Cisco Compatiable Gigabit Sm Bidi 1490 /1550nm 60-80km SFP Module
China Cisco Compatiable Gigabit Sm Bidi 1490/1550nm 60-80km SFP Module, Find details about China 1490/1550nm SFP, SFP Module from Cisco Compatiable Gigabit Sm Bidi 1490/1550nm 60-80km SFP Module
Basic Info.
Model NO.
1.25g SFP Module
Transmission Distance
60km
Fiber Port
Single Fiber LC
Industrial Temperatureperature
-40 to +85°c
Commercial Temperature
0 to +70°c
Compatiable
HP/Cisco/Hw etc
Trademark
Takfly
Transport Package
Blister Box+Standard Carton
Specification
SFP
Origin
Shenzhen, China
HS Code
8517706000
Model NO.
1.25g SFP Module
Transmission Distance
60km
Fiber Port
Single Fiber LC
Industrial Temperatureperature
-40 to +85°c
Commercial Temperature
0 to +70°c
Compatiable
HP/Cisco/Hw etc
Trademark
Takfly
Transport Package
Blister Box+Standard Carton
Specification
SFP
Origin
Shenzhen, China
HS Code
8517706000
Product Desciption
Cisco Compatiable Gigabit SM Single Fiber BIDI 1490/1550 60-80KM SFP Module DDM
Features
1)Dual data-rate of 1.25Gbps/1.063Gbps operation
2)1490nm&1550nm DFB laser and PIN photodetector for 80km transmission
3)Compliant with SFP MSA and SFF-8472 with simplex LC receptacle
4)Digital Diagnostic Monitoring:Internal Calibration or External Calibration
5)Compatible with RoHS
6)+3.3V single power supply
7)Operating case temperature:Standard : 0 to +70°C
Detail pics
Applications
1)Gigabit Ethernet
2)Fiber Channel
3)Switch to Switch interface
4)Switched backplane applications
5)Router/Server interface
6)Other optical transmission systems
Description
The SFP-BIDI transceivers are high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps and 80km transmission distance with SMF.
The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.
Spec
Table 1 - Absolute Maximum Ratings
Recommended Operating Conditions
Table 2 - Recommended Operating Conditions
Electrical Characteristics
(DFB and PIN, 80km Reach)
Table 3 - Optical and Electrical Characteristics
Notes:
1. The optical power is launched into SMF.
2. PECL input, internally AC-coupled and terminated.
3. Measured with a PRBS 27-1 test pattern @1250Mbps, BER ≤1×10-12.
4. Internally AC-coupled.
Timing and Electrical
Table 4 - Timing and Electrical
Diagnostics
Table 5 - Diagnostics Specification
Pic of Takfly
Why choose Takfly ?
Service
1.Customer's logo: Acceptable
2.General inspection on fixing before packing
3.Third party inspection: Acceptable
Quality Control
All products must go through five checks before manufacturing process
1.Material incoming inspection before production
2.Full check after every individual process finished
3.Full check after production half-done
4.Full check before packing
5.Spots check after production packed before shipping
Advantages:
1.15 years experience in manufacturing fiber optic products..
2.Availability of R & D with more than 10 engineers.
3.Available of design and making mold with special molding house.
4.High quality, attractive price and fast delivery(2-7days)
5.OEM, ODM customer designs are also welcomed
6.More than 200 workers
7.Excellent service
Delivery:
1.Packing: Plastic bag& carton, Neutral packing or as your required.
2.Sample time: 1-3 days after confirm
3.Order lead time: 2-7working days depend on quantity and products.
4.Shipping port: Shenzhen China or HK
5.Shipping term: EXW or FOB
Payment:
Acceptable by T/T, West Union, PayPal and L/C according to your requirement
Shipping
1.Once confirmed the order, and payment sent after finishing goods. 2.Goods will be sent within 7 days with the fast,reasonable and efficient shipping mode such as DHL, EMS, UPS,FEDEX, TNT, etc.
