Products

Ql50 Down The Hole DTH Rock Drill Bit

China Ql50 Down The Hole DTH Rock Drill Bit, Find details about China DTH Bit-Ql50-152, DTH (down the hole) Drill Bits from Ql50 Down The Hole DTH Rock Drill Bit

Model NO.
ROS54
Name
Down-The-Hole Drill Bit
Bits
DTH Hammer Bits
Drill Bits
Down The Hole Drill Bits
Drilling Bits
Down Hole Hammer Drilling Bits
DTH
Down The Hole Hammers
Drilling
Down The Hole Hammer Drilling
Item
Rev Drill Down Hole Hammer
Sale
Down Hole Hammer for Sale
Use
Down The Hole Drilling Method
China
China Down Hole Hammer and Bits
Trademark
ROSCHEN
Transport Package
Wooden Box
Specification
46cm
Origin
China
HS Code
84314320
Model NO.
ROS54
Name
Down-The-Hole Drill Bit
Bits
DTH Hammer Bits
Drill Bits
Down The Hole Drill Bits
Drilling Bits
Down Hole Hammer Drilling Bits
DTH
Down The Hole Hammers
Drilling
Down The Hole Hammer Drilling
Item
Rev Drill Down Hole Hammer
Sale
Down Hole Hammer for Sale
Use
Down The Hole Drilling Method
China
China Down Hole Hammer and Bits
Trademark
ROSCHEN
Transport Package
Wooden Box
Specification
46cm
Origin
China
HS Code
84314320

DTH drill bit

Now the high pressure DTH drill bit is currently used in the face design. There are four main types: end surface convex surface, end surface planar surface, end surface concave surface and end surface deep concave center type. Carbide more choice of ball teeth, spring teeth or ball teeth and spring teeth shared tooth mode.       

Roschen has a comprehensive range of DTH drill bits to match all conceivable applications. Each bit is made from quality alloy steel, and has been precision machined to produce a perfect body, heat treated to the required hardness, given surface compression for fatigue resistance, and fitted with precision buttons manufactured in-house. These are deigned for specific applications for all rock types, hardness's and condition. Bit life and rate of penetration are the most important criteria in selecting the right bit for a particular application.

Bit Face Shape Selection:

Drop Center:
For High penetration rates in soft to medium hard and fissured rock formations. Low to medium air pressure. Maximum hole deviation control. 

Concave Face:
The all round application bit face specifically for medium hard and homogenerous rock formations. Good hole deviation control and good flushing capacity.

Convex Face:
For high penetration rates in soft to medium hard with low to medium air pressures. It is the most resistance to steel wash, and may reduce the load and wear on the gauge buttons, but poor hole deviation control. 

Double Gauge Face:
This kind of face shape is suitable for fast penetration rates in medium to hard rock formations. Designed for high air pressures and good resistance to steel wash step gauge bit.

Flat Face:
This kind of face shape is suitable for hard to very hard and abrasive rock formations in applications with high air pressures. Good penetration rates an resistance to steel wash. 

Pineapple Face:
The Pineapple Bit can be dressed with ballistic buttons for use in soft to medium hard formations where fractured rock can be expected, or can be supplied with spherical buttons for hard and abrasive formations.

DTH drills are classified into high-pressure down-the-hole drills and low-pressure down-the-hole drills. At present, the polycrystalline diamond downhole drill bit is better, with high strength, high hardness, strong wear resistance, impact resistance and good self-sharpening, and its wear resistance is 5-20 times higher than that of cemented carbide. You can consider ROSCHEN Diamond DTH bit, improve work efficiency, reduce consumption, reduce the time to replace the drill and get lower drilling cost!



Product specifications:
 
For 5" hammer
DTH bits shank		Bit Dia.No. Air HolesGauge
Buttons		Front
Buttons		Weight
(Kg)		Part No.
mminch
DHD350R/COP541335 1/4"27×φ166×φ1415DHD350-133
1405 1/2"27×φ187×φ1416DHD350-140
1465 3/4"28×φ187×φ1417DHD350-146
1526"28×φ188×φ1417.5DHD350-152
1656 1/2"28×φ188×φ1618.5DHD350-165
SD51335 1/4"27×φ166×φ1415.5SD5-130
1405 1/2"27×φ187×φ1416SD5-140
1465 3/4"28×φ187×φ1416.5SD5-146
1526"28×φ188×φ1417SD5-152
1656 1/2"28×φ188×φ1619SD5-165
QL501335 1/4"27×φ166×φ1415.5QL50-130
1405 1/2"27×φ187×φ1416QL50-140
1465 3/4"28×φ187×φ1416.5QL50-146
1526"28×φ188×φ1417QL50-152
1656 1/2"28×φ188×φ1619QL50-165
Mission501335 1/4"27×φ166×φ1412.5M50-130
1405 1/2"27×φ187×φ1413.5M50-140
1465 3/4"28×φ187×φ1414M50-146
1526"28×φ188×φ1414.4M50-152
1656 1/2"28×φ188×φ1615M50-165


