Simulated Rubber Ozone Aging Test Chamber

China Simulated Rubber Ozone Aging Test Chamber, Find details about China Simulating Ozone Exposure Climate Chamber, Ozone Resistance Test Chamber from Simulated Rubber Ozone Aging Test Chamber

Model NO.
YOT-225
Temp. Resolation
0.01 Degree
Temp. Fluctuation
+/- 0.5 Degree
Temp. Uniformity
+/- 1.5 Degree
Ozone Concentration
0~1000pphm, Adjustable
Interior Chamber Material
SUS#304 Stainless Steel Plate
Exterior Chamber Materia
Cold Rolled Sheet+Powder Coating
Description
Ozone Aging Test Chamber
Ozone Control Accuracy
+/-10%
Power Supply
AC 220V; AC 380V
Ozone Generator
Silent Discharge Ozone Generator
Circulation System
Cooling Fan
Trademark
Yuanyao
Transport Package
Strong Wood Carton
Specification
SGS, TUV Certification
Origin
China
HS Code
8514109000
Model NO.
YOT-225
Temp. Resolation
0.01 Degree
Temp. Fluctuation
+/- 0.5 Degree
Temp. Uniformity
+/- 1.5 Degree
Ozone Concentration
0~1000pphm, Adjustable
Interior Chamber Material
SUS#304 Stainless Steel Plate
Exterior Chamber Materia
Cold Rolled Sheet+Powder Coating
Description
Ozone Aging Test Chamber
Ozone Control Accuracy
+/-10%
Power Supply
AC 220V; AC 380V
Ozone Generator
Silent Discharge Ozone Generator
Circulation System
Cooling Fan
Trademark
Yuanyao
Transport Package
Strong Wood Carton
Specification
SGS, TUV Certification
Origin
China
HS Code
8514109000
Simulated Rubber Ozone Aging Test Chamber

Introduction & Application

The ozone content in the atmosphere is rarely the main factor of rubber cracking, ozone aging test chamber simulation and strengthen the ozone in the atmosphere conditions, effects of ozone on the law of the rubber, rapid identification and evaluation of rubber anti-aging properties of ozone and antiozonants the method of protection efficacy of anti-aging and then take effective measures to improve the life of rubber products.




Features
1. External chamber:Arc design,nice shape,surface electrostatic spray.  

2. Inner chamber:SUS#304 stainless steel, anti-corrosion and water resistance.  

3. The door is in the front side, with a transparent window (220*320mm) for observation indoor specimen (lighting inside), which has the advantages of transparent ,heat insulation, explosion-proof and so on.  

4. Air duct of wind way is the same direction as the specimen growth.                               High tensile silicone seal used in between test door and body to ensure the test area closed. 

5. Cooling system: Installed at the bottom, Tecumseh compressor original France. 

6. High-quality fixed wheels in the bottom, easy to move.      

7. Heating system: completely independent,nickel chromium alloy electric heater. 

8. Heater control way :contact cycle pules width modulated,SSR(solid state relays) 

9. Output power calculus by microcomputer to control a smooth,reliable


Technical Parameters
ModelYOT-080YOT-150YOT-1000
Inside dimensions W*H*D (cm)40*50*4050*60*50100*100*100
Outside dimensions W*H*D (cm)90*140*95100*150*105150*190*155
Temperature rangeRT~80ºC
Temperature fluctuation±0.5ºC
Temperature uniformity±1.5ºC; Empty load, 30 mins after stanlization
Resolution0.01ºC
Ozone concentration0~1000PPHM, adjustable (Optional: 0~500ppm non-standard)
ozone control precision±10%
Ozone production modeOzonator
Sample frameStatic and Dynamic fixtures
Sample frame speed360° rotation (1 circle/minute
MaterialSUS#304 Stainless steel for inner chamber, cold rolled sheet + powder coating for external chamber
InsulationPU
Circulation systemCooling fan
Heating systemSUS# stainless steel high speed heater
Controlling systemDigital electrinic indicator + SSR+ PID
Refrigeration systemcompressor + Fin type evaporator + air/water cooling system
Ozone concentration analyzerImported ozone concentration analyzer
Ozone generatorSilent discharge ozone generator
Other components1. Muti-layer vacuum glass obvervation window
2. Controlling status indicator lamp 3. Chamber light
Safety protection device1. Over-heat protection 2. phase sequence protection 3. overload protection
Power supplyAC 1ψ220V; 3ψ380V 60/50Hz
Customization serviceNon-standard or special requirements are all welcome


Company Introduce
Simulated Rubber Ozone Aging Test Chamber
Simulated Rubber Ozone Aging Test Chamber
Simulated Rubber Ozone Aging Test Chamber


Product Package
Simulated Rubber Ozone Aging Test Chamber


Packaing Area
Simulated Rubber Ozone Aging Test Chamber


Customers Visit Us
Simulated Rubber Ozone Aging Test Chamber


Customers' Feedback
Simulated Rubber Ozone Aging Test Chamber

After-sales Service
Simulated Rubber Ozone Aging Test Chamber


Exhibition

Simulated Rubber Ozone Aging Test Chamber
Simulated Rubber Ozone Aging Test Chamber


Certification


Simulated Rubber Ozone Aging Test Chamber


Except Simulated Rubber Ozone Aging Test Chamber, Guangdong Yuanyao Test Equipment Co., Ltd also can supply:
Precision Oven Tester, Triple Type Temp. & Humi. Chamber, Temp. &Humi. Control Host, Air Thermal Shock Tester, Liquid Thermal Shock Tester, Salt Spray Tester, Walk-in environmental Test Room, Temp. Humi. &Vibration Conbined Test Chamber, Aging Oven Tester, Rain/Spray Test Chamber, Burn-in test equipment, Dust Tester, Steam Aging Tester, Vibration Tester, Tensile Tester, Drop Tester and so on.
Simulated Rubber Ozone Aging Test Chamber

If you are interested in our products, welcome to enquire and purchase!