Gweike Chuck Laser for Laser Cutting Machine

China Gweike Chuck Laser for Laser Cutting Machine, Find details about China Rotary Chuck, Rotary Tool Chuck from Gweike Chuck Laser for Laser Cutting Machine

Model NO.
G400DB-175
Trademark
JINXIANG
Origin
China
Model NO.
G400DB-175
Trademark
JINXIANG
Origin
China

Product introduction:

This product is specially designed for laser tube cutting equipment. The product itself can be used as an independent rotating spindle, with a chuck that can firmly clamp the workpiece and rotate at the same time. Two built-in independent cylinders, check valve, reverse check valve, with a long-time pressure protection function (more than 8 hours), achieving fast clamping and release action by rotating the side air intake. , Disconnect the air source before working. After the product base is fixed, it only needs to be equipped with a matching motor and gear connection, and at the same time connected to a compressed air source (0.4-0.9Mpa), it can clamp the workpiece and drive the workpiece to rotate. Mainly used for clamp workpiece and rotation.

 

 

The chuck works at full stroke without additional adjustment of the position of the four claws, and can clamp a full range of applicable pipe fittings, improving production efficiency. The chuck adopts a fully closed structure, which has better stability and wear resistance. Built-in cross roller bearings, long service life, higher slewing accuracy and repeat positioning accuracy than traditional laser chucks, and relatively large clamping force compared with similar products in the market, so as to meet the processing of thin-walled pipe fittings.

 

The product is a four-claw double power automatic pairwise centering structure, which can clip circular, square, rectangular, workpiece, etc.

The product center is hollow structure, in order to keep  clean sanitation of the environment, dust removal device can be installed on the back. So this series  recommended for use on the pipe cutting machine.

This product is widely used in special laser tube cutting machines and other pipe processing machine tool systems.

 

Application:

Laser special tube cutting machine full stroke main chuck is suitable for laser tube cutting equipment, rotary cutting round tube, square tube, oval tube, etc.

The company's developed chucks and fixtures are widely used in aerospace, textile machinery, medical equipment, fitness equipment, auto and motorcycle accessories, laser cutting, petrochemical machinery, agricultural machinery, and other civilian machinery.


Gweike Chuck Laser for Laser Cutting MachineGweike Chuck Laser for Laser Cutting Machine
Gweike Chuck Laser for Laser Cutting Machine
 

Company Profile

 

Gweike Chuck Laser for Laser Cutting Machine

Certifications

Gweike Chuck Laser for Laser Cutting Machine

Gweike Chuck Laser for Laser Cutting MachineGweike Chuck Laser for Laser Cutting Machine

Installation Instructions

The initial installation is not included with the professional member. All installation with our team must be scheduled at least 4 weeks in advance before actual trip taken. All necessary connectivity must be ready prior the service being scheduled.

While our professional member arrives at the site for a completed and final installation, two days training course will be provide to the customer for operation and maintenance procedure. The initial installation is provided within 5 working days . The actual installation days many vary, based on different machine mode and packing lines. Each day of working hour consist at 8 working hours. Any additional day will be charge according to our service fee listed below.

When initial installation is being called for our professional member required, the surcharge will be made advance by the purchase at US$100/person/day plus all travel expenses. Travel expenses include documentation fees visa charge); local and destination transportation charges air, train, ferry, bus, taxi or any means of transportation required to arrive to/from destination); accommodation (minimum of 3 star hotel facility) and 3 daily hot meals.

After Sales Service

All parts are under one Year Warranty with defects from manufacturer. Any other defect caused by human error, mishandling, wear-and tear & any foreseeable conditions will not be covered by this warranty. All electronic parts and component can be guaranteed by original part's manufacturer or our company.

Payment

30% of the total contract amount is to be T/T into assigned account at the period of 5 working days after the Purchase contract is signed.
70% of the balance must to be made via T/T of the remainder balance amount of the purchase contract before the ordered equipment is to be delivered 10 working days prior of the shipment.
We also accept L/C payment, 30% down payment, and 70% L/C at sight

FAQ

Q1. Is Jinxiang Machinery a Manufacturer?
A1: Yes, We own 2 manufacturing bases and sales center in Jinan.

Q2: If we don't find what we need from your website , What should we do ? Do you make extrusion lines as per customers' specific requirement? t find what we need from your website , What should we do ? Do you make extrusion lines as per customers' specific requirement?
't find what we need from your website , What should we do ? Do you make extrusion lines as per customers' specific requirement? t find what we need from your website , What should we do ? Do you make extrusion lines as per customers' specific requirement?

A2: Yes, we can provide bespoke service to customers with specific requirements. You can send the detailed
requirements by email. We will check if we can develop them. We develop new machinery every month, and some of them may not yet be updated on our website.

Q3: How do you ensure your machinery and service quality?
A3: Our machines taking the European standards and follow the Germany type of business, we cooperation with International famous brands Siemens Schneider Flender Omron ABB WEG Falk Fuji etc. Our company continuously
imports over 1000 international first-class high precision processing equipment such as multistage machining centers,
CNC lathes and CNC milling machines from Korea, Japan etc. All our processes strictly adhere to CE certification,
IS09001 management system . And we have 12 months quality warranty time. We testing the machine performances before each delivery. Jinxiang service engineers will always be here for anything you needed.

Q4: How can I order and make payments?
A4: Once clear your requirements and determined extrusion line is ideal for you. We will send technical solutions and Proforma Invoice to you. You can pay via TT bank transfer, LC as you like.


Q5: How long is the delivery date?
A5: Usually it takes about 1 - 6 months depends on different machinery upon receipt of order advance payment.

Q6: What is your Minimum Order Quantity?
A6: One. We provide both customized extrusion lines and technical solutions. Welcome contact with us for technical innovation or improvements for your future purchasing plan.

Q7: What is your production capacity?
A7: We produce more than 500 advanced extrusion lines every year world wide.

A8: What about shipping?
Q8: We can send the small spare parts by air express for urgent matter. And the complete production line by sea
to save the cost. You can either use your own assigned shipping agent or our cooperative forwarder. The nearest port is QINDAO port, which is convenient for maritime transportation.

Q9: Is there any pre-after sale service?
A9: Yes, we support our business partners by pre-after sale service. JINXIANG has more than 300 technical testing engineers traveling world wide. Any cases would be responded with prompt solutions. We provide training, testing, operation and maintenance service for a life time.