China 20W C. C. 0-10V 10V PWM Dimmable Waterproof LED Driver 350mA 500mA 700mA 900mA, Find details about China Waterproof LED Driver, LED Driver 350mA 500mA 700mA 900mA from 20W C. C. 0-10V 10V PWM Dimmable Waterproof LED Driver 350mA 500mA 700mA 900mA
Feature
· Output constant current
· Universal AC input:100-265VAC
· Built-in active PFC function
· High efficiency up to 82%
· Protections:Short circuit/Over current/Over loading
· Cooling by free air convection
· IP67 design for indoor or outdoor installation
· Class 1 power unit
· Three in one dimming function(0/1-10Vdc or PWM signal or resistance)
· Dimming range: 0-100%
· Suitable for LED lighting and moving sign applications
· Compliance to worldwide safety regulations for lighting
· Three years warranty
Specification
Model | KI-50350A-DIM | KI-35500-A-DIM | KI-25700-A-DIM | KI-20900-A-DIM | |
Output | DC Current | 350mA | 500mA | 700mA | 900mA |
Current Tolerance | ±5% | ||||
Output Voltage range | 30-50V | 21-35V | 15-25V | 12-20V | |
Rated power | 17.5W | 17.5W | 17.5W | 18W | |
Open circuit voltage(Max) | 55V | 40V | 30V | 25V | |
Input | Voltage Range | 100~265VAC | |||
Frequency Range | 47~63HZ | ||||
Power Factor | PF≥0.92/120VAC PF≥0.88/230VAC PF≥0.85/265VAC(Full loading) | ||||
Efficiency(Typ.) | 82% | 82% | 82% | 82% | |
AC Current(Max.) | 0.2A | 0.2A | 0.2A | 0.21A | |
Leakage current | <0.5mA | ||||
Protection | Short Circuit | Hiccup mode, recovers automatically after fault condition is removed | |||
Over Loading | ≤120% | ||||
Over Current | ≤1.2*Iout | ||||
Environment | Working TEMP. | -40~+60ºC | |||
Working Humidity | 20~95%RH non-condensing | ||||
Storage TEMP.,Humidity | -40~+80ºC,10~95%RH | ||||
TEMP.coefficient | ±0.03%/ºC(0~50ºC) | ||||
Vibration | 10~500Hz, 5G 12min./1 cycle, period for 72min. each along X,Y,Z axes | ||||
Others | Net.Weight | 0.35Kg | |||
Size | 262*29*20mm(L*W*H) | ||||
Packing | 325*300*190mm 50PCS /CTN | ||||
Notes | 1. All parameters NOT specially mentioned are measured at 230VAC input , rated load and 25ºC of ambient temperature. 2. Tolerance:includes set up tolerance,line regulation and load regulation . 3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation,the final equipment manufactures must be-qualify EMC Directive on the complete installation again. |