Advantage:
There are a Centrifugal wheel intelligent deceleration device inside of the head of generator. It make the wind turbine will not overspeed running at large wind spped, the generator can output power normally within the range of rated rotate speed, also avoid wind turbine braking or stopping on the condition of large wind speed. The efficiency and safety of full system have been improved for much, and also can protect the controller and inverter, extend the working life of batteries.
Model | XDF2KW | Rotor diameter | 3.2m |
Blades quantity | 3 pcs | Blades material | FRP (Fiber reinforce plastic) |
Rated speed | 320r/min | Rated output power | 2KW |
Max output power | 3000W | Output voltage | DC48V 72V 96V /AC220V |
Start wind speed | 2.5m/s | Rated wind speed | 9m/s |
Working wind speed | 3-25m/s | Security wind speed | 40m/s |
Speed regulation | yaw& magnetic resistance | Charge control | AIC (automatic intelligent control) |
Wind turbine type | PMG (Permanent magnet generator) | Working temperature | from -40ºC to +60 ºC |
Annual average energy production | 5000kWh | Recommended accumulators | 12V200AH6PCS( 1200Ah ) |
Accumulators full charge time | about 8 hours | Tower type | pull wire tubular tower or cone tower(optinal) |
Tower height | 6m (optional) | Weight | 80kgs (without tower) |
CAN SUPPLY POWER FOR | Air-condition. Refrigerator water pump. electric cooker.TV.washer. Illumine. Fanner. Charge |
Package
NO | ITEM | UNIT | QUANTITY | DESCRIPTION |
1 | GENERATOR | PC | 1 | 72V |
2 | BLADE | SET | 1 | 1.6M |
3 | DOME | PC | 1 | Φ200 |
4 | PRESS BOARD | PC | 1 | Φ280 |
5 | TAIL POLE | PC | 1 | 2KW |
6 | TAIL VANE | PC |
7 | BLADES SCREW AND NUT | PC | 9 | M10*65 |
8 | DOME SCREW AND NUT | PC | 3 | M6*25 |
9 | TAIL POLE PIN | PC | 1 | M16*170 |
10 | TAIL VANE SCREW AND NUT | PC | 1 | M8*40 |
11 | CONTROLLER AND INVERTER | PC | 1 | 2kw 72v |
12 | TOWER | PC | 2 | Φ89*3M |
13 | GENERATOR AND TOWER SCREW AND NUT | PC | 8 | M16*40 |
14 | CABLE | METER | 10 | 3*2.5 |
15 | PULLING WIRE | METER | 20 | Φ6 |
16 | PULLING WIRE CLIP | PC | 6 | |
17 | WIRE GRIP | PC | 3 | |
18 | BASE PLATE | PC | 1 | |
19 | BASE SCREW PIN | PC | 2 | M16*40 |
20 | GROUND ANCHOR AND SCREW NUT | PC | 4 | M14*40 |
21 | GROUND HOOK | PC | 3 | Φ10*40 |