Precast Concrete Fleet Lift Anchor Spread Anchors Flat Foot Anchor Erection Anchor
China Precast Concrete Fleet Lift Anchor Spread Anchors Flat Foot Anchor Erection Anchor, Find details about China Flat Anchor, Two-Hole Anchor from Precast Concrete Fleet Lift Anchor Spread Anchors Flat Foot Anchor Erection Anchor
Basic Info.
Market
All Over The World
Customized Size
Plain Color, as Customized
Trademark
GME
Specification
1.25T- 20T
Origin
China
HS Code
8302410000
Market
All Over The World
Customized Size
Plain Color, as Customized
Trademark
GME
Specification
1.25T- 20T
Origin
China
HS Code
8302410000
Product Desciption
Flat anchor
GME Flat Anchor is an alternative to the plate anchor.
The main use is in elements with a concrete strength at lifting in excess of 25N/mm2
The Plate-Lift Flat Foot Anchor, also called The Lift Spread Foot Anchor, is a versatile anchor that can be used to back-strip and transport thin panels. This anchor may also be used to erect the panels. Its main application is thin-walled concrete elements, being lifted from horizontal to a vertical position. The special shape of the anchor head prevents the concrete from cracking. This kind of anchor is typically used with additional reinforcement, which is required for tilting and turning operations. The anchor's safe working load may be increased by adding four 18" lengths of #4 rebar as shown in the sketch. These anchors are commonly used in slabs/panels due to their capacities and low cost. Available in plain or hot-dipped galvanized finish.
| Load Group | Axial Load | Code | Dimensions (mm) |  | |||
| Tons | Tons | H | W | T | L | ||
| 2.5 | 1.4 | GME2005014065 | 65 | 30 | 6 | 70 | |
| 2.5 | 2.5 | GME2005025075 | 75 | 30 | 10 | 94 | |
| 5.0 | 3.0 | GME2005030090 | 90 | 40 | 10 | 100 | |
| 5.0 | 4.0 | GME2005040110 | no | 40 | 12 | 100 | |
| 5.0 | 5.0 | GME2005050125 | 125 | 40 | 15 | 105 | |
| 10.0 | 5.3 | GME2005053150 | 320 | 60 | 12 | 120 | |
| 10.0 | 7.5 | GME2005075170 | 170 | 60 | 16 | 120 | |
| 10.0 | 10.0 | GME2005100200 | 200 | 60 | 20 | 120 | |
| 26.0 | 12.5 | GME2005125220 | 220 | 80 | 20 | 200 | |
| 26.0 | 17.0 | GME2005170270 | 270 | 80 | 25 | 200 | |
| 26.0 | 22.0 | GME2005220310 | 310 | 120 | 30 | 200 | |
The safety Factor is 3:1.
Stainless Steel 304(A2)/316(A4) are available upon request Surface: Black(B)/Zinc Plated(Z.P)/Hot Dipped Galvanized(H.D.G) are available.
Two-Hole Anchor
·Used for stripping panels from tilt tables and tripping panels
·Also appropriate for high tension loads that cannot be held with other anchors or for panels constructed of lightweight concrete
·Safe working loads up to 10 tons
·Based on a 3:1 safety factor
| Load Group | Axial Load | Code | Dimensions (mm) |  | |||
| Tons | Tons | L | W | T | D | ||
| 2.5 | 1.4 | GME2001014090 | 90 | 30 | 6 | 14 | |
| 2.5 | 2 | GME2001020090 | 90 | 30 | 8 | 14 | |
| 2.5 | 2.5 | GME2001025090 | 90 | 30 | 10 | 14 | |
| 5 | 3 | GME2001030120 | 120 | 40 | 10 | 18 | |
| 5 | 4 | GME2001040120 | 120 | 40 | 12 | 18 | |
| 5 | 5 | GME2001050120 | 120 | 40 | 15 | 18 | |
| 10 | 5.3 | GME2001053160 | 160 | 60 | 12 | 26 | |
| 10 | 7.5 | GME2001075160 | 160 | 60 | 16 | 26 | |
| 10 | 10 | GME2001100170 | 170 | 60 | 20 | 30 | |
| 26 | 14 | GME2001140240 | 240 | 80 | 20 | 35 | |
| 26 | 17 | GME2001170300 | 300 | 80 | 25 | 35 | |
| 26 | 26 | GME2001220300 | 300 | 120 | 30 | 65 | |
Ring Lift Plate Anchor
· Used for face and back lifts of thin-walled units.
· Low profile with a wide, flat base for excellent
· anchorage
· Horizontal plate welded to the bottom gives
· creates high pull-out strength in stripping, handling, and erection applications.
