Hydraulic Oil Filter Housing Rfa-630*30fy
China Hydraulic Oil Filter Housing Rfa-630*30fy, Find details about China Oil Filter Housing, Hydraulic Filter Housing from Hydraulic Oil Filter Housing Rfa-630*30fy
Basic Info.
Model NO.
RFA-630*30FY
Trademark
Lefilter
Specification
63L/min
Origin
China
HS Code
8421219990
Model NO.
RFA-630*30FY
Trademark
Lefilter
Specification
63L/min
Origin
China
HS Code
8421219990
Product Desciption
The introduction of RFA series return filter
The RFA direct return oil filter is used for the oil return filter of the hydraulic system to filter out the metal particles generated by the wear of the components in the hydraulic system and the rubber impurities of the seals and other pollutants, so that the oil flowing back to the oil tank is kept clean. The filter is installed on the top of the fuel tank, the cylinder part is immersed in the fuel tank, and is equipped with bypass valve, diffuser, filter element pollution blocking signal device and other devices. It has compact structure, convenient installation, large oil flow capacity, small pressure loss, and replacement The filter element is convenient and other advantages.
Performance and characteristics
1. Convenient installation and connection, simplifying the system pipeline
The filter is directly installed on the oil tank cover, the filter head is exposed outside the oil tank, the oil return cylinder is immersed in the oil tank, and the oil inlet is equipped with pipe and flange connection, thus simplifying the system pipeline. The system layout is more compact, and the installation and connection are more convenient.
2. Set up filter element pollution indicator and oil circuit bypass valve to improve the reliability of the hydraulic system
When the filter element is blocked by contaminants or the system liquid temperature is too low, flow pulsation and other factors cause the inlet oil pressure to be 0.35Mpa, the signal device will issue a signal indication. The filter element should be replaced in time or the oil temperature should be increased. In this case, when the machine cannot be stopped immediately to deal with these faults, the bypass valve located at the lower part of the filter element will automatically open (the opening pressure of the bypass valve is 0.4Mpa) to protect the filter and the hydraulic system from working normally.
3. The design adopts direct return to filter the oil, which makes it very convenient to replace the filter element or add oil to the fuel tank
Just unscrew the filter cover (cleaning cover) to replace the filter element or add oil to the fuel tank, and there are 2 M18×1.5 oil ports on the filter head, which can be installed on either side of the transmitter or a small amount of oil flow in the system Used for filtering the oil return tank.
4. With liquid flow diffuser
The diffuser is set at the bottom of the oil return cylinder, which can make the oil return medium flow smoothly into the oil tank, and it is not easy to generate bubbles, thereby reducing the re-entry of air and reducing the turbulence of the deposited pollutants.
5. The filter element is made of glass fiber filter material has the advantages of high filtration accuracy, large oil flow capacity, small original pressure loss, and large dirt holding capacity.
Company shot:
FAQ:
1.Q: Are you a trading company or a manufacturer?
A: We are a professional manufacturer of all kinds of filter cartridges, housings and filtration systems. We provide you the total filtration solutions with our 13 years experience in the industry.
2.Q: May I have samples?
A: Sure, of course. Sample cost can be refunded if you place formal orders in the future.
3.Q: Can you make customized products?
A: Yes, of course if you can provide us detailed specifications or drawings. Our mission is make customer idea on the products and provide the customer satisfied solutions.
4.Q: Can I use our own designed package?
A: Yes, size, color, logo and packaging style all can be customized.
5.Q: What's your MOQ?
A: Normally, 100 PCS/item. Any trial order which is less than MOQ is warmly welcomed. If you have a trial order, please feel free to contact us so that we can make some shipping recommendation for you to save the cost based on the quantity you need.
6Q: I am a small business owner, Can I buy from you?
A: Yes, you are warmly welcomed. To grow with our customer is our goal. We would like to grow with you together.
7.Q: What is your general lead time?
A: Normally 5-7 working days for off-the-shelf samples and 20-25 days for bulk production.
8.Q: How should I pay you?
A: We strongly recommend T/T, L/C, Western Union, Paypal etc are acceptable.
The RFA direct return oil filter is used for the oil return filter of the hydraulic system to filter out the metal particles generated by the wear of the components in the hydraulic system and the rubber impurities of the seals and other pollutants, so that the oil flowing back to the oil tank is kept clean. The filter is installed on the top of the fuel tank, the cylinder part is immersed in the fuel tank, and is equipped with bypass valve, diffuser, filter element pollution blocking signal device and other devices. It has compact structure, convenient installation, large oil flow capacity, small pressure loss, and replacement The filter element is convenient and other advantages.
Performance and characteristics
1. Convenient installation and connection, simplifying the system pipeline
The filter is directly installed on the oil tank cover, the filter head is exposed outside the oil tank, the oil return cylinder is immersed in the oil tank, and the oil inlet is equipped with pipe and flange connection, thus simplifying the system pipeline. The system layout is more compact, and the installation and connection are more convenient.
2. Set up filter element pollution indicator and oil circuit bypass valve to improve the reliability of the hydraulic system
When the filter element is blocked by contaminants or the system liquid temperature is too low, flow pulsation and other factors cause the inlet oil pressure to be 0.35Mpa, the signal device will issue a signal indication. The filter element should be replaced in time or the oil temperature should be increased. In this case, when the machine cannot be stopped immediately to deal with these faults, the bypass valve located at the lower part of the filter element will automatically open (the opening pressure of the bypass valve is 0.4Mpa) to protect the filter and the hydraulic system from working normally.
3. The design adopts direct return to filter the oil, which makes it very convenient to replace the filter element or add oil to the fuel tank
Just unscrew the filter cover (cleaning cover) to replace the filter element or add oil to the fuel tank, and there are 2 M18×1.5 oil ports on the filter head, which can be installed on either side of the transmitter or a small amount of oil flow in the system Used for filtering the oil return tank.
4. With liquid flow diffuser
The diffuser is set at the bottom of the oil return cylinder, which can make the oil return medium flow smoothly into the oil tank, and it is not easy to generate bubbles, thereby reducing the re-entry of air and reducing the turbulence of the deposited pollutants.
5. The filter element is made of glass fiber filter material has the advantages of high filtration accuracy, large oil flow capacity, small original pressure loss, and large dirt holding capacity.
Company shot:
FAQ:1.Q: Are you a trading company or a manufacturer?
A: We are a professional manufacturer of all kinds of filter cartridges, housings and filtration systems. We provide you the total filtration solutions with our 13 years experience in the industry.
2.Q: May I have samples?
A: Sure, of course. Sample cost can be refunded if you place formal orders in the future.
3.Q: Can you make customized products?
A: Yes, of course if you can provide us detailed specifications or drawings. Our mission is make customer idea on the products and provide the customer satisfied solutions.
4.Q: Can I use our own designed package?
A: Yes, size, color, logo and packaging style all can be customized.
5.Q: What's your MOQ?
A: Normally, 100 PCS/item. Any trial order which is less than MOQ is warmly welcomed. If you have a trial order, please feel free to contact us so that we can make some shipping recommendation for you to save the cost based on the quantity you need.
6Q: I am a small business owner, Can I buy from you?
A: Yes, you are warmly welcomed. To grow with our customer is our goal. We would like to grow with you together.
7.Q: What is your general lead time?
A: Normally 5-7 working days for off-the-shelf samples and 20-25 days for bulk production.
8.Q: How should I pay you?
A: We strongly recommend T/T, L/C, Western Union, Paypal etc are acceptable.
You Might Also Like
Triac 0-10V Dali Dimmable Recessed LED Downlight/ COB LED Ce......
GMP Factory Supply Food Grade Phycocyanin Spirulina Extract
Table Tennis Racket with Rubber + Bag Ping Pong Bat
3mh Cool Giant Fat Inflatable Cat Cartoon for Advertising
Mslfp14 17*17 Wired Box Size X-ray Digital Flat Panel Detect......
Portable Glass Shape Edge Polishing Machine
A4 A3 Paper Wrapping Machine
Stainless Steel Angle Tube Strainer
Sinchold 9220/20/45 Forged Steel Welded Crane Rail Clips
Warehouse Tent Made by Superb Tent
Thyristor Rectified CO2 MIG Mag Arc Welding Machine