Automatic/Manual Curing Process Tooling Line Powder Coating Oven/Spray Booth/Industrial Drying Oven
China Automatic/Manual Curing Process Tooling Line Powder Coating Oven/Spray Booth/Industrial Drying Oven, Find details about China Painting Booth, Powder Coating Oven from Automatic/Manual Curing Process Tooling Line Powder Coating Oven/Spray Booth/Industrial Drying Oven
Basic Info.
Model NO.
SIBB0001
Operation Pressure
Atmospheric Pressure
Operational Method
Intermittent
Widely Use
Motor, Auto Vehicle, Chemical, Electronics
Temperature Range
Rt+0~800deg. C.
Heating Source
Electrical, Gas, Steam, Air Energy
Power Control
SSR/SCR
Control Model
Instrument Control, HMI Control, Network Control
Trademark
SIBO. X
Transport Package
Wooden Packing
Specification
customized
Origin
China
HS Code
8514300090
Model NO.
SIBB0001
Operation Pressure
Atmospheric Pressure
Operational Method
Intermittent
Widely Use
Motor, Auto Vehicle, Chemical, Electronics
Temperature Range
Rt+0~800deg. C.
Heating Source
Electrical, Gas, Steam, Air Energy
Power Control
SSR/SCR
Control Model
Instrument Control, HMI Control, Network Control
Trademark
SIBO. X
Transport Package
Wooden Packing
Specification
customized
Origin
China
HS Code
8514300090
Product Desciption
powder coating is a new coating process developed rapidly in recent decades. The raw material used is plastic powder. In recent years, due to the importance of environmental protection in various countries, powder coating without pollution to water and air, has been developed rapidly.
1, a coating can get a thicker coating, such as coating 100 ~ 300 micron coating, with ordinary solvent coating, about 4 ~ 6 times, and with powder coating can reach the thickness. The coating has good corrosion resistance.
2, powder coating does not contain solvent, no three waste pollution, improve labor health conditions.
3. Adopt new processes such as powder electrostatic spraying, with high efficiency and suitable for automatic assembly line coating; Powder utilization rate is high, can be recycled.
4, in addition to thermosetting epoxy, polyester, acrylic acid, there are a large number of thermoplastic grease resistant powder coatings, such as polyethylene, polypropylene, polystyrene, fluorinated polyether, nylon, polycarbonate and all kinds of fluorinated resins.
Powder coating began to be used for protection and electrical edge. With the development of science and technology, it has been widely used in automobile industry, electrical insulation, corrosion resistant chemical pump, valve, cylinder, pipe, outdoor steel components, steel furniture, casting and other surface coating.
Characteristics of the equipment
1,Design according to the proportion of human engineering, easy operation, modern appearance.
2,Argon Arc full Welding of all stainless Steel in Inner to prevent dust from the machine itself.
3,Unique air-duct design to ensure the temperature inside is uniformity
4,First-class technology of heat &thermal insulation, sealing effect is excellent.
5,Double over-temperature protection, safer and more reliable.
6,Heating up fast, and the temperature is stable and accurate.
7,The shell temperature is low, which has little effect on the indoor environment temperature.
8,According to the product set up a variety of heating and air mode, energy saving, safety and environmental protection.
9,Module design:Each section manipulation and operation in flexible independently can be available.
10,Colors can be customized base on color card.
| Technical Parameters of Industrial Oven | |||||
| Type | Common | Clean | Finishing Cure | Explosion-Proof | Vacuum |
| Temperature range | 0-250ºC | 0-350ºC | 0-550ºC | 0-700ºC | 700ºC |
| Temperature Homogeneity | ±1ºC | ±3ºC | ±5ºC | ±1.5%ºC | |
| Heating Rate | <=5ºC/min | <=8ºC/min | <=10ºC/min | 10ºC/min | |
| Energy Type | electrical | Gas | Steam | Air Energy | Other |
| Heating Mode | Electric | Infrared | Other | ||
| Chamber | Single | Twin | Three | Other | |
| Sheathing Material | Cold Drawing Spray-Paint | Stainless S teel | Other | ||
| Chamber Material | Stainless S teel 201 | Stainless S teel 304 | Galvanized Sheet | Other | |
| Heat Insulating Material | Aluminosilicate Rock Wool | Insulating Fibre-Board | Firebrick | Other | |
| Air Transport Mode | Left and Right | Up and Down | Front and Behind | Symmetrical Left and Right | |
| Air Motor Position | Top | bottom | Hindside | Sidepiece | Other |
| Number of Explosion-proof Doors | One | Two | Other | ||
| Manual door | Single Door | Double Door | Three Doors | Other | |
| Automatic Door | Revolution door | Side Sliding Door | Lift door | Roll-Up Door | Other |
| Cart Type | Double-Deck Cart | Motor-Trolley | Landing Cart | Automatic Trolley | Other |
| Power Control | SSR | SCR | Other | ||
| Control Mode | Instrument Control | HMI Control | Network Control | Other | |
| Timing Mode | Manual | Automatic | Other | ||
| Safety Protection Function | Overtemperature | Overload | Phase Sequence | Earth Leakage Protection | Other |
| Detection Function | Temperature | Thickness | Flame | Pressure | Other |
 |  |  |  |
| Single-sided supply air type | Double-face type | Double-face blast with explosion-proof | Thermal rising type |
 |  |  | |
| Thermal rising type | Thermal radiation type | Hot air radiation | Hot air radiation |
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......