· Based on a 4:1 safety factor
| Load Group | Axial Load | Code | Dimensions (mm) |  | |||
| Tons | Tons | H | W | f | e | ||
| 2.5 | 1.4 | GME2007014005 | 55 | 30 | 8 | 80 | |
| 2.5 | 2.5 | GME2007025080 | 80 | 30 | 8 | 80 | |
| 5 | 5 | GME2007050120 | 120 | 40 | 10 | 100 | |
| 10 | 10 | GME2007100160 | 160 | 60 | 12 | 140 | |
Drop Forged Foot Anchor
GME Drop Forged Foot Anchor is a high-strength, hot-forged anchor.
·Used for stripping panels from tilt tables and tripping panels
·Also appropriate for high tension loads that cannot be held with other anchors or for panels constructed of lightweight concrete
·Safe working loads up to 10 tons
·Based on a 4:1 safety factor
| Load Group | Axial Load | Code | Dimensions (Inch) | Hole |  | ||
| Tons | LBS | L | W | T | |||
| 2.5 | 3900 | GME2102025321 | 3-1/2 | 1-1/4 | 3/8 | 1 | |
| 2.5 | 4400 | GME2102025400 | 4 | 1-1/4 | 3/8 | 1 | |
| 2.5 | 4400 | GME2102025421 | 4-1/2 | 1-1/4 | 3/8 | 2 | |
| 2.5 | 4510 | GME2102025521 | 5-1/2 | 1-1/4 | 3/8 | 2 | |
| 2.5 | 5500 | GME2102025634 | 6-3/4 | 1-1/4 | 3/8 | 2 | |
| 5.0 | 4400 | GME2102050312 | 3-1/2 | 1-1/2 | 5/8 | 1 | |
| 5.0 | 6200 | GME2102050412 | 4-1/2 | 1-1/2 | 5/8 | 2 | |
| 5.0 | 8800 | GME2102050512 | 5-1/2 | 1-1/2 | 5/8 | 2 | |
| 5.0 | 11000 | GME2102050912 | 9-1/2 | 1-1/2 | 5/8 | 2 | |
| 10.0 | 6200 | GME2102100434 | 4-3/4 | 2-1/2 | 3/4 | 1 | |
| 10.0 | 8500 | GME2102100512 | 5-1/2 | 2-1/2 | 3/4 | 1 | |
| 10.0 | 12500 | GME2102100-7 | 7 | 2-1/2 | 3/4 | 2 | |
| 10.0 | 22000 | GME2102100-10 | 10 | 2-1/2 | 3/4 | 2 | |
Plate Lift Forged Erection Anchor
Forged Erection Anchor is specifically designed to provide greater lifting capacities for horizontal to vertical edge lifts. The anchors are forged to provide 20% greater safe working loads. The head of the anchor is designed with two protrusions or "ears" on the head of the anchor which provide protection against concrete spalling. These protrusions restrict the ring clutch rotation during lateral pulls. As a result, lateral forces are transmitted directly to the edge of the anchor instead of the concrete. The Anchors are available in plain or hot-dipped galvanized finishes.
| Load Group | Axial Load | Code | Dimensions (Inch) |  | ||
| Tons | LBS | L | W | T | ||
| 2.5 | 6000 | GME2104-2.5 | 8 | 2 | 3/8 | |
| 5.0 | 12000 | GME2104-5.0 | 10-3/8 | 2-1/2 | 5/8 | |
| 10.0 | 20000 | GME2104-10.0 | 12-3/4 | 3-3/4 | 3/4 | |
Fleet-Lift Drop Forged Erection Anchor with Shear Plate
GME Fleet-Lift Drop Forged Erection Anchor with Shear Plate eliminates the need for a shear bar.
| Load Group | Axial Load | Code | Dimensions (mm) |  | ||
| Tons | Tons | L | W | T | ||
| 2.5 | 6 | GME2105-2.5 | 8 | 2 | 3/8 | |
| 5.0 | 12000 | GME2105-5.0 | 10-3/8 | 2-1/2 | 5/8 | |
| 10.0 | 20000 | GME2105-10.0 | 12-3/4 | 3-3/4 | 3/4 | |
Spread Anchor
The spread anchor is very versatile. It provides an efficient anchorage in both thin panels and slabs. For special applications, additional reinforcement can be combined with the spread anchor by utilizing the extra hole.
