Short Fiber  Non woven Geotextile  Introduction

Description:

PP short fiber needle punched nonwoven geotextile takes the polyproplene fiber short fiber as the primary material, after blooms the pine, to comb, disorderly, craft productions and so on shop net, acupuncture to become.


1. Strength--Under the same weight specification, the tensile strength in all directions is higher than other needle punched non-woven fabrics;
2. Anti-ultraviolet light-with extremely high anti-ultraviolet ability;
3. Extremely high temperature resistance performance-high temperature resistance, maintaining the integrity of the structure and the original physical properties at high temperatures;
4. Permeability and flat drainage-the geotextile is thick and needle-punched, has good flat drainage and vertical water permeability, and can still maintain this performance after many years;
5. Creep resistance--The creep resistance of geotextile is better than other geotextiles, so it has good long-term performance. It can withstand the erosion of common chemicals in the soil and the corrosion of gasoline, diesel, etc.;
6. Ductility-geotextile has a good elongation rate under certain stress, so that it can adapt to the uneven base surface;




 Technical Index Parameters 

How to install  geotextile fabric

Let us show you how easy the installation is and provide a few useful tips along the way. In our example,

Step 1 - Prep the road surface

First, you will need to excavate the roadway to the desired elevation. Then fully compact your subgrade, making sure you have removed all air and tightened the soil completely.

Step 2 - Unroll the reinforcement geotextile fabric

Roll the geotextile fabric on the compacted subgrade, making sure it's free of wrinkles and folds. Overlap your fabric as directed by the engineer. Cherokee can pre-sew the fabric for you if a stitch seam is required. Contact your Cherokee representative to get pricing on factory seamed rolls in a wider widths.

Step 3 - Sew the geotextile fabric

This job required the fabric to be stitched on the job site. The fabric needs to be seamed with a dual thread lock stitch to prevent it from unthreading. We have equipment available for purchase or rental to do the stitching on the job. At the engineers discretion you can choose a prayer seam, j-seam, or butterfly seam. In this example we will be using a j-seam. We recommend doing two stitches on each seam to prevent any failure during installation.

Step 4 - Apply Aggregate

Place your aggregate to the specified thickness, ensuring that no equipment drives directly on the engineered fill. Make sure the fill has reached full compaction before the final step.

Step 5 - Lay Asphalt

Now that you have placed your subbase you are ready for your pavement layer (or layers depending on the project type).

Company Introduction 

 

Company Production& Quality Inspection
Upholding the ambitious development vision. Innovative company takes the innovative cooperation as the permanent drive for the enterprise development. The company aspires to always standing in the forefront of the industry driven by a lot of efforts to closely cooperate with the international leading research institution and collages, continues to increase investment in research and development, strengthen the research team, and build the high standard experiment, technology center and testing center.

Company Certificate 

We are online 24 Hours Pls feel free to contact us if any requirement .