High Chrome Iron A05 Impeller Casing Liner Expeller

China High Chrome Iron A05 Impeller Casing Liner Expeller, Find details about China Impeller, Pump Impeller from High Chrome Iron A05 Impeller Casing Liner Expeller

Mqq
1 Set
OEM
Accept
Certificate
ISO 9001, Ce
Pump Type
Ah Hh M L Sp Af G
After Sales
Yes
Color
Blue, Yellow, and etc
Trademark
Naipu Or OEM
Transport Package
Packed with Wooden Box or as Customer′s Request
Specification
CE, ISO, SGS
Origin
Shijiazhuang, China
HS Code
8413709990
Mqq
1 Set
OEM
Accept
Certificate
ISO 9001, Ce
Pump Type
Ah Hh M L Sp Af G
After Sales
Yes
Color
Blue, Yellow, and etc
Trademark
Naipu Or OEM
Transport Package
Packed with Wooden Box or as Customer′s Request
Specification
CE, ISO, SGS
Origin
Shijiazhuang, China
HS Code
8413709990
                             OEM Large ULTRACHROME 27% Cr Impeller

 ShiJiazhuang Naipu Pump Co.,Ltd , is not  only a factory water pump , slurry pump , sand dredging pump .

We also our own casting workshop and machining workshop , can do many kind of casting parts and machining parts according to customer's  drawing .

Naipu would like to be your factory in China!


 OEM Large ULTRACHROME 27% Cr Slurry Pump Impeller Picture

High Chrome Iron A05 Impeller Casing Liner Expeller
High Chrome Iron A05 Impeller Casing Liner Expeller
High Chrome Iron A05 Impeller Casing Liner Expeller
High Chrome Iron A05 Impeller Casing Liner Expeller




Metal Material
 
CodeMaterial #Hardness 
HRC
PerformanceApplication
A01KmTBCr8≥55Abrasion-resistant performance is about 10% less than A05Mud & slag application
A03KmTBNi4Cr2≥56Abrasion-resistant performance is about 20% less than A05Neutral water-sand slurry and applications with lower impact load
A05KmTBCr26≥56Ranks second only to A07 in abrasion-resistant performance; fair corrosion-resistant performance.High impact load abrasion condition; PH rate ranging from 5 to 12
A07KmTBCr15Mo3≥59Best abrasion-resistant performance; corrosion-resistant performance is inferior to A05High impact load abrasion condition
A11KmTBCrMnMo338-42Mild corrosion-resistant; lower hardness; drilling and tapping operations are applicable.Fine particles with light abrasion.
A33 ≥35Abrasion-resistant performance is close to A03; fair corrosion-resistant performanceOxide slurry with PH rate no less than 1, like phosphor-gypsum in phosphate fertilizer plant, nitric acid, sulph-oacid and phosphoric acid, etc.
A49 ≥43Fair abrasion-resistant performance, close to A03; fair corrosion-resistant performance in media with lower PH rate.Corrosion conditions with low PH rate, especially for flue gas and FGD devices for media of PH≥4; general suitable for lower acid condition.
A12 ≥62Higher abrasion-resistant performance than A05; fair corrosion-resistant performance; suitable for media with PH rate is 6-16, where A05 is not suitable.High abrasive slurry with fine particles.
A61 63-68Optimized abrasion-resistant performance than A12High abrasive slurry with fine particles.

Rubber Material
 
MaterialMaterial #Applications
Natural RubberR08R08 is low to medium hardness rubber used for impellers where slurry contains fine particles and erosive.
Natural Rubber(soft)R26R26 is soft natural rubber used for liners where slurry contains fine particle and more erosive.
Natural Rubber(soft)R33R33 is widely used for frame plate liners, cover plate liners and impellers. Maximal particle diameter is 10mm; impeller peripheral speed should be less than 25m/s; suitable for temperature not exceeding 75ºC.
Natural RubberR55R55 is widely used for impellers, frame plate liners, cover plate liners and throat bushes. Maximal particle diameter can be 20mm, impeller peripheral speed should be less than 27.5m/s; suitable for temperature not exceeding 75ºC.
EPDM RubberS01S01 is widely used for impellers, frame plate liners, cover plate liners and throat bushes. Maximal particle diameter can be 8mm; impeller peripheral speed should be less than 25m/s; suitable for temperature not exceeding 120ºC(continuous duty) or 140ºC(discontinuous duty).
Nitrile Rubber(NBR)S12S12 is widely used for frame plate liners, cover plate liners, throat bushes, lip seals, impellers and expellers. Maximal particle diameter is 7mm; impeller peripheral speed should be less than 27m/s; suitable for temperature not exceeding 95ºC.
Butyl RubberS21S21 is widely used for impellers, frame plate liners, cover plate liners, expellers, volute seals and throat bushes,. Maximal particle diameter can be 7mm; impeller peripheral speed should be less than 30m/s; suitable for temperature not exceeding 100ºC.
HypalonS31S31 can be used for impellers, frame plate liners, cover plate liners and throat bushes,. It is recommended to use for strong acid slurry with mild or moderate corrosion. Maximal particle diameter can be 10mm; impeller peripheral speed should be less than 30m/s; suitable for temperature not exceeding 110ºC.
Description:

