Automatic Transfer Switch 3/4p Dual Power

China Automatic Transfer Switch 3/4p Dual Power, Find details about China ATS, Dual Power from Automatic Transfer Switch 3/4p Dual Power

Model NO.
SWQ1-YJ
Output type
Single
Current
10-1250A
Trademark
SINGI
Transport Package
Standard Singi Packaging
Specification
385*210*138
Origin
Cn
HS Code
85365000
Model NO.
SWQ1-YJ
Output type
Single
Current
10-1250A
Trademark
SINGI
Transport Package
Standard Singi Packaging
Specification
385*210*138
Origin
Cn
HS Code
85365000
Dual power automatic transfer switch

Overview
SWQ series itelligent dual power automatic transfer switch (hereinafter referred to as switch) is a kind of emergency power switch, the switch is composed of circuit breaker and line controller, it is the mostThe new control system is the core, and the long-erm continuous operationis stable and rllable. It is an ideal mechatronics new dual- power automatic transfer switch.The product meets the standard: GB/T14048.11 "Low-voltage switchgear and control equipment Part 6; Multi-function electrical appliances Part 1: Automatic transfer switchgear".

Scope of application
This switch is suitable for dual power supply switch with 50/60Hz and rated voltage below 1000V. It can realize automatic or manual switching between common power supply (N) and standby power supply (R). (the LordThe backup power supply can be the power grid, the starter generator set, the battery, etc,, and the main and standby power sources are customized by the user) to enable the dual power supply customers to achieve unattended operation. This switch is suitable for special grades specified by the state.Or primary load users, such as high-rise buildings, post and telecommunications, coal mine ships, industrial assembly lines, medical and health, military faclitles, alrports, fire protection, metallurgy, chemicals, textiles, petroleum, etc. An important place to allow power outages.

Working conditions

Altitude≤2000m;
Ambient temperature -5 C - 40 C; .
When the maximum temperature is 40C, the relative humidityis ≤50%;
When the minimum temperature is 20C, the relative humidity is≤90%;
The category is Class IV; the inclinationis not more than +23° ;
Pollution level: Level 3, where there is no direct rain or snow erosion.
Eight-hour work or uninterrupted work.
If the above conditions cannot be met, the manufacturer should consult with the manufacturer when ordering.
This switch should be used for offshore, petroleum and nuclear power plants should sign a separate technical agreement.

Structural features and functions

SWQ series switch switching dnive adopts single motor drive, which has simple structure, rliaible and stable switching, no noise and low impact force. The operator drives the motor to execute the switch only at the moment of conversion Through the current, the steady-state operation does not need to provide the working current, the energy saving is remarkable, no temperature rise heat, node welding and motor burning phenomenon; the switch has mechanical interlock protection to ensure the main and standby power supply is notlt will be connected at the same time to ensure that the common and standby power supplies work reliably and do not interfere with each other. The switch can be switched in accordance with the switch, and the handle can be manually switched
in an emergency. Switch has electrical or mechanical closing Indicatin, the A.T.S control power supply is led to the independent standby power supply AC 220V (no additional control current is required).

The intelligent controller also provides varlous functions such as voltage loss, phase fllure control, undervoltage, delay control,generator control, fire reset, feedback signal, et., and has strong anti-interference ability. There are three working modes: self-retuming and mutual standby; with power supply, backup power supply, and standby power supply; common power supply and backup power are divided into three stable working states.

Easy to install, the control loop is connected by a plug-in terminal.

Manual conversion can be performed manually in the manual state with a dedicated handle.
Automatic Transfer Switch 3/4p Dual Power
Automatic Transfer Switch 3/4p Dual Power