EDM Die Sinking Machine(LV4)
Brief Introduction:
Creator Precision Co., LTD. was established in Taiwan at 1986.
In 1997 , Creator Industry (Suzhou) Co., Ltd. was found to extend Mainland China market. 1.The registered capital is USD 5,080, 000.
2.The new factory covers 24,680sqms and holds a building area of 19,000sqms.
3.There are 250 employers which assure
4.Annual production at least as 600 sets of EDM and 100 sets of VMC.
| Specification of power supply unit | unit | CR6C |
| Specification | A | 50 |
| Input voltage | 3φV | 220/346/380/415 |
| Processing voltage | V | 100 |
| High voltage | V | 140/250 |
| Min on time | uS | 1 |
| Min off time | uS | 1 |
| Max cutting speed | Mm³/min | 480 |
| Best surface finish | umRa | 0.1 |
| Min electrode wear rate | % | 0.2 |
| Weight | Kg | 210 |
| |
| Specification of machine unit | | |
| X axis table travel | Mm | 400 |
| Y axis table travel | Mm | 300 |
| Z axis quill travel | Mm | 300 |
| Worktable dimension | Mm | 650*320 |
| Distance fro.plate to table | Mm | 500/200 |
| Work tank inner dimension | Mm | 990*600*455 |
| Max capacity of dielectric fluid | Liter | 400 |
| Max electrode weight | Kg | 75 |
| Max work piece weight | Kg | 1000 |
| Machine dimensions | Mm | 1745*1955*2242 |
| Weight of machine unit | Kg | 2400 |
| | | |
(1)CERATOR controller:
CERATOR multi-axes CNC electric discharge systems adopt industrial-grade and low power consumption mother board.
VLSI large scale integrated circuit design has stable performance and durable life.
(2)Software operation function:
Support 40 orbital machining patterns, combined with both path sparking and orbital sparking modes.Various discharge mode, 1000 groups of processing program, 50 groups of coordinates, 50 groups of common depth gauge, 10 kinds of automatic seeks the heart / edge finding, Support reference ball operation, various processing parameters, and power-off coordinate memory.
(3)3D orbit function
Automatic center finding
(4)The new high speed flush mode
support the feed rate up to 5000mm/min. improve the deep hole machining efficiency.
And achieve stable spark without external flushing.
(5)A high rigidity cast body and innovative XY axis cross seat structure
effectively controls the balance of the XY axis . This allows for a more precise and more stable vibration reaming processing.
(6) The three axis precision ball screw with high precision pre-tension reduce overall back lash to ensure servo transmission precision. it can improve the performance and enhance processing precision.