ROSCHEN hammer bit technical data:
 
ROSCHEN DTH Bits Specifications
Hammer  SizeBits diameterShankROSCHEN CODE
MetricInch
1"64mm-70mm2 1/2"-2 3/4"BR1ROS 11
2"70mm-95mm2 3/4"-3 3/4"MACH20/BR2ROS 22
3"90mm-102mm3 1/2"-4"COP32/COP34/MACH303ROS 32
M30/DHD3.5/BR3ROS 34
4"105mm-152mm4 1/8"-6"COP44/DHD340/MACH44ROS 42
SD4/M40/QL40ROS 44
5"133mm-165mm5 1/4"-6 1/2"COP54/DHD350R/MACH50ROS 52
SD5/M50/QL50/BR5ROS 54
6"152mm-254mm4 1/8"-10"COP64/DHD360/SD6ROS 62
M60/QL60/Bulroc BR6ROS 64
8"203mm-330mm8"-13"COP84/DHD380/SD8ROS 82
QL80/M80/M85ROS 84
10"254mm-380mm10"-15"SD10ROS 100
NUMA100
12"305mm-508mm12"-20"DHD1120/SD12ROS 120
NUMA120/NUMA125
Notes: 
Metzke, Remet thread is available!
Any special size of DTH bits will be available by requests.


Shank can be available:

1), Dia. 64mm-70mm shank Bulroc BR1
2), Dia. 70mm-95mm shank Halco MACH20, Bulroc BR2
3), Dia. 90mm-102mm shank COP32, COP34, Halco MACH303, M30, DHD3.5, Bulroc BR3
4), Dia. 105mm-152mm shank COP44, DHD340, Halco MACH44, SD4, M40, QL40, Bulroc BR4
5), Dia. 135mm-165mm shank COP54, DHD350R, COP54, Halco MACH50, SD5, M50, QL50, Bulroc BR5
6), Dia. 152mm-254mm shank COP64, DHD360, SD6, M60, QL60, Bulroc BR6
7), Dia. 203mm-330mm shank COP84, DHD380, SD8, QL80
8), Dia. 254mm-380mm shank SD10, Numa100
9), Dia. 305mm-508mm shank DHD1120, SD12, N120, N125
10), Dia. 405mm-864mm shank SD15, SD18
11), VKP80, VKP95, CIR90, CIR100, CIR110, CIR150, CIR200...

We can also provide related products DTH hammers, ODEX system, symmetrix systems, slide block drilling systems, etc and DTH drilling pipes for various thread API REG, API IF, BECO, etc


Product photos


Ql50 Down The Hole DTH Rock Drill Bit



Quality warranty:

Our products are made of high quality steel and all spares parts are inspected strictly before shipping. We have quickly responses for your complaint and suggestion.


Package:
Using ply-wooden cases and pallet for package to protect the products and avoid the damagement during transportation. Also we can customize package according to your special requests.

Production time:
Generally need 15-25 days

Transportation:
By air, By Express or By sea according to your requests.

Ql50 Down The Hole DTH Rock Drill Bit


Ql50 Down The Hole DTH Rock Drill Bit



FAQ 

Q: Are you a manufacturer or trading company ?
A: We are a specialized manufacturer.

Q: How about the delivery terms ?
1. Payment: T/T, L/C, Western Union, Paypal, 30% deposit in advance and rest before delivery.
2. Min. order quantity: 1 piece.
3. Transportation: By DHL/TNT/Fedex express, air, sea, train.

Q: How about discount ?
A: Price is based on products and order quantity.

Q: Do you accept sample order?
A: Yes sure, please contact us for details.

Q: How about your after-sales service?
A: As a manufacturer, we offer promt technology support for all problems and questions. Besides, we accept goods return or replace for quality problem.



For more information please contact:


 
ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED 
 
: +86-137 6419 5009 ; +86-135 8585 5390
 
 Website: http://roschen.en.made-in-china.com 

 ; http://roschen.en.made-in-china.com 

http://roschen.en.made-in-china.com 

 ; http://roschen.en.made-in-china.com 
 

You Might Also Like