Addressable Ws2812b Apa102c Sk6812 Ws2811 Ws2801 LED Strip 2048 Pixels Programmable LED RGB Controller

China Addressable Ws2812b Apa102c Sk6812 Ws2811 Ws2801 LED Strip 2048 Pixels Programmable LED RGB Controller, Find details about China RGB Strip Controller, Programmable Controller from Addressable Ws2812b Apa102c Sk6812 Ws2811 Ws2801 LED Strip 2048 Pixels Programmable LED RGB Controller

Model NO.
ATA-K-1000C
Voltage
5-24V
Material
Metal
Battery Type
No Battery
Pixels Controlling
2048pixels
Control Mode
22
Control Effects
32
Transmitting Speed
16
SD Card
256MB-16GB
IC Type Compatible
23
Warranty
2 Years
Trademark
ATA
Transport Package
Inner Box and K=K Carton
Specification
159*89*24mm
Origin
Made in China
HS Code
8537109090
Model NO.
ATA-K-1000C
Voltage
5-24V
Material
Metal
Battery Type
No Battery
Pixels Controlling
2048pixels
Control Mode
22
Control Effects
32
Transmitting Speed
16
SD Card
256MB-16GB
IC Type Compatible
23
Warranty
2 Years
Trademark
ATA
Transport Package
Inner Box and K=K Carton
Specification
159*89*24mm
Origin
Made in China
HS Code
8537109090

SD card LEDEDIT new software programmable LED strip controller K-1000C

RGB Pixel LED Controller K-1000C DC5-24V Programmable LED Light Control 2048 pixel led rgb controller UCS19/TM1804/WS28/SM167/GS82/SK6812/P9823/SM16716/P9813/LPD6803/LX1003/WS2801/LPD1886/TM1913/TM1914/P9883/P943/DMX512(UCS512,SM512,TM512,GS512)/DMX 500K/UCS5603-T/5603A/5603B/TM1804/INK1003/APA102/UCS8904/SM16714/SM16813/GS8512

Features 
1. Can control DMX512 lights, and with DMX address writer function
2. Can support rgbw IC products
3.32 to 65536 degrees Gray control, gamma correction procedure handle
4.Support different point, line light source and all kinds of rules and specific shaped handle
5.The controller has an output port, can support up to 512/2048 pixels (DMX lighting support up to 512 pixels)
6.Play content stored on the SD card, the SD card can save up to 32 effects file, SD card capacity support 256MB-32GB
7.The controller can use single-set, even multiple controller cascade, cascade optical isolation mode: interference, better stability, cascade distance between two controllers can reach up to 150 meters, need to use 0.5M2 pure copper power cable
8.The controller support chip can disable the support IC in software, or do not lock the support IC in the software, select the support IC through the controller CHIP button, this scheme is more flexible and convenient
9. For the DMX lighting IC, the controller comes with write address function, In addition, with the use of our 2016 LedEdit-K V3.26 or later edition can write a key address function setting
10.Support load lamp is 4 channels (RGBW) pixels or split in single-channel pixel point
11.Enhanced 485 TTL and 485 differential (DMX) signal output
12.The controller comes with the test effects as follows: 1 red, green, blue and black jump; 2 red, green, blue and black gradient; 3 red, green, blue and leaves

Parameters
1.Input voltage: DC5V-24V
2.Dimensions: 159*89*24mm
3.Weight: 230g
4.Number of programs: 32 MAX
5.MAX number of pixels: 2048 pixels
6.Compatible with single line or double line chips
7.32-65536 Gray level, Support software Gamma correction
8.Support the rules and special-shaped handle
9.Single-port output, can support 2048 pixels
10.Off-line(SD Card) control,play back content stored in the SD card
11.Multiple controllers can be cascaded together and work Synchronous, play back content stored in the SD card
12.ATA-K-1000C store a maximum of 32 programs, copy multiple files to the SD card in order, after formatting the SD card as "FAT" format 
13.The program must be named in orders. Just as: 00_1. Led, 01_1. Led, 02_1. Led. 
14. Play content stored in the SD card , the SD card can store up to 32 effects File, SD card capacity support 256MB-32GB
15. The controller support chip can lock the support IC in software, or not lock the support IC in the software, select the support IC through the controller CHIP button, this scheme is more flexible and convenient
16. Compatible with single line or double line chips

Notes:
1.The controller load lamps 512 points pixel, speed can reach up to 30 frames / sec, 1024 point pixel speed can reach up to 25 frames / sec, 2048 point pixel speed is about 15 frames / sec (the above parameter is an example of 1903 agreement IC, different IC have difference)

2. International standard DMX512 (1990 agreement) maximum support 512 pixels. When the load is international standard 170 pixels, the speed can reach up to 30 frames / sec, 340 pixels speed is about 20frames / sec, when 512 pixels speed is about 12 frames / sec.

