Products

Concrete PP Synthetic Fiber with High Aspect Ratio Polypropylene Fibre

China Concrete PP Synthetic Fiber with High Aspect Ratio Polypropylene Fibre, Find details about China Concrete Anti-Crack Fiber, Synthetic Macro Fiber from Concrete PP Synthetic Fiber with High Aspect Ratio Polypropylene Fibre

Model NO.
0.2mm
Tensile Strength
500MPa
E-Modulus
5000MPa
Purity
100%
Trademark
SAPEN
Transport Package
Bag+Pallet
Specification
6mm/12mm/18mm
Origin
Shanghai, China
HS Code
3916909000
Model NO.
0.2mm
Tensile Strength
500MPa
E-Modulus
5000MPa
Purity
100%
Trademark
SAPEN
Transport Package
Bag+Pallet
Specification
6mm/12mm/18mm
Origin
Shanghai, China
HS Code
3916909000

  Concrete 0.2mm diameter Synthetic PP Fiber

 
Description
    0.2mm synthetic fiber is made of Polypropylene. It is used as an alternate to steel fibers and welded wire mesh for precast concrete and shotcrete reinforcement applications.
Specification for Fiber Reinforced Concrete and Shotcrete, and are specifically used to improve impact, shatter and abrasion resistance, to increase fatigue resistance,to increase toughness of concrete and provide long term durability of concrete and cement based building products.
Application
  • Shotcrete
  • Channel and tunnel lining
  • Mining
  • Precast concrete
  • Structural rehabilitation
  • Roads and bridge
  • Floor screed
  • Sprayed concrete
  • Improvement fire resistance
Benefits
  • Provides three-dimensional reinforcement against micro and macro-cracking.
  • Provides good impact,fatigue,shrinkage control and ductility in all grade concretes.
  • Cost saving,Is easier to use,to disperse and safe to handle ,reduce equipment wear, fiber rebound and increases build-up thickness compared with steel fibers for shotcrete applications
  • Can be used in highly corrosive circumstance.
  • The surface has been embossed,which greatly improves the cohesive force between fibres and concrete,and also boosts shrinkage resistance and crack resistance.
Technical Information
Minimum Tensile Strength>500 MPa
Modulus >5000MPa
Fibre dimensionL: 6mm / 8mm / 12mm /18mm;
D:0.2mm
Equivalent diameter:0.2mm
Melt Point170ºC
Density0.91g/cm3                                             
Melt flow3.5
Acid&Alkali ResistanceExcellent
Moisture Content≤0%
Appearance Transparent

Guidelines for use
Dosage is dependent on the application and should be 1.8 to 9kg/ m3 (3 to 15lbs/yd3).
The fibres are wrapped with water-soluble film and uniquely packaged in paper boxes.Then just throw the whole boxes of fibres into the concrete mixture, the boxes and film then dissolve within seconds, leaving the fibres to disperse evenly throughout the mixture.

Packing
5kg/box,1200kg/pallet,12000kg/20'container,24000kg/40'container, can be customized as required.

How to manufacture fiber and used in Floor anti-crack
Concrete PP Synthetic Fiber with High Aspect Ratio Polypropylene Fibre

Concrete PP Synthetic Fiber with High Aspect Ratio Polypropylene Fibre
Concrete PP Synthetic Fiber with High Aspect Ratio Polypropylene FibreAnti-crack fiber in concrete

Q: Can I have a sample order?      
A: Yes,and we can provide 1kg free sample for customer.

Q: How do you ship the samples and how long does it take arrive?        
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes around one week.

Q:  Can I visit your factory?        
A: Yes,welcome.

Q: Can you accept mixed batch of different products?          
A: Yes, we are support different product mix wholesale, please communicate with us your detail demands.

Q: How long is your lead time?
A: Normally lead time is 5-10 days. It is depend on the quantity and request, please communicate with us your detail demands.

 

You Might Also Like