3.Please make sure your postal address is correct. Any lost and mistakes because of wrong address are not supplier's responsibility.
4.Please do not bid if you disagree with the shipping and handling charge.
Contact
1.Our working time:8:30am~5:30pm
2.All the inquiries will be replied within 24hours, So please feel free to send us your inquiry.
3.When our trade manager is off line, please feel free to leave a message, and tell us the products you need, our model number, and your E-mail address, we will reply to you within 24 hours too.
Any question about this sfp module transceiver,please leave me an inquiry or contact me directly.
Features
1)Dual data-rate of 1.25Gbps/1.063Gbps operation
2)1490nm&1550nm DFB laser and PIN photodetector for 80km transmission
3)Compliant with SFP MSA and SFF-8472 with simplex LC receptacle
4)Digital Diagnostic Monitoring:Internal Calibration or External Calibration
5)Compatible with RoHS
6)+3.3V single power supply
7)Operating case temperature:Standard : 0 to +70°C
Detail pics
Applications
1)Gigabit Ethernet
2)Fiber Channel
3)Switch to Switch interface
4)Switched backplane applications
5)Router/Server interface
6)Other optical transmission systems
Description
The SFP-BIDI transceivers are high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps and 80km transmission distance with SMF.
The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.
Spec
Table 1 - Absolute Maximum Ratings
| Parameter | Symbol | Min | Max | Unit |
| Supply Voltage | Vcc | -0.5 | 4.5 | V |
| Storage Temperature | Ts | -40 | +85 | °C |
| Operating Humidity | - | 5 | 85 | % |
Recommended Operating Conditions
Table 2 - Recommended Operating Conditions
| Parameter | Symbol | Min | Typical | Max | Unit | ||
| Operating Case Temperature | Standard | Tc | 0 | +70 | °C | ||
| Power Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | ||
| Power Supply Current | Icc | 300 | mA | ||||
| Data Rate | Gigabit Ethernet | 1.25 | Gbps | ||||
| Fiber Channel | 1.063 | ||||||
Electrical Characteristics
(DFB and PIN, 80km Reach)
Table 3 - Optical and Electrical Characteristics
| Parameter | Symbol | Min | Typical | Max | Unit | Notes | ||
| Transmitter | ||||||||
| Centre Wavelength | λc | 1530 | 1550 | 1570 | nm | |||
| Spectral Width (-20dB) | λ | 1 | nm | |||||
| Side Mode Suppression Ratio | SMSR | 30 | dB | |||||
| Average Output Power | Pout | -2 | +3 | dBm | 1 | |||
| Extinction Ratio | ER | 9 | dB | |||||
| Optical Rise/Fall Time (20%~80%) | tr/tf | 0.26 | ns | |||||
| Data Input Swing Differential | VIN | 400 | 1800 | mV | 2 | |||
| Input Differential Impedance | ZIN | 90 | 100 | 110 | Ω | |||
| TX Disable | Disable | 2.0 | Vcc | V | ||||
| Enable | 0 | 0.8 | V | |||||
| TX Fault | Fault | 2.0 | Vcc | V | ||||
| Normal | 0 | 0.8 | V | |||||
| Receiver | ||||||||
| Centre Wavelength | λc | 1470 | 1510 | nm | ||||
| Receiver Sensitivity | -25 | dBm | 3 | |||||
| Receiver Overload | -3 | dBm | 3 | |||||
| LOS De-Assert | LOSD | -31 | dBm | |||||
| LOS Assert | LOSA | -35 | dBm | |||||
| LOS Hysteresis | 1 | 4 | dB | |||||
| Data Output Swing Differential | Vout | 400 | 1800 | mV | 4 | |||
| LOS | High | 2.0 | Vcc | V | ||||
| Low | 0.8 | V | ||||||
Notes:
