Eberry Gw9 -40.5 Gw9 40.5kv High Voltage Isolation Isolating Switch Disconnector Disconnecting Switch

China Eberry Gw9-40.5 Gw9 40.5kv High Voltage Isolation Isolating Switch Disconnector Disconnecting Switch, Find details about China Isolation Switch, 40.5kv from Eberry Gw9-40.5 Gw9 40.5kv High Voltage Isolation Isolating Switch Disconnector Disconnecting Switch

Model NO.
GW9
Poles Number
2
Type
Isolation Switch
Function
Conventional Circuit Breaker, Switch
Certification
ISO9001-2000
Rated Voltage
40.5kv
Rated Frequency
50/60Hz
Rated Current
630A-1250A
Trademark
Eberry
Transport Package
Plywood Box
Origin
Yueqing, Zhejiang
Model NO.
GW9
Poles Number
2
Type
Isolation Switch
Function
Conventional Circuit Breaker, Switch
Certification
ISO9001-2000
Rated Voltage
40.5kv
Rated Frequency
50/60Hz
Rated Current
630A-1250A
Trademark
Eberry
Transport Package
Plywood Box
Origin
Yueqing, Zhejiang
    
Eberry Gw9-40.5 Gw9 40.5kv High Voltage Isolation Isolating Switch Disconnector Disconnecting Switch
Eberry Gw9-40.5 Gw9 40.5kv High Voltage Isolation Isolating Switch Disconnector Disconnecting Switch
Eberry Gw9-40.5 Gw9 40.5kv High Voltage Isolation Isolating Switch Disconnector Disconnecting Switch
Eberry Gw9-40.5 Gw9 40.5kv High Voltage Isolation Isolating Switch Disconnector Disconnecting Switch

Service environment:

1) Altitude: ≤1000m;
2) Environment temperature:-30~+40ºC,Alpine region≤-40ºC;
3) Wind pressure:≤700Pa(Equivalent to wind speed of 34m/s); 4) Earthquake intensity:≤8 degrees;
5) No frequent and violent vibration site;
6) General installation sites should be free of gases, vapors, chemical deposits, salt sprays, dust and other explosive, aggressive substances that seriously affect the insulation and conductivity of isolated switches.Anti-fouling type is suitable for filthy areas, but should not cause fire and explosive substances.
 
Overview:
The GW9-40.5 outdoor isolation switch is a single-phase AC 50Hz high-voltage switching device.It is used in 35KV power systems for turning on or off the power supply in the case of voltage and no load.

This product is a single-break vertical open structure, unicorn isolation switch pillar insulator is installed on their respective base frame, mainly by the base, pillar insulator, leading electrical circuit part, self-locking device and so on.The gate-type structure is used to split the gate to cut off and close the line.Each phase knife switch consists of two conductive blades, the blade is equipped with compression springs on both sides, adjusting the height of the spring can obtain the contact pressure required to the knife switch.When the switch on and off,the operating mechanism part of the insulated hook rod is used, and the knife switch has its own locking device.

When the isolation switch is separated with an insulated hook rod operation, the insulation hook stick buckles the isolation switch lock hook, pulls the lock hook to the direction of the separation gate, unlocks the self-locking device and drives the connecting conductive plate rotation to achieve the split-gate action, when the lock is closed by the insulating hook rod against the isolation switch hook drives the shaft rotation, so that the connected conductive plate turns to the closed position, at this time the self-locking device locks the isolation switch in the closed position.

This type of isolation switch can be mounted on a strut, wall, ceiling, crossbar or metal frame, or can be mounted upright or obliquely, however the mounting position should be trending down when the tentacle is open.
 
Sr.
Content
Unit
Value
1
 Rated Voltage
KV
40.5
2
 Max. working voltage
KV
24
 
 
3
 
 
Rated insulation level
1 min frequency tolerance voltage
To the ground
KV
40  40  40
 (effective value) 
Break
KV
47  47  47
Lightning impulse withstand voltage
To the ground
KV
105  105  105
 (Peak)
Break
KV
120  120  120
4
 Rated frequency
HZ
50
5
 Rated current
A
200  400  630  800  1000  1250
6
 4s heat stabilized current (effective value)
KA
6.3  12.5  20  25  25  31.5
7
 Dynamic current(effective value)
KA
16  31.5  50  63  63  80
8
 Creep distance
MM
300  380