China Fiber Laser Engraving & Cutting machine, Find details about China Marking Machine, Fiber Laser Engraving Machine from Fiber Laser Engraving & Cutting machine
| Fiber laser engraving & cutting machine |
| DAPENG YLP-20 TECHNICAL SPECIFICATIONS | |
| Laser-type | Fiber laser tube. |
| Laser power | 20 Watts (30W and 50W also available) |
| Working area | Standard:100mm x100mm Maximum:300 mm x 300mm |
| Work table | Removable Honeycomb (Stripped also available) |
| Driving system | 2-phase step motor driver |
| Engraving speed | 0-1016 mm/s |
| Max cutting speed | 7000 mm/s |
| Resolution ratio | 4000 DPI |
| Working voltage | Standard 220V AC+/- 10% 50-60Hz 15 Amp single phase (110 V AC available upon request). |
| Operating temperature | 10-40 °C |
| Operating humidity | 5- 75% Non condensing. |
| Control Software | EZard (included) for vectors and graphics processing. |
| Graphic format supported | BMP, JPG, GIF, JPEG, and JPE. |
| Vector format supported | ai, cut, dsb, dst, dxf, nc, oux, out, plt, smc, yln, ymd, saw, dat. |
| Precision tolerance | 0.0079 inch. |
| Laser output power control | 1-100% software setting. Manual adjustment integrated. |
| Highest scanning precision | 1270 DPI. |
| Color assignment | Uses color property to set layer parameters, speed, and laser min and max power. |
| Input ports | Two USB 2.0 interface ports for PC and Flash drives |
| Cooling system | Electronically controlled Industrial water chiller (optional). |
| Extraction system | Industrial exhaust blower with 12' of flexible tubing (optional) |
| Laser beam tracing system | Red dot pointer |
| Control panel | Illuminated, multilingual, LCD control panel |
| Safety features | Safety keyed switch, Emergency "STOP" button. |
| Air assist system | Air compressor (optional) and air flow regulating valve |
| Voltage regulator | SVC-3000VA (optional) |
| Machine dimensions | 53"Wide x 39"Deep x 44"High. |
| Machine weigh | 180 Kgs. |
| Crate dimensions | 820 x 690x 1550mm. |
| Crated weight | 200 Kgs. |