Electronics Stability Temperature and Humidity Testing Chamber
By testing the electronical components under different environmental conditions to see whether their performance can meet the intended requirements. This kind of test chamber is widely applied in the industries of electronics electrical equipment, vehicle, metal, building materials, luggage, printing, packaging, and other product components and materials.

Feactures:
1. Use the high precision microcomputer touch temperature and humidity controller with high stability of platinum resistance to temperature and wind speed in the circulatory system of temperature and humidity test.
2. Control temperature& humidity well-distributed, precisely and steady.
3. Completely independent system separate for testing in constant temperature&humidity environment.




Benefits more than you can get from other supplier.
1)Delicate touch and excellent user experience
2)Unique and compact design, top grade appearance, stable performance and easy operation.
3)Can simulate a wide range of temperature and humidity environments
4)Capable of testing large components, assemblies, and finished products
5)Customized sizes and configurations available
6)1 year warranties

Description:
Workspace volume: (W)600 x (H)600 x (D)460mm
Exterior size: (W)880 x (H)1730 x (D)1400mm
Temperature range: -20~-150° C
Temperature constancy: ± 0.5° C
Temperature uniformity: ± 2.0° C
Temperature change rate: -20~+100° C within 35 minimum (with empty load), +20~-20° C within 60min (with empty load)
Humidity range: 20 - 98% RH
Humidity uniformity: ± 3.0% RH
Humidity constancy: ± 2.5% RH

Insulation:
Exterior, baked painting steel or stainless steel (SUS304)
Interior, mist finishing stainless steel (SUS304)
Insulation material, rigid polyurethane foam and glass fiber
Door: Heating wire was installed to prevent condensation in case of low-temperature
Inspection window (W X H): 2 sets 2, 470 X 570mm inspection window, made of multi-layer coated hollow electric glass, effectively insulation and prevents condensation
Light device: 11W/220V AC X 1 installed on the inspection window
Water outlet: Water outlet available for condenser
Water replenishment: Water pump

Descriptions:
Standard configurations:
Sight window X 1
Cable port (port Ø 50mm) X 1
Shelves X 2
Chamber lamp X 1
Power cable X 2m
No fuse breaker, over-pressure, over-heat and over-current for compressor, over-temperature, overloading of blower, dry heat-protection
Optional accessories:
Cable port: Ø 100mm is available
Shelves
RO-type water purifier: R-80/day
Provided to keep the humidifying heater and wet bulb wick free from scale
Inner glass door with operating port: A glass door can be provided behind the main door so that specimens can be observed
Two operating ports of 130mm diameter are used for handing specimens inside the chamber without opening the glass door
Dehumidifier: The rotation regenerating dehumidifier M-120 ensures precise control of low-humidity (5° C 5% RH) for electronics

Besides this, we also provide:
Solar Panel Module Test Chamber
3-zone Thernal Shock Chamber
2-zone Thermal shock Chmaber( Basket -style Thermal Shock Chamber)
Rapid Temp. Change Chamber
High &Low Temperature Altitude Test Chamber
Temperature/Humidity/vibration three integrated chamber
Precise Drying Test Chamber
Vacuum Oven
No oxidation oven
Air Exchange Type Aging Oven
Burn-in Room
Salt Spray Chamber
Two Wings Drop Tester
Vibration Testing Machine

Technical parameter is as below: