Cr27 3/2 C-Np-Ah Fly Ash and Coal Ash Pumping Slurry Pump
China Cr27 3/2 C-Np-Ah Fly Ash and Coal Ash Pumping Slurry Pump, Find details about China Slurry Pump, Giw Pumps from Cr27 3/2 C-Np-Ah Fly Ash and Coal Ash Pumping Slurry Pump
Basic Info.
Model NO.
3/2C-NP-AH
Position of Pump Shaft
Horizontal Pump
Pump Casing Combined
Horizontal Split Pumps
Mounting Height
Suction Centrifugal
Impeller
Open
Usage
Pump, Pumps, Condensate Pump, Ash Pumps, Circulating Pump
Product Name
Gold Mine Slurry Pumps for Mineral Processing
Wet End Parts
High Chrome Alloy
Size
1′′-18′′
Drive Type
CV/Dcz/Zvz/Crz
Seal Type
Packing Gland/Expeller/Mechanical Seal
Trademark
Naipu
Transport Package
Wooden Case
Specification
3/2C-AH
Origin
China
HS Code
8413701090
Model NO.
3/2C-NP-AH
Position of Pump Shaft
Horizontal Pump
Pump Casing Combined
Horizontal Split Pumps
Mounting Height
Suction Centrifugal
Impeller
Open
Usage
Pump, Pumps, Condensate Pump, Ash Pumps, Circulating Pump
Product Name
Gold Mine Slurry Pumps for Mineral Processing
Wet End Parts
High Chrome Alloy
Size
1′′-18′′
Drive Type
CV/Dcz/Zvz/Crz
Seal Type
Packing Gland/Expeller/Mechanical Seal
Trademark
Naipu
Transport Package
Wooden Case
Specification
3/2C-AH
Origin
China
HS Code
8413701090
Product Desciption
Cr27 3/2 C-NP-AH Fly ash and Coal Ash Pumping Slurry Pump
Naipu® NAH series centrifugal slurry pumps and spare parts can fully interchange.These pumps are of heavy-duty construction,designed for continuous pumping of highly abrasive and corrosive slurries.They feature a wide choice of replaceable abrasion resistant metal or moulded elastomer casting liners and Impellers,which are all interchangeable within a common casting assembly.
| Descrition | Value |
| Products Name | Horizontal Slurry Pump |
| Discharge Size | 1 - 18 inch |
| Flow (m3/h) | 12.6-5400m3/h |
| Head (m) | 6-118m |
| Max Power(kw) | 1200kw |
| Material | High Chrome A05, Cr27- Cr 30%, Rubber R55, R33 etc. |
| Drive Type | CV / ZVz/ CRz/ DCz/CL |
| Drived Engine | Motor or Diesel |
| Seal Type | Packing Seal, Expeller Seal, Mechanical Seal,Dyna Seal |
| MQQ | 1 set |
| Payment Term | TT, LC, or Negotiate |
| Original | ShiJiaZhuang, Hebei China |
| Supply Range | Slurry Pump, Motor, Base Plate, Guard, V-belt, Pulley |
| Weight | -- |
| Delivery Term | By Sea, By air, By TNT, DHL, By Train |
Typical Applications--
Minerals Flotation Processing
Electric Factory Coal Preparation
Coal Washing
Chemical Medium Processing
Effluent Handling
Salt and Sugar IndustrySand And Gravel Handling
Construction Drawing
| LINERS | IMPELLERS | CASING | BASE | EXPELLER | EXPELLER RING | SHAFT SLEEVE | SEALS | |
| Standard | Chrome Alloy Natural Rubber | Chrome Alloy Natural Rubber | SG Iron | SG Iron | Chrome Alloy or SG Iron | Chrome Alloy or SG Iron | SG Iron | Rubber and Nitrile |
| Options | Ferralium Hastelloy C 316 SS W151 Polyurethane Neoprene Butyl Viton Nitrile EPDM Hypalon | Ferralium Hastelloy C 316 SS W151 Polyurethane Neoprene Butyl Nitrile Hypalon | SG Iron Various grades | MS Fabricated Cast Iron | NI Resist Ferralium Hastelloy C Polyurethane 316 SS W151 | NI Resist Ferralium Hastelloy C 316 SS Rubber W151 Polyurethane Neoprene Butyl Nitrile | EN56C Ferralium Hastelloy C Titanium 316 SS 304 SS | Ceramic Stellite Chrome Oxide Nordel Neoprene Viton |
Pump Performance Parameters
Naipu® NAH METAL LINER PUMP WORK PARAMETER
