Car Paint Booth /Car Spray Booth /Spray Booths for Auto/Car Spray Painting

China Car Paint Booth/Car Spray Booth/Spray Booths for Auto/Car Spray Painting, Find details about China Car Paint Booth, Car Spray Booth from Car Paint Booth/Car Spray Booth/Spray Booths for Auto/Car Spray Painting

Basic Info.

Model NO.

IT-SUPER 701

Coating

Powder Coating

Airflow Direction

Fully Undershot-type

Heating Mode

Direct-Fired Gas Heating

Paint Mist Treatment

Dry-type

Condition

New

Walls

50mm Rock Wool Panel

Plenum Height

600mm

Basement

350mm High

Lighting

LED Lamp

Brightness

> 1,000lux

Filter

High Efficiency Filters

Fan

Direct Drive Fan, 11kw Motor

Air Volume

35,000m3/H

Empty Loaded Air Speed

+/- 0.35m/S

Controls

CE Standard Control Box

Noise

<78dB

Trademark

INFITECH

Transport Package

Polyfoam and Metal Frame

Specification

7000X4000X2800MM

Origin

Guangzhou, China

HS Code

8419899090

Model NO.

IT-SUPER 701

Coating

Powder Coating

Airflow Direction

Fully Undershot-type

Heating Mode

Direct-Fired Gas Heating

Paint Mist Treatment

Dry-type

Condition

New

Walls

50mm Rock Wool Panel

Plenum Height

600mm

Basement

350mm High

Lighting

LED Lamp

Brightness

> 1,000lux

Filter

High Efficiency Filters

Fan

Direct Drive Fan, 11kw Motor

Air Volume

35,000m3/H

Empty Loaded Air Speed

+/- 0.35m/S

Controls

CE Standard Control Box

Noise

<78dB

Trademark

INFITECH

Transport Package

Polyfoam and Metal Frame

Specification

7000X4000X2800MM

Origin

Guangzhou, China

HS Code

8419899090

Product Desciption

European Standard One-stop Auto Refinish Car Prep Bay & Painting Baking Booth For Vehicles

Car Paint Booth/Car Spray Booth/Spray Booths for Auto/Car Spray Painting

Car Paint Booth/Car Spray Booth/Spray Booths for Auto/Car Spray Painting

1) Product overview

Products: 2 Preparation bays (6.5x4x2.8m) & Paint baking booth (7x4x2.8m)

INFITECH Rear Wall Extraction Preparation Bay is a cost efficient area suitable for sanding preparation and preparing cars and/or parts for the spraying phase to follow. This particular design does not need a concrete pit. It has a ceiling with lights and the airflow is horizontal across the vehicle. The exhaust is through low level exhaust filters.

INFITECH Full Down Draft Spray Booth have inlet plenums across the roof to offer evenly disperse air movement with minimal turbulence in a vertical direction. This reduces the chance of overspray being drawn through the spray booth and settling on the substrate closer to the filters. The working area of the Spray Booth has a grated floor in which the air and overspray is drawn and filtered prior to exhausting from the spray booth.

2) Key features

Direct-fired gas heating system

3) Technical parameters

Item 1: Rear Wall Extraction Preparation Bay
Design standard	BS EN 13355: 2004 + A1: 2009 BS EN 60204: 2006 + A1: 2009
Internal dimensions	6500×4000×2800mm (L×W×H)
External dimensions	8460×4000×3460mm (L×W×H)
PVC soft curtain	6700×2700mm
Ceiling lighting	8 sets, each 4×18W, 576W total
Brightness	> 800Lux
Exhaust system	1×5.5KW, 970RPM, 380V, 50HZ, SIEMENS motor
Air volume	18,000m³/h, 650pa
Filters	Floor filter: pleated andreae filter + fiberglass filter Exhaust filter: fiberglass filter
Controls	Fan start, emergency stop switch, lighting, failure indication
Electrical & Tool cabinets	Yes.
Special item	Rated power: 8KW

Item 2: Spray Booth with direct-fired heating system
Design standard	BS EN 13355: 2004 + A1: 2009 BS EN 60204: 2006 + A1: 2009
Airflow	Full downdraft for spray and cure
Internal dimensions	7000 X 4000 X 2800mm (L X W X H)
External dimensions	7110 X 5760 X 3460mm (L X W X H)
Plenum height	600mm
Entrance door	1 set, 3200 X 2700mm (W X H), manual door
Divider door	1 set, 6000 X 2400mm(B X H), electric door
Personnel door	1 set, 800 X 2000mm (W X H)
Ceiling lighting	10 sets, each 4 X 18W, 720W total
Sidewall lighting	4 sets, each 2 X 18W, 144W total
Brightness	> 1,000Lux
Filters	Pre-filter, ceiling filter, floor filter, exhaust filter
Intake system	11KW, 970rpm, 380V, 50Hz, SIEMENS motor
Exhaust system	11KW, 970rpm, 380V, 50Hz, SIEMENS motor
Air volume	35,000m³/h
Equipment empty loaded air speed	+/- 0.35m/s
Noise	<78db
Heats	Direct fired heating system
Maximum working temperature	80°C
Controls	Inverter control, PLC, CE standard control box
Special item	Rated power: 25KW

Features

Airflow • Full downdraft airflow for spray and cure • Controlled airflow ceiling	Construction • White pre-coated galvanized steel • Dual-skin insulated panels filled with rock wool, 50mm thick • 600mm high plenum
Doors • Manual door, 3 wing entry door (2 + 1 structure) • Personnel door with observation window	Air handling unit • Intake and exhaust motors, 11kw, SIEMENS motor • Direct fired heating system
Filtration • Pre-filter: G3 grade pre-filter bag filter • Ceiling filter: F5 grade filter cotton, Model SP-600G • Floor filter: G2 grade fiberglass paint arrestor filters • Exhaust filter: Simple activated carbon filter mat, M type	Controls • Inverter soft start •PLC control •Painting, heating painting, flash-off, baking, lighting, emergency stop switch, failure indication, cooling, motor overload and over-current protection, fan and heating system interlock control, over-temperature alarm indication
Special item - divider door between spray booth and preparation bay Electric plate roll-up door Door filled with polyurethane foam, with reinforced ribs; With observation window; Anti-crash protection device; Anti-sagging device.

4) Packaging and loading

5) Engineering cases

6) Company information

Guangzhou Infitech is professional manufacturer of customized European standard spray booths in China. We stick to European standard for spray booth since the business started. What we supply ranges from initial design and layout, technical consultation, manufacturing through to installation and maintenance. We pride ourselves in delivering customized products that suit your customers' individual needs.

7) INFITECH at trade show