China JNGE factory direct sales MPPT solar charge controller with WiFi, Find details about China MPPT solar controller, solar controller regulator from JNGE factory direct sales MPPT solar charge controller with WiFi
System parameters | ||||
Current Rating | 30A | 40A | 50A | 60A |
System voltag | 12V,24V,48V | |||
Photovoltaic panel maximum input voltage | 20V-100V(12V system) | |||
40V-150V(recommended below 145V) (24V system) | ||||
80V-150V(recommended below 145V) (48Vsystem) | ||||
Rated operating current | 30A | 40A | 50A | 60A |
360W/12V | 480W/12V | 600W/12V | 720W/12V | |
PV panel maximum input power | 720W/24V | 960W/24V | 1200W/24V | 1400W/24V |
1440W/48V | 1920W/48V | 2400W/48V | 2880W/48V | |
MPPT efficiency | >99.5% | |||
Conversion efficiency | >96% | |||
Over charge | 16~17V, ×nV 16V,×nV | |||
Over voltage return | 15~15.5V, ×nV15V,×nV | |||
Charge limit voltage | 15.5~16V, ×nV15.5V,×nV | |||
Balanced charging voltage | 15~15.5V, ×nV15.2V,×nV | |||
Boost charge voltage | 14~15V, ×nV14.4V,×nV | |||
Boost charge return voltage | 12.3~13.5V, ×nV13.2V,×nV | |||
Floating charge voltage | 13.2~14.0, ×nV13.8V,×nV | |||
Over-discharge voltage | 9.8~11.8V, ×nV10.8V,×nV | |||
Over-discharge return voltage | 12.0V~13.0V, ×nV12.6V,×nV | |||
Blanced charging time | 1/2/3hours 1H | |||
Increase charging time | 1/2/3hours 1H | |||
Device address | 1~99 6 | |||
Light control turn-on voltage | 5~11V 5 | |||
Light control off voltage | 5~11V 6 | |||
Light control delay | 10min | |||
Temperature compensation | 0~4 4 | |||
Over temperature protection | 75ºC current reduction,90ºC off charging and load | |||
Working temperature | -20ºC~50ºC | |||
Storage temperature | -40ºC~80ºC | |||
Humidity | 10%to 90%without condensation | |||
Volum | 280*225*114mm |