| Type | Allowable Mating Max.Power(Kw) | Clear Water Performance | Impeller | |||||
| Capacity/Q m³/hr | Head/m | Speed/rpm | Max Efficiency/% | NPSH/m | Nos of Vane | Impeller Diameter/mm | ||
| 1.5/1NAH | 15 | 12.6--28.8 | 6--68 | 1200--3800 | 40 | 2--4 | 5 | 152 |
| 2/1.5NAH | 15 | 32.4--72 | 6--58 | 1200--3200 | 45 | 3.5--8 | 5 | 184 |
| 3/2NAH | 30 | 39.6--86.4 | 12--64 | 1300--2700 | 55 | 4--6 | 5 | 214 |
| 4/3NAH | 30 | 86.4--198 | 9--52 | 1000--2200 | 71 | 4--6 | 5 | 245 |
| 6/4NAH | 60 | 162--360 | 12--56 | 800--1550 | 65 | 5--8 | 5 | 365 |
| 8/6NAH | 300 | 360--828 | 10--61 | 500--1140 | 72 | 2--9 | 5 | 510 |
| 10/8NAH | 560 | 612--1368 | 11--61 | 400--850 | 71 | 4--10 | 5 | 686 |
| 12/10NAH | 560 | 936--1980 | 7--68 | 300--800 | 82 | 6 | 5 | 762 |
| 14/12NAH | 560 | 1260--2772 | 13--63 | 300--600 | 77 | 3--10 | 5 | 965 |
| 16/14NAH | 1200 | 1368--3060 | 11--63 | 250--550 | 79 | 4--10 | 5 | 1067 |
| 20/18NAH | 1200 | 2520--5400 | 13--57 | 200--400 | 85 | 5--10 | 5 | 1370 |
Drive Type:
There are mainly 4 installation types,
1.DCz Type
The output shaft of a motor is directly connected to the input shaft of a pump via a pump coupler.This type of connection is suitable for applications where the speed of the slurry pump is the same as that of the motor.
2. CVz Type.
The pump is driven by a belt connected to the crankshaft of the engine.This way of connection allows for saving space,easy installation,and fast adjustment of pumping speed.The motor is fixed to the motor support frame which is located on the bearing support above the slurry pump.
3.ZVZ Type
Another type of belt drive that allows easy adjustment of pumping speed.The motor is directly fixed to the bearing support.This way of installation is suitable for motors with large horsepower than is possible with CV type of installation.Due to the installation of motor onto the bearing support,this method helps save installation space.
4.CRz Type
This type of belt drive makes it easier to adjust pumping speed.The installation allows both the motor and slurry pump to be fixed to the ground.The motor is installed to the side of the pump.The installation method is suitable for large-power motors.
Seal Types:
There are 3 seal types,expeller seal,packing seal and mechanical seal.
(1) Expeller Seal. Use pressure seal produced by impeller and expeller in series,packing or lip sealing ring for shut down seal.The main parts are Expeller ring,Expeller,Packing,Packing Gasket,Water Seal Ring ,Packing Gland,Oil Cup
(2) Packing Seal. The routine sealing systems are suitable for various conditionsand can be used in the corrosion or high temperature conditions such as teflon packing,graphite packing etc.It also can be used in strong abrasive condition duty with shaft ceramic sleeve of spray weld. The main parts are Packing Box,Front water seal Ring,Packing,Packing Gland,Shaft Sleeve.
(3)Mechanical Seal. World-advanced technique without sealing leakage,integrating construction,convenient installation & replacement,various constructions suit for all kinds of conditions.High hardness ceramic and alloy are adopted for material of friction parts.Design & matching of mechanical seal & sealing box is suitable for fluid state.It possesses high abrasive resistance & shakeproof to guarantee that sealing effect can be satisfied by customers in various conditions.The main parts are stationary ring assembly and Movable ring assembly.
Parts Material
| Spare part Name | Material | Specification | HRC | Application | OEM Code |
Liners&Impellers | Hard Metal | High Chrome White Iron 23-30% | ≥56 | Used for higher wear conditions with pH Between 5 to 12. | A05 |
| 15/3Chrome/Moly Iron | ≥59 | With moderate erosion resistance | A07 | ||
| ULTRACHROME 28% Cr, Low C | 43 | Used for FGD and other corrosive application | A49 | ||
Rubber | Standard Impeller Rubber | Used for superior erosive resistance required | R08 | ||
| Standard liner Rubber | Have superior erosion resistance | R26 | |||
| Natural Rubber- Reinforced | Sufficient wear life | R33 | |||
| Nature Rubber | Cut resistance to hard, sharp slurries | R55 | |||
| Expeller & Expeller Ring | Metal | ULTRACHROME 27%Cr | ≥56 | Used for higher wear conditions with pH Between 5 to 12. | A05 |
| Grey Iron | High physical strength | G01 | |||
| Stuffing Box | Metal | ULTRACHROME 27%Cr | A05 | ||
| Grey Iron | G01 | ||||
| Frame/cover plate Bearing Housing& base | Metal | Grey Iron | G01 | ||
| Ductile Iron | D21 | ||||
| Shaft | Metal | Carbon steel | E05 | ||
| Shaft Sleeve Lantern Ring/ Restrictor Neck Ring/ Gland Bolt | Stainless Steel | 4Cr13 | C21 | ||
| 304SS | C22 | ||||
| 316SS | C23 | ||||
| Joint Rings & Seals | Rubber | Butyl Rubber | S21 | ||
| EPDM Rubber | S01 | ||||
| Nitrile | S10 | ||||
| Hypalon | S31 | ||||
| Neoprene | S11/S42 | ||||
| Viton | S50 |
Product Overview:
For the AH pump types,we can provide as below,
1.5/1B-AH(R) 2/1.5B-AH(R) 3/2C-AH(R) 4/3C-AH(R) 6/4D-AH(R) 6/4E-AH(R) 8/6E-AH(R)
8/6R-AH(R) 10/8F-AH(R) 10/8ST-AH(R) 12/10ST-AH(R) 12/10FF-AH(R) 14/12G-AH(R)
14/12ST-AH(R) 16/14TU-AH(R) 20/18TU-AH(R)
Our Workshop Show:
NAIPU PUMP is a whole processing company, Start from Modeling Workshop,Casting Workshop,Heat treatment Workshop,Machining Workshop ,Assembly Workshop and Pump Testing Workshop are all by us. So we are modernization and integrated company to satisfy the requirement of the changing needs of market.
We set various check points along the whole production line,which throughout Raw Material,Charging Material,Surface and Heat Treatment checking,Material Analysis,Spare Testing and Pump Testing etc.
Naipu Inspection Facilities
Possible Faults and Settlements
| Faults | Reason | Settlement |
| 1.Pump fails to discharge any water,The hand of pressure gauge beat violently | 1.Suction pipe don't have enough water. 2.Suction pipe blocked or the valve is locked. | 1. Inject enough water 2.unlock the inlet valve,clear the blocks 3.Exclude the air leakage |
| 2.The pump can't discharge water,the hand of vacuum meter beat heavily. | 1.The inlet valve is unlocked or silted up. 2.The resistance of suction pipe is too big or silted up. 3.The height of suction is too high. | 1.Unlock the valve or desilting 2.improve the design of suction pipe or desilt 3.Lower the height of the installation. |
| 3.The pump can't discharge water,pressure gauge shows heavy pressure. | 1.The resistance of the discharge pipe is too big. 2.The impeller blocked 3.The speed is slow. | 1.Check and adjust the outlet pipe. 2.Clear the impeller 3. Improve the speed. |
| 4.The pump doesn't rotate | The volute is silted up by the blocks. | Clear the blocks |
| 5.The capacity is not enough | 1.The blocks of the impeller or the inlet or outlet pipe. 2.The abrasion of the impeller is heavily. 3.The speed is low to normal 4.Pump is installed unreasonably or the leakage of the inlet pipe. 5.The transporting height is too high,the loss of the resistance of the inside pipe are too big. 6.The inlet valve not open enough or blocked 7.The packing seal leaks | 1.Clear the impeller or pipe. 2.Change the impeller 3.Adjust the speed 4.Install again or stop leaking.
