Metal Mine Hydrocyclone widely applied in mine-chosen technique in various metal mines.
It mainly shows in the following works:
1. Classification for section I closed circuit grinding
2. Classification for section II closed circuit grinding
3. Regrinding for fine mine classification
4. Mud-removing before selection and after selection
5. Dam and backfill for gangue

In closed circuit grinding system, it features high classification efficiency and fine overfall fineness under high mine concentration. Classification efficiency is higher for 5-10% than common screw grader. It benefits for enhancing grader utilizing coefficient. Choose proper specification and mode of cyclone according to grinding processing capacity, overfall fineness and sedimentation concentration. This is precondition of getting the most optimized work condition.

Our company is able to offer stand-alone, parallel connection machine or machine series in such specs as Φ 50, Φ 75, Φ 100, Φ 125, Φ 150, Φ 200, Φ 250, Φ 300, Φ 350, Φ 500 and Φ 660. Fine sand, less than 37μ M, in gangue can not be used as dam materials during selecting mine. After the classification by cyclone, coarse granule left in the bottom of dam, fine granule move to the tail of gangue. Fine granule graded naturally during the movement. There is section full of clean water, which can be used for calling back of water. In the process of filling tail, we utilize cyclone for grading and concentrating to separate coarse granule so that to reduce load of filtering machine and to reach at the best effect. Use cyclone to finish dam and filling work so that to solve problems such as leaking mine, sink and overproof water discharged. So it can receive obvious economic and social benefit.

Note: Design and manufacture according to customers' requirements. Adopt PU, steel hull lining PU, steel hull lining TG-NM wearable material, steel hull lining high Aluminum porcelain in cyclone.

Q: What Information should customers give to us in order to let we provide you with efficient & suitable quotation and assistance.
A:1. What type is the mining? Is it rock stone? or it is sand?
2. If rock stone,What is the general particle size(mm) of the raw ore?
3. What is the handling capacity(tons per hour) you plan to work with?
4.What is the elements of the raw ore? How much percent % of each minerals?
Q: Can we send the mineral samples to your company, let your company run the ore-dressing experiments test for us?
A: Yes, we can run the ore-dressing experiments for our customers. After the test, we will based on the results to give you the reasonable flowchart, suitable solution and equipments selection. etc.
Q: How long is the warrenty of your equipments? Does your company supply the spare parts?
A: The warranty period of Hengcheng equipments is one year. And of course we will supply the spare parts for you for life-long time at lowest cost.
Q: If i need the complete mineral processing line. is Hengcheng able to help us build it?
A: Yes, we can help you combine a complete mineral processing line. and give you related professional advices as long as you need.
There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service.

Warmly welcome you come to visit our factory.
Our factory located at Ganzhou city, Jiangxi province, China.
Take flight from your country to Guangzhou airport in China, and then take flight from Guangzhou-- to Gan zhou airport, then we will send the car to pick up you from Ganzhou airport.

Jiangxi Hengcheng Mining Equipment Co,.Ltd
 is always going for the best quality and perfect service for customers 
and it has already won lots of praises at home and abroad.
Pre Sales Service
Be a good consultant and assistant to customers, to ensure our customer's investment rewarded
with great profit.
1.Enough details about the ores or slags shall be learned, sometimes a test is needed for some ores.
2. Equipment of right model is selected for customers.
3. Customized products and processing flow sheet can be designed and developed to meet 
customer's special needs,  
4. Engineer could be sent to observe customer's working site to come up with an optimized solution accordingly.
On-Sales Service
Every customer is respected and convenience and reliability will be provided. We are devoted to
helping you to benefit as much as possible.
1. Inspection is a must before delivering of the goods.
2. Assistance to make a construction plan by supplying all drawings and data needed.
3. Most favorable scheme for you with the guaranteed quality.
4. Timely communication to make sure improvement of project and your requirement met.
After-Sales Service
1. Installation, adjustment, and testing of equipment is available.
2. Train of technicians and workers at site is promised.
3. Service engineers will not leave until ensuring the whole line running well after the installation & adjustment is finished.
4.If any failure or question about the machines or the processing line,contact us and we are available at any time.