• High degree of protection
• Waterproof membrane
• Easy to installPressure differentials in enclosures with a high degree of protection are a result of internal and external temperature
changes. In the case of negative pressure or partical vacuum, dust and humidity can enter the enclosure through the
door seal. When the air inside the enclosure cools down, condensation may occur because the humidity cannot escape
the enclosure. The easy-to-install pressure compensation device DA 284 provides compensation of pressure at a
protection degree of IP66 (M12: IP68). Even with a slight overpressure, a waterproof membrane inside the plug allows
the humidity to escape whilst blocking water and dirt from entering the enclosure.DA 284 |
Mounting | thread M40 x 1.5 or M12 x 1.5 with nut |
Torque | M40: 5Nm (max. 10Nm), M12: 0.5Nm (max. 1Nm) |
Depth in enclosure | M40: approx. 16mm, M12: approx. 8mm |
Sealing | sealing gasket NBR |
Material | plastic, light grey |
Filter | waterproof membrane |
Dimensions | M40: Ø 60 x 37mm, M12: Ø 17 x 17.5mm |
Fitting position | variable |
Installation: Make cut-out Ø 40.5+0.5mm in enclosure wall for size M40 or Ø 12+0.2mm for size M12, and mount
pressure compensation device with nut. Please make sure that the sealing gasket is put in place on the outer side panel
of the enclosure. For optimal pressure compensation we recommend to use two devices on opposite sides towards the
top of the enclosure.