Transmission Martin Gearbox Parts Conveyor Roller Chains 16b -9teeth Hub Sprockets

China Transmission Martin Gearbox Parts Conveyor Roller Chains 16b-9teeth Hub Sprockets, Find details about China Roller Chain, Sprocket from Transmission Martin Gearbox Parts Conveyor Roller Chains 16b-9teeth Hub Sprockets

Model NO.
80B-9T
Type
Circular Gear
Mixer Type
Agitator
Working
High Speed Mixer
Stirring Type
Spiral
Application Area
Metallurgy&Mineral
Layout Type
Horizontal
Mixing Drum Shape
Disc
Additional Capabilities
Milling, Drying, Granulating, Coating
Operating Type
Cycle Operating
Condition
New
Warranty
1 Year
After-Sales Service
7*24hours
Trademark
SMCC OR NO MARK
Transport Package
According to Customer Requirements
Specification
Alloy steel
Origin
China
HS Code
8483900090
Model NO.
80B-9T
Type
Circular Gear
Mixer Type
Agitator
Working
High Speed Mixer
Stirring Type
Spiral
Application Area
Metallurgy&Mineral
Layout Type
Horizontal
Mixing Drum Shape
Disc
Additional Capabilities
Milling, Drying, Granulating, Coating
Operating Type
Cycle Operating
Condition
New
Warranty
1 Year
After-Sales Service
7*24hours
Trademark
SMCC OR NO MARK
Transport Package
According to Customer Requirements
Specification
Alloy steel
Origin
China
HS Code
8483900090


SPROCKET  1'' X 17.02mm  16B SERIES SPROCKETS
 
For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r326.0mm
Radius Width C2.5mm
Tooth Width b115.8mm
Tooth Width B116.2mm
Tooth Width B247.7mm
Tooth Width B379.6mm
16B SERIES ROLLER CHAINS 
Pitch25.4 mm
Internal Width17.02 mm
Roller Diameter15.88mm
Transmission Martin Gearbox Parts Conveyor Roller Chains 16b-9teeth Hub Sprockets
Transmission Martin Gearbox Parts Conveyor Roller Chains 16b-9teeth Hub Sprockets



 
ZdedpSIMPLEXDUPLEXTRIPLEX
dmD1AdmD2AdmD2A
877.0 66.37 421635421665422095
985.0 74.27 501635501665502095
1093.0 82.19 551635561665562095
11105.1 90.14 6116406420706425100
12109.0 98.14 6916407220707225100
13117.0 106.12 7816408020708025100
14125.0 114.15 8416408820708825100
15133.0 122.17 9216409620709625100
16141.0 130.20 1002045104207010425100
17149.0 138.22 1002045112207011225100
18157.0 146.28 1002045120207012025100
19165.2 154.33 1002045128207012825100
20173.2 162.38 1002045130207013025100
21181.2 170.43 11020501302570*13025100
22189.3 178.48 1102050*1302570*13025100
23197.5 186.53 1102050*1302570*13025100
24205.5 194.59 1102050*1302570*13025100
25213.5 202.66 1102050*1302570*13025100
26221.6 210.72 1202050*1302570*13030100
27229.6 218.79 1202050*1302570*13030100
28237.7 226.85 1202050*1302570*13030100
29245.8 234.92 1202050*1302570*13030100
30254.0 243.00 1202050*1302570*13030100
31262.0 251.08 *1202550*1402570*14030100
32270.0 259.13 *1202550*1402570*14030100
33278.5 267.21 *1202550*1402570*14030100
34287.0 275.28 *1202550*1402570*14030100
35296.2 283.36 *1202550*1402570*14030100
36304.6 291.44 *1202550*1402570*14030100
37312.6 299.51 *1202550*1402570*14030100
38320.7 307.59 *1202550*1402570*14030100
39328.8 315.67 *1202550*1402570*14030100
40336.9 323.75 *1202550*1402570*14030100
41345.0 331.81 *1252568*1402570*16030100
42353.0 339.89 *1252568*1402570*16030100
43361.1 347.97 *1252568*1402570*16030100
44369.1 356.05 *1252568*1402570*16030100
45377.1 364.12 *1252568*1402570*16030100
46385.2 372.20 *1252568*1402570*16030100
47393.2 380.28 *1252568*1402570*16030100
48401.3 388.36 *1252568*1402570*16030100
49409.3 396.44 *1252568*1402570*16030100
50417.4 404.52 *1252568*1402570*16030100
51425.5 412.60 *1252568*1502585*18030110
52433.6 420.68 *1252568*1502585*18030110
53441.7 428.76 *1252568*1502585*18030110
54448.3 436.84 *1252568*1502585*18030110
55457.9 444.92 *1252568*1502585*18030110
56466.0 453.01 *1252568*1502585*18030110
57474.0 461.08 *1252568*1502585*18030110
58482.1 469.16 *1332568*1502585*18030110
59490.2 477.24 *1332568*1502585*18030110
60498.3 485.23 *1332568*1502585*18030110
62514.5 501.49 *1332568*1502585*18030110
64530.7 517.65 *1402568*1602590*18030110
65538.8 525.73 *1402568*1602590*18030110
66546.8 533.80 *1402568*1602590*18030110
68562.9 549.98 *1402568*1602590*18030110
70579.2 566.15 *1402568*1602590*18030110
72595.4 582.31 *1402568*1602590*18030110
75619.7 606.56 *1402568*1602590*18030110
76627.0 614.64 *1402568*1602590*18030110
78643.3 630.81 *1402568*1602590*18030110
80660.0 646.97 *1402568*1602590*18030110
85699.9 687.39 *1402578*1602590*18030110
90740.3 727.80 *1402578*1602590*18030110
95781.1 768.22 *1402578*1602590*18030110
100821.1 808.64 *1402578*1602590*18030110
110902.0 889.48 *1402578*1602590*18030110
114934.3 921.81 *1402578*1602590*18030110
120982.8 970.32 *1402578*1602590*18030110
1251023.3 1010.73 *1402578*1602590*18030110
Notice: *welding hub

