FDA&CE Certified Profession Clinical Home Use Dental Impression Materials Putty/Catalyst/Mouth Tray Custom

FIRST - IMPRESSION KIT

Use our kit to make molds of your teeth at home. It only takes about 20-30 minutes

Forget about expensive office visits. Your starter kit includes everything you need to take the photos and impressions your  orthodontist will use to evaluate your case and design your treatment plan.

Quality Control:

Working time:Putty-1 min. and 30sec.Wash-1 min.
Consolidation time: Putty-<4 min. Wash-5 min.
Mixing time:45sec.
Max. compressive deformation: <1.0%
recovery of elasticity:>99.0%
Max. dimensional change:after 24h within 0.3% and after 336h within 0.3%.

Putty Impression Material provides all the benefits of a true putty, including higher consistency and insertion force than heavy body materials.

Plus, it is designed exclusively for use with tMixing Unit - enabling reliable and reproducible dosage.

All impression materials get warmer - and therefore set faster -when placed in the mouth.

Putty material exits the 2 unit at approximately 97ºF.
Because Putty is already warm when it is seated in the mouth,

it helps warm up the wash material, actually accelerating setting time without reducing the intraoral working time.
Putty offers high detail reproduction and the same consistency and insertion force as conventional hand-mix putties.

Without the potential for negative interaction between putty and glove.

Step 1 : Deep clean your teeth.

Step 2 : Open 1 white Cap and 1 Blue Cap, Mix it.

Step 3 : Place mixed putty in tray.

Step 4 : Make impression of your upper and lower teeth.

Step 5 : Mail it to your dentist, and start Whitening Teeth.

Tip: You need to bite deep enough into the putty to fully capture your gum line. Gently bite all the way down until you feel your teeth come in light contact with the bottom of the tray. You should feel the putty push up out of the tray, enveloping your teeth and reaching up to your gums. You'll also feel a little bit of putty on the roof of your mouth behind your teeth. For your lower impressions, it helps to stick your tongue over the top of the tray while taking your dental impressions.

           Once your tray is fully seated, don't move or adjust the tray until it's time to remove it. Try not to laugh, sneeze or wiggle, and don't hold on to the tray handle. If you need to stabilize the tray, use your thumbs to gently hold the top tray in place. For your lower teeth, press down on the back of the tray with your peace-sign fingers.

Company Information

Dental Bright Technology is a leading manufacturer in the Oral Care industry.We are professional teeth whitening experts and manufacturer with over 13 years experience within the industry.we have  GMP ,CE, FDA, ROHS,UL,ISO22716,SGS, REACH , BPA FREE, MSDS, CPSR  etc.,We have all kinds of  complete  certificates for Teeth Whitening products with best quality assurance .we welcome yr visit to our factory.