Load range 0.7t to 22.0t
Safety factor: 3:1
| Load Group | Axial Load | Code | Dimensions (mm) |  | |||
| Tons | Tons | L | W | T | d | ||
| 2.5 | 1.4 | GME20030I4110 | 110 | 30 | 6 | 14 | |
| 2.5 | 1.4 | GME2003014160 | 160 | 30 | 6 | 14 | |
| 2.5 | 2 | GME2003020130 | 130 | 30 | 8 | 14 | |
| 2.5 | 2 | GME2003020160 | 160 | 30 | 8 | 14 | |
| 2.5 | 2 | GME2003020210 | 210 | 30 | 8 | 14 | |
| 2.5 | 2.5 | GME2003025150 | 150 | 30 | 10 | 14 | |
| 2.5 | 2.5 | GME2003025200 | 200 | 30 | 10 | 14 | |
| 2.5 | 2.5 | GME2003025250 | 250 | 30 | 10 | 14 | |
| 5 | 3 | GME2003030160 | 160 | 40 | 10 | 18 | |
| 5 | 3 | GME2003030200 | 200 | 40 | 10 | 18 | |
| 5 | 3 | GME2003030280 | 280 | 40 | 10 | 18 | |
| 5 | 4 | GME2003040180 | 180 | 40 | 12 | 18 | |
| 5 | 4 | GME2003040240 | 240 | 40 | 12 | 18 | |
| 5 | 4 | GME2003040320 | 320 | 40 | 12 | 18 | |
| 5 | 5 | GME2003050180 | 180 | 40 | 15 | 18 | |
| 5 | 5 | GME2003050240 | 240 | 40 | 15 | 18 | |
| 5 | 5 | GME2003050400 | 400 | 40 | 15 | 18 | |
| 10 | 5.3 | GME2003053220 | 220 | 60 | 12 | 26 | |
| 10 | 5.3 | GME2003053260 | 260 | 60 | 12 | 26 | |
| 10 | 5.3 | GME2003053340 | 340 | 60 | 12 | 26 | |
| 10 | 7.5 | GME2003075260 | 260 | 60 | 16 | 26 | |
| 10 | 7.5 | GME2003075300 | 300 | 60 | 16 | 26 | |
| 10 | 7.5 | GME2003075420 | 420 | 60 | 16 | 26 | |
| 10 | 10 | GME2003100300 | 300 | 60 | 20 | 26 | |
| 10 | 10 | GME2003100370 | 370 | 60 | 20 | 26 | |
| 26 | 10 | GME2003100520 | 520 | 60 | 20 | 26 | |
| 26 | 14 | GME2003140370 | 370 | 80 | 20 | 35 | |
| 26 | 14 | GME2003140460 | 460 | 80 | 20 | 35 | |
| 26 | 22 | GME2003220500 | 500 | 80 | 25 | 35 | |
| 26 | 22 | GME2003220620 | 620 | 80 | 25 | 35 | |
Unilateral Erection Anchor
GME Unilateral Erection Anchor is a similar Application as Erection Anchor.
In contrast to the erection anchor, a Unilateral erection anchor can only be subjected to load in one direction. Its shape makes it particularly suitable for thin components.
A semi-circular notch is provided for the fitting of the turning reinforcement.
Safety factor: 3:1
| Load Group | Axial Load | Code | Dimensions (mm) |  | ||
| Tons | Tons | L | W | T | ||
| 2.5 | 1.4 | GME2004014200 | 200 | 40 | 6 | |
| 2.5 | 2.5 | GME2004025230 | 230 | 40 | 10 | |
| 5 | 4 | GME2004040270 | 270 | 55 | 12 | |
| 5 | 5 | GME2004050290 | 290 | 55 | 16 | |
| 10 | 7.5 | GME2004075320 | 320 | 80 | 16 | |
| 10 | 10 | GME2004100390 | 390 | 80 | 20 | |
| 26 | 12.5 | GME2004125500 | 500 | 114 | 20 | |
| 26 | 17 | GME2004170500 | 500 | 114 | 25 | |
| 26 | 22 | GME2004220300 | 500 | 114 | 30 | |
Sandwich Panel Anchor
GME Sandwich Panel Anchor is specially designed for use with precast sandwich panels.
Safety factor: 3:1
| Load Group | Axial Load | Code | Dimensions (mm) |  | ||
| Tons | Tons | L | W | T | ||
| 2.5 | 2.5 | GME2006025250 | 250 | 40 | 10 | |
| 5 | 5 | GME2006050300 | 300 | 60 | 16 | |
| 10 | 7.5 | GME2006075350 | 350 | 80 | 16 | |
| 10 | 10 | GME2006100350 | 350 | 80 | 20 | |
| 26 | 17 | GME2006170400 | 400 | 100 | 20 | |
Erection anchor
Erection anchor The special-shaped anchor head means that the pitching/turning loads are taken by the anchor and not to the concrete. This helps prevent the ling of the concrete. The anchors are notched to assist with the placement of additional reinforcement required in the pitching/turning operation.
