Glasses Mold Melt Spray Mold N95 Bridge Mold

China Glasses Mold Melt Spray Mold N95 Bridge Mold, Find details about China Melt Spray Non-Woven Mold, Precision Mold from Glasses Mold Melt Spray Mold N95 Bridge Mold

Basic Info.

Model NO.

OEM customized

Design Software

Installation

Fixed

Standard

Deutsche Industrie Normen 1.2083

Customized

Certification

ISO 9001

Mould Life

700K Shots

Mold Material

S136h

Trademark

Huajin

Transport Package

Woodencase

Specification

length: 600mm

Origin

Changzhou, China

HS Code

847990909

Model NO.

OEM customized

Design Software

Installation

Fixed

Standard

Deutsche Industrie Normen 1.2083

Customized

Certification

ISO 9001

Mould Life

700K Shots

Mold Material

S136h

Trademark

Huajin

Transport Package

Woodencase

Specification

length: 600mm

Origin

Changzhou, China

HS Code

847990909

Product Desciption

The length of the spinneret of the melt-blown equipment ranges from 300mm, 450mm, 600mm, 80mm. 100mm, 120mm, 160mm The aperture size is usually 0.15mm ~ 0.3mm, and the spinneret must be polished before use
All of them are processed by 300-million-rpm high-speed machining center imported from Japan: Makino. The holes produced are not oblique holes, the hole walls are smooth, no polishing is required, and the verticality and straightness are very good. There will be no wire breakage, broken wire will cause a serious phenomenon of "feed point" floating wire, pressure resistance, corrosion resistance and sufficient mechanical strength.
• Strict size control
• Based on the company's powerful processing capabilities, according to the process requirements of the workpiece, mark the dimensional tolerances on each part drawing of the melt-blown cloth mold and conduct a full-scale inspection.
• Strict material selection
• According to the characteristics of the melt-blown cloth forming process combined with the performance of the steel material, a reasonable steel material processing method is used to ensure that the performance of the steel material is best exerted.

Glasses mold melt spray mold N95 bridge mold
Usage for products	PET, PBT, PA, PP, PE, PTFE, PS, EMA, EVA, TPU, a variety of materials such as carbon fiber
Product usage	Thermal insulation materials, filter materials, oil absorption material;
	Medical and health materials,environmental protection materials
	Clothing materials
	Lead-acid battery separator material, industrial and home cleaning
Characters	Conform to the material characteristics (viscosity, temperature, rate)of hangers type flow channel and special shaped structure design to raw material forming more smooth, no leakage, corner phenomenon; Implement material flow velocity and flow in the width direction is consistent, without pressure fluctuations, make sure the production goods size are the same.
Heat Voltage	220V or on customer's request
Heating way	Heating bars made of stainless steel from Italy
Die material	2738 from Germany or P20
Screws	High strength at 12.9 grade

Polishing	Lips and surface of flowing: 0.02-0.03(μm), Other surfaces: 0.03-0.04(μm).
Surface hardness:	60-70HR
Chrome thickness:	0.035-0.045mm
Feeding type	Round or square or special
Installation	On costumer's request