An impeller is a rotating component of a centrifugal pump which transfers energy from the motor that drives the pump to the fluid being pumped by accelerating the fluid outwards from the center of rotation.The velocity achieved by the impeller transfers into pressure when the outward movement of the fluid is confined by the pump casing. Impellers are usually short cylinders with an open inlet (called an eye) to accept incoming fluid, vanes to push the fluid radially, and a splined, keyed, or threaded bore to accept a drive-shaft.
The impeller made out of cast material in many cases may be called rotor, also. It is cheaper to cast the radial impeller right in the support it is fitted on, which is put in motion by the gearbox from an electric motor, combustion engine or by steam driven turbine. The rotor usually names both the spindle and the impeller when they are mounted by bolts.


Slurry Pump Spare Parts
Main Slurry Pump Parts : Impeller , Volute Liner , Casing , ThroatBush, Frame Plate Liner Insert , Cover Plate , Frame Plate, Pump Liner Expeller , Expeller Ring ,Stuffing Box , Expeller , Pump Shaft , shaft sleeve, Shaft Spacer, Bearing Assembly , Base, Stuffing Box, Gland Assembly, Bearing Housing , Lantern Ring , pump discharge pipe , flange , and so on.

High Chrome Iron A05 Impeller Casing Liner Expeller
 Rubber Pump Spare Parts

High Chrome Iron A05 Impeller Casing Liner Expeller

Casting Workshop:
High Chrome Iron A05 Impeller Casing Liner Expeller
Machining Workshop:

High Chrome Iron A05 Impeller Casing Liner Expeller

Quality Inspection

Our factory have strict Quality control system, has been proved by ISO 9001: 2008, CE, SGS.

Quality Control Process

Stages of manufacture

  Quality Control Activities

 Specification
   
Inspection result 

Raw material arrival

Sampling, material chemical analysis 
NPB121.1-29-1997 

Casting and composition

Material chemical analysis of pump parts
NPB121.1-29-1997 

Casting quality inspection
NPB302-1998 

Key component machining

Dimension precision inspection
NPB2105-87 

Impeller balancing
NPB061-2000 

General assembly

Procedure operation
NPB2103-96 

Hydraulic static test
NPB064-1998  

Performance test of pump unit

Capacity and head
NPB0157-1997 

Vibration and noise
JB/T8097-95 

Bearing temperature
JB/T5295-91 


Final inspection

Packaging of pump unit
NPB0157-1997 

Documents
NPB0157-1997 

Spare parts and accessories
NPB0157-1997 

High Chrome Iron A05 Impeller Casing Liner Expeller

Our Service

1. Quick Reply 
Your inquiry related to our products or prices will be
replied within 12 hours. 

2.Technical Surport .
We have a group of high quality technicians with rich experience who can solve everything  during the whole process.

3.Guarantee quality.
All the products  have proved by ISO 9001:2008, CE, SGS. And also will be inspected strictly before delivery.

4.Perfect after -sales .

We will be responsible for the whole life period

5.OEM order.Many material are available ,like High chrome, rubber , stainless steel and etc.Steely alloy.



 
Welcome to contact us 
 
 

ShiJiaZhuang NaiPu Pump Co.,Ltd

Contact person :Kitty Liu

  

Shijiazhuang, Headquarters

Add.:No.368, Xinshi North Road, Shijiazhuang, Hebei Province, China
 

Welcome to visit our factory!


High Chrome Iron A05 Impeller Casing Liner Expeller