ISO 636-a-W 42 3 W3si1 Welding Wires

China ISO 636-a-W 42 3 W3si1 Welding Wires, Find details about China Welding Wire, Welding Rod from ISO 636-a-W 42 3 W3si1 Welding Wires

Model NO.
ISO 636-A-W 42 3 W3Si1
Trademark
TOKO
Specification
Diameter: 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.4mm, 1.6mm
Origin
China
HS Code
83112000
Model NO.
ISO 636-A-W 42 3 W3Si1
Trademark
TOKO
Specification
Diameter: 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.4mm, 1.6mm
Origin
China
HS Code
83112000

GB/T 8110 ER50-6

AWS A5.18 ER70S-6

BS EN 1668-W 42 3 W 3Si1

ISO 636-A-W 42 3 W3Si1

ISO 636-B-W 49 A 3 W6

Introduction:

It is welding of carbon steel. With good welding technical properties, stable welding arc, beautiful welding forming.

 

Usage:

It is used for single pass or multi pass welding for carbon steel and 500MPa low alloy steel  (such as bridge, vehicle, mechanical structure.)

 

Chemical Composition:

C

Mn

Si

S

P

Cu

Cr

Ni

Mo

V

Other

0.07

1.47

0.90

0.011

0.012

0.18

0.020

0.021

0.007

0.008

0.50

 

Mechanical Properties:

Tensile Strength Rm (MPa)

Yield Strength Rel (MPa)

Elongation A(%)

-30°C Impact Value Akv (J)

550

430

29

90

 

Notes

1.     Gas flow for shield gas is 9-14L/min while at current of 100-200A and 14-18L/min at 200-300A. Tungsten elongation is 3-5mm and arc length is 1-3mm; Wind speed1.0M/s; Argon protection is recommended on the back of the welding area.

2.     Welding linear power directly affects mechanical properties and crack resistance of welding metal during welding.

3.     Strictly remove grease, moisture and other impurity on welding body.

 ISO 636-a-W 42 3 W3si1 Welding Wires
ISO 636-a-W 42 3 W3si1 Welding Wires
ISO 636-a-W 42 3 W3si1 Welding Wires
ISO 636-a-W 42 3 W3si1 Welding Wires
ISO 636-a-W 42 3 W3si1 Welding Wires
ISO 636-a-W 42 3 W3si1 Welding Wires