BASIC INFO.
 
Product name DIN ISO Standard Sprocket for Roller Chain
Materials Available 1. Stainless Steel: SS304, SS316, etc
2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
3. OEM according to your request
Surface TreatmentHeat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
CharacteristicFire ResistantOil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterionISO DIN ANSI & Customer Drawings
SizeCustomer Drawings & ISO standard 
ApplicationIndustrial transmission equipment
PackageWooden Case / Container and pallet, or made-to-order
CertificateISO9001: 2008 
AdvantageQuality first, Service first, Competitive price, Fast delivery
Delivery Time20 days for samples. 45 days for official order.


INSTALLATION AND USING

The chain wheel, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chain spoket it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
 

FOR CHAIN STANDARDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25
ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
SizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load
250.250 in (6.35 mm)0.130 in (3.30 mm)780 lb (350 kg)18 lb (8.2 kg)
350.375 in (9.53 mm)0.200 in (5.08 mm)1,760 lb (800 kg)18 lb (8.2 kg)
410.500 in (12.70 mm)0.306 in (7.77 mm)1,500 lb (680 kg)18 lb (8.2 kg)
400.500 in (12.70 mm)0.312 in (7.92 mm)3,125 lb (1,417 kg)31 lb (14 kg)
500.625 in (15.88 mm)0.400 in (10.16 mm)4,880 lb (2,210 kg)49 lb (22 kg)
600.750 in (19.05 mm)0.469 in (11.91 mm)7,030 lb (3,190 kg)70 lb (32 kg)
801.000 in (25.40 mm)0.625 in (15.88 mm)12,500 lb (5,700 kg)125 lb (57 kg)
1001.250 in (31.75 mm)0.750 in (19.05 mm)19,531 lb (8,859 kg)195 lb (88 kg)
1201.500 in (38.10 mm)0.875 in (22.23 mm)28,125 lb (12,757 kg)281 lb (127 kg)
1401.750 in (44.45 mm)1.000 in (25.40 mm)38,280 lb (17,360 kg)383 lb (174 kg)
1602.000 in (50.80 mm)1.125 in (28.58 mm)50,000 lb (23,000 kg)500 lb (230 kg)
1802.250 in (57.15 mm)1.460 in (37.08 mm)63,280 lb (28,700 kg)633 lb (287 kg)
2002.500 in (63.50 mm)1.562 in (39.67 mm)78,175 lb (35,460 kg)781 lb (354 kg)
2403.000 in (76.20 mm)1.875 in (47.63 mm)112,500 lb (51,000 kg)1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches)Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14282518
383835316
12484114
124840516
58585038
34686012
1888058

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An "H" following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.

 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, "10 speed chain". Hub gear or single speed bicycles use 1/2" x 1/8" chains, where 1/8" refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at one and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.


 

WHY CHOOSE US 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed Worldwide Marketing Network
7. Efficient After-Sale Service System

 
The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve worldwide range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.


ISO/ANSI Standard High Strength and Wear Resistance Double Pitch Conveyor ChainsISO/ANSI Standard High Strength and Wear Resistance Double Pitch Conveyor Chains
Transmission Martin Gearbox Parts Conveyor Roller Chains 16b-9teeth Hub Sprockets
Transmission Martin Gearbox Parts Conveyor Roller Chains 16b-9teeth Hub Sprockets
Transmission Martin Gearbox Parts Conveyor Roller Chains 16b-9teeth Hub Sprockets