China 400A 1000A Clamps Current Sensor Digital Current Transformer, Find details about China Ring Core Current Transformer, Ferrite Core SMPS Transformer from 400A 1000A Clamps Current Sensor Digital Current Transformer
The split core design permits non-contact current measurements through magnetic field induction without requiring that the primary wire be taken offline and disconnected for CT installation.This method permits a safer,easy and portable current measurement. An internal precision burden resistor across the secondary winding of the CT provides a safe low voltage output and permits safe opening of the secondary.
400A 1000A Clamps Current Sensor Digital Current Transformert
Parameters Table:
Current probe(specifications) | |
Rated Primary current | 0.1A-1000A |
Output signal | mA/A or mV/A |
Maximum Non-Destructive Current | 2000A |
Basic Accuracy | 1% |
Safety | CAT III 600V |
Dielectric Resistance | 1000MOhms @ 500 Vdc |
Case Material | Polypropylene resinUL flame retardant rating 94-V0 |
Voltage rank | 600Vac(isolated condition), 30Vac(bareness condition) |
Maximum voltage | 600Vac |
Useable frequency | 10Hz - 100kHz |
Maximum Cable Diameter | 2.05 inches (52 mm) |
Dimensions | 4.37x8.5 x1.77 in. (111x216x45 mm) |
Operating Temperature | -10ºC to +50ºC |
Standard | IEC 60044-1 |
Accessories | Supplied with feet for base mounting if required |
Certification | RoHS compliant CE&ETL approved |
Application
1) Current measurement, monitoring and protection for electrical wiring and equipment.
2) Current and power measurement for electric motors, lighting, air compressor, heating
and ventilation system, air-condition equipment and automation - control system.
3) Current, power and energy monitoring device.
4) Relay protection device.
Packaging & Shipping
Our Services