3. ATA-K-1000C must use the new software LedEdit-K

4. If support RGBW four channels' lights should select ATA-K-1000C-RGBW

6. If support single channel light should choose ATA-K-1000C-W, at this time,one channel means one pixel, the software effect make as white lighting

Memory card
type:SD card
Capacity:128MB-2GB
Store file:*.led

Addressable Ws2812b Apa102c Sk6812 Ws2811 Ws2801 LED Strip 2048 Pixels Programmable LED RGB Controller



Addressable Ws2812b Apa102c Sk6812 Ws2811 Ws2801 LED Strip 2048 Pixels Programmable LED RGB Controller


IC Supported (PC Software Select K-1000-RGB)
IC supportedSoftware code&Pixel (MAX)Note
Controller type
TM1803,TM1804,TM1809,TM1812K-1000C-TM18032048divided into high and low speed
TM1829K-1000C-TM18292048divided into high and low speed
UCS1903,UCS1903B ,UCS1909,UCS1912K-1000C-UCS19032048divided into high and low speed
UCS2903,UCS2909,UCS2912,K-1000C-UCS29032048divided into high and low speed
UCS3903K-1000C-UCS10242048 
UCS6909,UCS6912,UCS7009,UCS5903K-1000C-UCS69092048 
TA9909K-1000C-TA99092048divided into high and low speed
MBI6021K-1000C-MBI60212048 
P9813K-1000C-P98132048 
WS2811K-1000C-WS28112048divided into high and low speed
INK1003K-1000C-INK10032048divided into high and low speed
TLS3100K-1000C-TLS31002048divided into high and low speed
DMX512K-1000C-DMX170/512DMX512
SM16711K-1000C-SM167112048divided into high and low speed
SM16716K-1000C-SM167162048 
SM16726K-1000C-SM167262048 
LPD6803,D705,1101K-1000C-68032048 
LPD8806,LPD8809K-1000C-88062048 
LPD1882,LPD1889K-1000C-18822048divided into high and low speed
LPD6812K-1000C-68122048divided into high and low speed
LPD6813K-1000C-68132048 
TM1903,TM1904,TM1909,TM1912K-1000C-TM19032048divided into high and low speed
WS2801,WS2803K-1000C-WS28012048 
D7710,D7720K-1000C-D77102048 
QC1109K-1000C-QC11092048 
TLS3001,TLS3008K-1000C-TLS3001* 
APA102K-1000C-APA1022048 
MY9221K-1000C-MY92212048 
BS0815K-1000C-08152048 
GW6203K-1000C-GW62032048 
BS0825K-1000C-08252048 
BS0901K-1000C-09012048 
HL32K-1000C-HL322048 
HL1809K-1000C-HL18092048 
HL2803K-1000C-HL28032048 
RGBK-1000C-RGB2048divided into high and low speed

Button Instruction
ButtonsDefinition 
SETSave Settings ( to save current settings file and the playback speed ) 
MODEChange programs 
SPEED+Speed upPress speed+ and speed- on the same time the program 
SPEED-Speed downWill play circularly 
 
   
DC5V+5V power input  
GNDPower GND input  
7.5-24V+7.5-24V power input  
POWERPower indicator  
ERRORError indicator  
SD CARDSD card slot  
 
   
TTL signal(245/spi signal)RS485 signal
CLKClock signalBSignal A / DMX+
DATData signalASignal B / DMX-
GNDSignal ground  


How to connect
Addressable Ws2812b Apa102c Sk6812 Ws2811 Ws2801 LED Strip 2048 Pixels Programmable LED RGB Controller





Addressable Ws2812b Apa102c Sk6812 Ws2811 Ws2801 LED Strip 2048 Pixels Programmable LED RGB Controller

Addressable Ws2812b Apa102c Sk6812 Ws2811 Ws2801 LED Strip 2048 Pixels Programmable LED RGB Controller



Applications
Addressable Ws2812b Apa102c Sk6812 Ws2811 Ws2801 LED Strip 2048 Pixels Programmable LED RGB Controller

Addressable Ws2812b Apa102c Sk6812 Ws2811 Ws2801 LED Strip 2048 Pixels Programmable LED RGB Controller


User Manual
:
Switch off power of the mains supply or respectively of the connection lead before doing any works
Assembly must not damage or destroy conducting paths
Make sure that the product is mounted on a stable, even and tilt-fixed background
The complete installation must be done by an electrical expert who is familiar with the valid directives
Addressable Ws2812b Apa102c Sk6812 Ws2811 Ws2801 LED Strip 2048 Pixels Programmable LED RGB Controller


Quaity Control:  
Stability TEST: make sure 100% of the lamps be aging test at least 48hours  
Lighting TEST: make sure 100% of the lamps be lighted before packing
Drop TEST: make sure every single light have been well protected by box

Contact
Peony Jin
Mobile:0086-180 0253 2737
Please feel free to send us your inquiry, We are at your service any time!