repair or replace it in time. The accessories (such as wrench sleeve, drill bit and screwdriver) must be installed firmly.
3. When the tool is not in use, replace the parts or carry out maintenance, be sure to turn off the air source and pull out the tool and air source connector.
4. When operating or replacing tools and accessories, please wear goggles or face protection device at any time, so as to avoid foreign body or accidental injury.
5. When operating tools, do not wear hand ornaments, necklaces, scarves, ties and other things that cause injury, do not wear loose clothes, and keep a certain distance between the body and tools.
6. Non professionals are not allowed to modify the tool structure or replace the parts of other manufacturers.
7. Please do not touch the rotating shaft directly to avoid injury of hands or other body tools. Wear gloves during operation.
8. It is not allowed to leave the gas pipeline in the corridor or work area too long to prevent the staff from tripping and slipping.
You Might Also Like
Custom Pink Ballet Shoes Figurine Money-Box Bank
12/24V Silicone Flexible LED Neon Rope Lights
Construction Structural Mild Steel Angle Bar Made in China
Sinoacme Prefabricated High Rise Metal Frame Chemical Plant
300W Advertise Laser Welder Machine
Cheapest Medical Non Woven Sterile Adhesive Eye Patch Wound ......
TDS17 Single Prism System
Duct Tape Cloth Tape Gaffer Tape for Carpet Sealing 70mesh
Factory Price Original Ox Bile Raw Material Cholic Acid Extr......
Steel Production Continuous Casting Machine for Rebar Making......
Qt4-15 Concrete Hollow Block Paver Maker ( 50 plants in Indi......
Midea Cooling Heating Inverter Central Air Conditioner 10- 1......