Load range 1.4t to 22.0t
| Load Group | Axial Load | Code | Dimensions (mm) |  | ||
| Tons | Tons | L | W | T | ||
| 1.25 | 1.25 | GME2002-1.25 | 120 | 30 | 6 | |
| 2.5 | 1.4 | GME2002014200 | 200 | 55 | 6 | |
| 2.5 | 2.5 | GME2002025230 | 230 | 55 | 10 | |
| 5 | 4 | GME2002040270 | 270 | 70 | 12 | |
| 5 | 5 | GME2002050290 | 290 | 70 | 16 | |
| 10 | 7.5 | GME2002075320 | 320 | 95 | 16 | |
| 10 | 10 | GME2002100390 | 390 | 95 | 20 | |
| 26 | 12.5 | GME2002125500 | 500 | 148 | 20 | |
| 26 | 17 | GME2002170500 | 500 | 148 | 25 | |
| 26 | 22 | GME2002220300 | 500 | 148 | 30 | |
X-Foot Erection Anchor
For horizontal to vertical edge lifts and the shear rotation of thin-walled units.
· Specially designed head provides added protection against spalling
· For lifts applying shear and tension to the anchor
· Specially designed body allows for all reinforcement
· Available in 2T, 4T, or 8T capacities
· Based on a 4:1 safety factor Superior Design Two steel protrusions or "ears" on the head of the anchor provides added protection against spalling. These ears hug either side of the ring clutch, restricting its rotation during lateral pulls. As a result, lateral forces are transmitted directly to the edges of the anchor instead of the concrete.
The body of the Erection Anchor is shaped to allow full reinforcement for secure support.
| ANCHOR TONNAGE | CLUTCH ID | WIDTH (W) | LENGTH (L) | THICKNESS (T) | SWL4:1 SF TENSION W/TENSION BAR | WEIGHT EACH | WORKING LOAD REINFORCED 2000 PSI CONCRETE TENSION | MIN. EDGE DISTANCE | WEIGHT EACH |  |
| tons | # | in. | in. | in. | lb | lb | lb | in. | lb | |
| 2T | 2-2.5T | 2 | 8 | 3/8 | 4.000 | 1.59 | 4.000 | 4-1/2 | 0.89 | |
| 4T | 4-5T | 2-1/2 | 9-1/2 | 5/8 | 8,000 | 4.20 | 8,000 | 6 | 1.21 | |
| 8T | 8-10T | 3-1/2 | 13-1/2 | 3/4 | 16,000 | 9.30 | 8,000 | 7 | 1.69 |
Ring Lift Erection Anchor with Shear Plate
Combines the reinforcing capabilities of the Ring Lift Anchor with the spall-free performance of an Erection Anchor
· The shear plate replaces the need for a shear bar making it easier to install
· Ideal for an "A" frame or tilt table or whenever the lift is not straight up
· For lifts that entail only anchor tension
· Shear capacity is less than the standard erection anchor due to the shorter length
· The anchor's head loads are equal to the standard erection anchor due to length
· Convex sides build better strength without adding material
· Available in 2T, 2.5T, 4T, 5T, 8T, 10T capacities
· Based on a 4:1 safety factor
| Load Group | Axial Load | Code | Dimensions (mm) |  | ||
| Tons | Tons | L | W | T | ||
| 2.5 | 2.0 | GME2010020200 | 200 | 55 | 10 | |
| 5.0 | 4.0 | GME2010040270 | 270 | 70 | 16 | |
| 10.0 | 6.0 | GME2010060325 | 325 | 95 | 16 | |
| 10.0 | 8.0 | GME2010080325 | 325 | 95 | 20 | |
You Might Also Like
Low Cost 2-8mm Coffee Husk Hen Feed Press for Pakistan
Nice Design 90km Mileage Electric Scooter with Front Basket
A356 Aluminum Sand Casting Parts
3-Blade Aluminum Outboard Propeller
Mercedes Benz W639 Vito Viano Air Compressor 6393200204 6393......
Made in China Metal Zinc Alloy Soft Enamel Sport Medallion C......
10t 30t 40t Locosc Shear Beam Weighing Load Cell for Weighbr......
4.1kwh Lithium Battery Wall Mount LiFePO4 24V 160ah Deep Cyc......
A3 Size DTG Tshirt Jeans Jackets Printer for Dark Light Colo......
PVC Co-Extrusion Foam Board with Cheaper Price
Superior Popular Art Fineliner Drawing Pen with Water Proof ......