Far 25.853 Part IV Osu Aerospace Parts Heat Release Rate Testing Machine
China Far 25.853 Part IV Osu Aerospace Parts Heat Release Rate Testing Machine, Find details about China Heat Release Rate Apparatus, Heat Release Rate Tester from Far 25.853 Part IV Osu Aerospace Parts Heat Release Rate Testing Machine
Basic Info.
Model NO.
OSU-M
Heat Radiation Flux
35kw/M2
Application
Aviation Parts
Temperature Controller
2 PCS
Color
White
Delivery Time
2 or 3 Months
Combustion Gas
Methane
Trademark
AI
Transport Package
Plywood Case
Specification
Stainless steel
Origin
China
HS Code
9031809090
Model NO.
OSU-M
Heat Radiation Flux
35kw/M2
Application
Aviation Parts
Temperature Controller
2 PCS
Color
White
Delivery Time
2 or 3 Months
Combustion Gas
Methane
Trademark
AI
Transport Package
Plywood Case
Specification
Stainless steel
Origin
China
HS Code
9031809090
Product Desciption
Products:
The OSU heat release rate tester was approved by FAA of the Federal Aviation Administration of the United States was originally designed by Smith of Ohio State University in 1972, and later became a FAA designated combustion test instrument for testing the heat release rate of Aeronautical materials.
Standard:
• FAR 25.853 Part IV:Heat release rates by materials and products when exposed to one level of radiant heat Airbus AITM 2.0006,
• Boeing BSS 7322,
Main features:
1. The OSU heat release rate tester adopts stainless steel combustion test chamber with high temperature glass observation window;
2. The heat radiation source is 4 Glowbars heating rods, which can provide 35KW/M2 heat radiation flux.
3. Two independent PID temperature controllers are used for heating temperature control.
4. The OSU heat release rate tester is equipped with fully automatic pneumatic sample propulsion device and shielding door device;
5. It has upper burner and movable lower burner;
6. Rotor flowmeter can be used to adjust the gas flow rate of upper and lower burners.
7. The OSU heat release rate tester is equipped with movable T-type calibration burner device and flow controller;
8. Mass flow controller is applied to thermopile temperature calibration automatically.
9. Water-cooled heat flow meter is equipped with cooling mode to measure the heat radiation flux of the fire surface.
10. The air temperature control device can provide constant temperature and flow air for the test chamber.
11. The orifice flowmeter is used to measure the flow pressure entering the test bin.
12. The OSU heat release rate tester is equipped with data acquisition system and heat release standard test software.
Specification:
Factory overview
Customer Feedback
Germany
USA
The OSU heat release rate tester was approved by FAA of the Federal Aviation Administration of the United States was originally designed by Smith of Ohio State University in 1972, and later became a FAA designated combustion test instrument for testing the heat release rate of Aeronautical materials.
Standard:
• FAR 25.853 Part IV:Heat release rates by materials and products when exposed to one level of radiant heat Airbus AITM 2.0006,
• Boeing BSS 7322,
• ASTM E906:Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method SUPERSEDED
Main features:
1. The OSU heat release rate tester adopts stainless steel combustion test chamber with high temperature glass observation window;
2. The heat radiation source is 4 Glowbars heating rods, which can provide 35KW/M2 heat radiation flux.
3. Two independent PID temperature controllers are used for heating temperature control.
4. The OSU heat release rate tester is equipped with fully automatic pneumatic sample propulsion device and shielding door device;
5. It has upper burner and movable lower burner;
6. Rotor flowmeter can be used to adjust the gas flow rate of upper and lower burners.
7. The OSU heat release rate tester is equipped with movable T-type calibration burner device and flow controller;
8. Mass flow controller is applied to thermopile temperature calibration automatically.
9. Water-cooled heat flow meter is equipped with cooling mode to measure the heat radiation flux of the fire surface.
10. The air temperature control device can provide constant temperature and flow air for the test chamber.
11. The orifice flowmeter is used to measure the flow pressure entering the test bin.
12. The OSU heat release rate tester is equipped with data acquisition system and heat release standard test software.
Specification:
| Size | 760mm (W) x 1850mm x (H) x 850mm (D) |
| Weight | 218KG |
| Electricity requirements | 220 V, 35 Amps |
| Ambient temperature | 10 ºC to 35 ºC |
| Auxiliary Gas | Constant Temperature and Constant Current Gas |
| Combustion gas | Methane |
| Standard | ASTM E906,BSS 7322,FAR PART 25 APPENDIX F Part IV |
| Applications | Aviation Materials |
Factory overview
Customer Feedback
Germany
USA
You Might Also Like
Triac 0-10V Dali Dimmable Recessed LED Downlight/ COB LED Ce......
GMP Factory Supply Food Grade Phycocyanin Spirulina Extract
Table Tennis Racket with Rubber + Bag Ping Pong Bat
3mh Cool Giant Fat Inflatable Cat Cartoon for Advertising
Mslfp14 17*17 Wired Box Size X-ray Digital Flat Panel Detect......
Portable Glass Shape Edge Polishing Machine
A4 A3 Paper Wrapping Machine
Stainless Steel Angle Tube Strainer
Sinchold 9220/20/45 Forged Steel Welded Crane Rail Clips
Warehouse Tent Made by Superb Tent
Thyristor Rectified CO2 MIG Mag Arc Welding Machine