1. The optical power is launched into SMF.
2. PECL input, internally AC-coupled and terminated.
3. Measured with a PRBS 27-1 test pattern @1250Mbps, BER ≤1×10-12.
4. Internally AC-coupled.
Timing and Electrical
Table 4 - Timing and Electrical
| Parameter | Symbol | Min | Typical | Max | Unit |
| Tx Disable Negate Time | t_on | 1 | ms | ||
| Tx Disable Assert Time | t_off | 10 | µs | ||
| Time To Initialize, including Reset of Tx Fault | t_init | 300 | ms | ||
| Tx Fault Assert Time | t_fault | 100 | µs | ||
| Tx Disable To Reset | t_reset | 10 | µs | ||
| LOS Assert Time | t_loss_on | 100 | µs | ||
| LOS De-assert Time | t_loss_off | 100 | µs | ||
| Serial ID Clock Rate | f_serial_clock | 400 | KHz | ||
| MOD_DEF (0:2)-High | VH | 2 | Vcc | V | |
| MOD_DEF (0:2)-Low | VL | 0.8 | V |
Diagnostics
Table 5 - Diagnostics Specification
| Parameter | Range | Unit | Accuracy | Calibration |
| Temperature | 0 to +70 | °C | ±3°C | Internal / External |
| Voltage | 3.0 to 3.6 | V | ±3% | Internal / External |
| Bias Current | 0 to 100 | mA | ±10% | Internal / External |
| TX Power | -2 to +3 | dBm | ±3dB | Internal / External |
| RX Power | -25 to -3 | dBm | ±3dB | Internal / External |
Pic of Takfly
Why choose Takfly ?
Service
1.Customer's logo: Acceptable
2.General inspection on fixing before packing
3.Third party inspection: Acceptable
Quality Control
All products must go through five checks before manufacturing process
1.Material incoming inspection before production
2.Full check after every individual process finished
3.Full check after production half-done
4.Full check before packing
5.Spots check after production packed before shipping
Advantages:
1.15 years experience in manufacturing fiber optic products..
2.Availability of R & D with more than 10 engineers.
3.Available of design and making mold with special molding house.
4.High quality, attractive price and fast delivery(2-7days)
5.OEM, ODM customer designs are also welcomed
6.More than 200 workers
7.Excellent service
Delivery:
1.Packing: Plastic bag& carton, Neutral packing or as your required.
2.Sample time: 1-3 days after confirm
3.Order lead time: 2-7working days depend on quantity and products.
4.Shipping port: Shenzhen China or HK
5.Shipping term: EXW or FOB
Payment:
Acceptable by T/T, West Union, PayPal and L/C according to your requirement
Shipping
1.Once confirmed the order, and payment sent after finishing goods. 2.Goods will be sent within 7 days with the fast,reasonable and efficient shipping mode such as DHL, EMS, UPS,FEDEX, TNT, etc.
3.Please make sure your postal address is correct. Any lost and mistakes because of wrong address are not supplier's responsibility.
4.Please do not bid if you disagree with the shipping and handling charge.
Contact
1.Our working time:8:30am~5:30pm
2.All the inquiries will be replied within 24hours, So please feel free to send us your inquiry.
3.When our trade manager is off line, please feel free to leave a message, and tell us the products you need, our model number, and your E-mail address, we will reply to you within 24 hours too.
Any question about this sfp module transceiver,please leave me an inquiry or contact me directly.
You Might Also Like
Children′ S Bicycles 3-Year-Old Baby Bicycles 2-4-6-Ye......
Removable Plate Heat Exchanger with SS304 316L Plates
Automatic Parking Barrier Parking Position Lock
5 Axis CNC Precision Machining Vane Whee
Elite 24V 200ah Li-ion Phosphate Battery Green Energy LiFePO......
6015 Sculpture Art Wood Carving, Panel Automatic Cutting Mac......
13ft Folding Huge Outdoor Trampoline GS Certification
Wholesale Factory Made High Quality Hospital Bed Mattress To......
Four Color Polyester Film Flexographic Printing Machine
Zoomlion Bull Dozer O Ring 1081001402 for Zoomlion Bulldozer......
Diamond Drill