Geommebrane Geomembrane Pond Liner HDPE Geomembrane
A Brief Introduction
Our high density polyethylene (HDPE) geomembranes provide an impermeable barrier against a wide range of solids and liquids.They exhibit excellent chemical and UV resistance,impermeability,and high yield and welded seam strengths.
Product Name | HDPE LLDPE Geomembrane for Fish Pond |
Thickness | 0.1mm-3.0mm |
Length | 50m/roll, 100m/roll, 150m/roll or customized |
Width | 1m-8m or follow customers' demand |
Surface | Both sides smooth/Both sides textured/One side smooth the other side textured |
Color | Black, White, Green, Blue (mainly black) |
Standard | ASTM GRI-GM13 |
Certificates | CE/ISO 9001/ISO 14001/ISO45001 |
The raw materials of HDPE/LLDPE Geomembrane are 100% virgin materials specially for Geomembrane from world-famous brands, including: Singapore Phillips,Nordic Chemical, Dow,Total, Qatar Philips, Korea Oil Chemical, etc. Our company's commitment to our customers is never to use even one grain of recycled materials! Consequently, the geomembrane produced by our company has excellent tensile yield strength and resistance to environmental stress cracking.
Technical Data SheetS/N | Item | Index |
Thickness mm | 0.75 | 1.00 | 1.25 | 1.50 | 2.00 | 2.50 | 3.00 |
1 | Density (g/m³) | ≥0.940 |
2 | Tensile yield strength (vertical and horizontal) (N/mm) | ≥11 | ≥15 | ≥18 | ≥22 | ≥29 | ≥37 | ≥44 |
3 | Tensile breaking strength (vertical and horizontal) (N/mm) | ≥20 | ≥27 | ≥33 | ≥40 | ≥53 | ≥67 | ≥80 |
4 | Elongation (vertical and horizontal) (%) | - | - | - | ≥12 |
5 | Elongation at break (vertical and horizontal) (%) | ≥700 |
6 | Tearing load at right angle (vertical and horizontal) N | ≥93 | ≥125 | ≥160 | ≥190 | ≥250 | ≥315 | ≥375 |
7 | Anti-puncture strength (N) | ≥240 | ≥320 | ≥400 | ≥480 | ≥540 | ≥800 | ≥960 |
8 ' | Tensile load stress cracking (tensile method of dead load of the cut) (h) | _ | ≥300 |
9 | Carbon black content (%) | 2.0~3.0 |
10 | Carbon black dispersion | The number of Level 3 among 10 data is not more than one; Level 4 and Level 5 are not allowed. |
| Oxidation induction time (OIT) min | Oxidation induction time under normal pressure ≥100 |
11* | Oxidation induction time under disjoining pressure ≥400 |
12 | 85°C thermal aging (retention rate of OIT under normal pressure after 90d) (%) | ≥55 |
13a | Ultraviolet resistance (retention rate of OIT after 1600h ultraviolet irradiation) (%) | ≥50 |
Note: Technical performance index of thickness specification not listed in the table shall be implemented according to interpolation method. |
Product FeaturesLow Permeability - HDPE lining systems are secure because leachate does not penetrate them; methane gas will not escape from the HDPE cover system; and rainwater will not infiltrate an HDPE cap. Chemical Resistance - HDPE, resistant to a wide range of chemicals, is not threatened by typical solid or hazardous waste leachates. It is also suitable for sludge and secondary
containment around chemical storage facilities.
Manufacturing Proces Geomembranes from the Earth Shield are produced with professional machines,along with strict quality control from our professional technical staff.Inspections are implemented every a couple of hours;and also,products delivered are always abided by a strict delivery report.Therefore, the quality control details are clear and definite to all of our venerable customers.
ApplicationsApplications for our products include: • Landfill (primary & secondary containment)
• Landfill caps/closures
• Lagoon Liners
• Mining Heap Leach Pads
• Pond Liners
• Agriculture Pond Liners
• Raw water treatment reservoirs
• Potable water reservoirs
• Retention ponds
• Floating Covers
• Secondary containment for above ground
storage tanks
• Solutions ponds for mining applications
• Tank linings
• Waste water treatment lagoonto, to name a few.
Other Applications
Besides the applications mentioned above, our geomembrane are also widely used in canals, reservoirs, rivers, and artificial lakes, to name a few.
InstallationWelding machines & welding rods are also avaliable from us; For big projects, professional technical teams can be sent to your worksite for necessary assistance.
FAQQ: Are you trading company or manufacturer ?
A: We are factory.
Q: Is the quality of your products stable?
A: The company has a complete QC system, and each batch of products will be sampled and the samples will be kept for 5 years.
Q: Can you do OEM?
A: Yes, of course. We can produce the products exactly as your request.
Q: Do you provide samples ? Is it free or extra ?
A: Yes, we offer the sample for free but do not pay the cost of freight.
Q: How long does your delivery take?
A: Generally it takes 5-10 days if the goods are in stock;Otherwise it will take 10-15 days (of course, it d
depends on quantity at the same time).
Q: What is your terms of payment ?
A: Payment<=5000USD, 100% in advance. Payment>=5000USD, 30% T/T in advance, balance before
shipment.
If you have any other questions, please feel free to contact us at any time.