|
| 6.The motor of the pump is overloaded | 1.The head of the pump exceeds the head of the working condition. 2.Not consider the slurry density when selecting the pump. 3.The packing press tightly | 1.Turn down the outlet valve,cut the impeller or lower the speed. 2.Select the motor again. 3.Adjust the the screw of the packing gland |
| 7.Abnormal sound in the pump, and no water out | 1.The resistance of the inlet pipe is too big. 2.The height of the suction is too high. 3.Cavitation occurred
|
|
| 8.pump vibrates | 1.pump cavitate 2.The block of the impeller single vane 3.The no concentricity between the pump shaft and motor shaft 4.Fasteners or foundation loose | 1.Adjust the water valve ,lower the height of the installation,reduce the resistance of the inlet. 2.Clear the impeller 3.Alignment again 4.Fasten the screw,and reinforce the foundation. |
| 9.Bearing is overheat | 1.lock the cooling water 2.lubrication is not good. 3.the lubrication oil is not clear 4.the wrong direction of the thrust bearing. 5.there is something wrong with the bearing. |
|
| 10.Packing short life | The material of packing is not good | Change the packing |
| 11.pump leak oil | 1.High oil level 2.The rubber parts invalid 3.Assembly problem | 1.Lower the oil level 2.Change rubber spares 3.Adjust the assembly |
| 12 Pump head leaking | 1.The rubber parts not press well | Assembly again or press tightly |
Applications
Alumina / Copper / Oil Shale / Asbestos /Electric Utilities /Phosphate /Bauxite /Gold / Potash /Buliding Products /Iron Ore / Paper & Pulp /Cement /Lead & Zinc /Sand & Gravel / Coal /Mineral Sands /Silver Chemical Fertilizer/Molybdenum /Steel /Wolfram & Scheelite /Sugar /Titanium /Water &Sewage Utilities /Tin /Tobacco
Heavy Mining | Mineral Processing | Sand and Gravel |Coal Prep | Cyclone Feeds | Aggregate Processing | Fine Primary Mill Grinding | Chemical Slurry Service | Tailings | Secondary Grinding | Industrial Processing | Pulp And Paper | Food Processing | Cracking Operations | Ash Handling | Pipeline Transport | High Velocity Hydraulic Transport |Food Processing | Explosive Sludge In Metal Smelting | River And Pond Dredging | Heavy Refuse Removal | Larger Particle Or Low NPSHA Applications | Continuous (Snore) Sump Pump Operation | Abrasive Slurries | High Density Slurries | Large Particle Slurries | Sump Drainage | Wash down | Floor Drainage | Mixing | Iron Ore | Cooper | Diamond | Alumina | Coal | Gold | Kaolin | Phosphorite | Steel | Palm | Suger | Chemical | Power | FGD | Frac Sand Blending | Construction | City Sewage | etc.
Contact Us
Contact Person: Karen Tan
Welcome to visit our factory !
You Might Also Like
Low Cost 2-8mm Coffee Husk Hen Feed Press for Pakistan
Nice Design 90km Mileage Electric Scooter with Front Basket
A356 Aluminum Sand Casting Parts
3-Blade Aluminum Outboard Propeller
Mercedes Benz W639 Vito Viano Air Compressor 6393200204 6393......
Made in China Metal Zinc Alloy Soft Enamel Sport Medallion C......
10t 30t 40t Locosc Shear Beam Weighing Load Cell for Weighbr......
4.1kwh Lithium Battery Wall Mount LiFePO4 24V 160ah Deep Cyc......
A3 Size DTG Tshirt Jeans Jackets Printer for Dark Light Colo......
PVC Co-Extrusion Foam Board with Cheaper Price
Superior Popular Art Fineliner Drawing Pen with Water Proof ......