Asia Market Polycarboxylate Superplasticizer,Concrete Addictive , 50% High Water Reducing Ratio Admixture PCE for Long Distance Pumping Concrete,Lignosulphonate
China Asia Market Polycarboxylate Superplasticizer,Concrete Addictive, 50% High Water Reducing Ratio Admixture PCE for Long Distance Pumping Concrete,Lignosulphonate, Find details about China 50% 40% 60% Solid Content PCE, Polycarboxylate Concrete Admixture from Asia Market Polycarboxylate Superplasticizer,Concrete Addictive, 50% High Water Reducing Ratio Admixture PCE for Long Distance Pumping Concrete,Lignosulphonate
PCE superplasticizer is the newest generation superplasticizer used for concrete in domestic and abroad. Comparing with PNS and other superplasticizer, PCE superplasticizer has many characteristic advantages in technology and performance as following:
(1) low dosage, high rate of water reducing;
(2) keep concrete good slumption retention;
(3) good compatibility with cement;
(4) small shrinkage of concrete to keep the stability of volume and durability;
(5) environmental in production and usage. Base on above advantages.
It is based on molecular designs and adsorption capacity of polycarboxylate,we do R&D and successfully produce water reducing and retention type polycarboxylate superplasticizer for concrete.With initiating systerm and reaction conditions,we achieve high adaptability.
·Homogeneity Index
| Items | Enterprise Standard |
| Apperance (23ºC) | Colourless to light yellow,viscous liquid |
| PH Value (23ºC) | 6.5±1 |
| Solid content (%) | 40±0.5 and 50±0.5 |
| Content of Chloride (%) | ≤0.10 |
| Water Reducing Ratio (%) | ≥28 |
Safety and Attention:
1.This product is alkalescence solid without toxic, corrosiveness and pollution.
It is unedible when it come to body and eye, please wash it in clean water. When there is allergy for some body, please send the person to hospital rapidly for cure.
2.This product is storaged in paper barrel with PE bag inner. Avoid rain and sundries to mix
in.
3.Quality guarantee period is 12 months.
Polycarboxylate Superplasticzier we produce types as below:
(normally they can be satisfied for concretes' requirements):
JH03 basic standard type(under most exported.)
JH09 viscosity adjustment is better than JH03,water reducing ratio is lower than JH03,(suitable for high clay content ratio of cement,under most exported.)
JH15 water reducing ratio is higher than JH03,concrete's performance is better than JH03,suitable for high strength concrete.(New Research.)
JH600 water reducing ratio is similar with JH03,normally concrete's performance is better than JH03,according to local raw materials of concrete.(New Research.)
2. Water reducing and slump retention type
JH02 water reducing and slump retention type.(New Research.)
3. High slump retention type
(if concretes' slump retention is not satisfied):
JH06 basic standard type,mix with JH03 and JH09 if concrete's slump retention is not satisfied.(under most exported.)
JH06K slump retention performance better than JH06,price is a littler higher,mixing with JH03 and JH09 if concrete's slump retention is not satisfied.(under most exported.)
JH16 different technology with JH06 and JH06K,mixing with JH03,JH09 and JH15 if concrete's slump retention is not satisfied.(New Research.)
JH700 higher slump retention type,mixing with JH03,JH09 JH15 and JH600 if concrete's slump retention is not satisfied.(New Research.)
Notice:
- Every type of PCE has 40% 50% solid content.
- When mix water reducing type PCE with slump retention type,the suggested mixing ratio is 8:2 or 7:3 or 6:4 by weight.
·Scope of Application
PCE can be widely used in all kinds of concrete projects and cement product,for example:1.Suitable for long-distance construction projects type pumping concrete.
2.Suitable for compounding normal concrete,high-performance concrete,high-strength concrete and ultra-high strength concrete.
3.Suitable for impervious,antifreezed and high durability concrete.
4.Suitable for high-performance and high flowing concrete,self-leveling concrete,fair-faced concrete and SCC(self compact concrete).
5.Suitable for high dosage of mineral powder type concrete.
6.Suitable for mass concrete that used in expressway,railway,bridge,tunnel,water conservancy projects,ports,wharf,underground etc..
·Usage
1. Recommended dosage ( by binding materials' weight) is 0.25%-0.60%( on the base of 40% solid content). The optimum dosage is according to the reality project conditions and actual materials.
2. Compatibility test should be done in advance when used with other additives.
3. Precise measurement avoids repeat dosage,seep dosage and errors.
·Storage and Safety Matters
1. it should be stored at temperature from 0ºC-40ºC. Keep out of sun,rain,impurity.Avoid evaporation of water.
2. quality guarantee period:180 days. Retest should be done when it beyond validity,and can be used when it's qualified.
3. non-toxic, non-polluting and non-edible. Avoid touching with eyes and skin allergy people. If touching,should clear with water and timely go to see doctor..
We could supply services as below:
technical support about concrete air content,polycarboxylate ether and ester difference,usage of other concrete admixtures in PCE, and also we could help you adjust the test redults of PCE with your raw materials data of concrete.
the first generation water reducers are:lignosulfonate types(Na,Mg,Ca).
the second generation water reducers are:naphthalene sulfonate type,Sulfonated melamine formaldehyde type,aliphatic series,aminosulfonic acid series.
the third generation water reducer are :Polycarboxylate based superplasticizer.
Test Method 1 suggested:
| Dosage of 50% PCE % | Ratio of Water reducing %(at least) |
| 0.03 | 28-30 |
| 0.35 | 28-30 |
| 0.4 | 32 |
| 0.45 | 32 |
| 0.5 | 32-40 |
| 0.6 | 35-40 |
| Standard=1.2 g PCE + 87g Water + 300g Cement | |
Test Method 2 suggested:
10%PCE=10g 50% PCE +90g water
(10%PCE is 5 solid content = 50*10%)
Proportion of concrete:
Cement 450g
Sand 1350g
Water 160g
10% PCE 12g
(different countries have different size and stand of sand and gravel),when you do test,you can let us know the size of your concrete raw material.)
ZIBO JOYREACH NEW MATERIALS CO.,LTD is a leading Project Investment Management enterprise of construction products in China.We mainly specialize in materials' R&D,invest production cost,domestic sale and international exporting sale.
2009,invests, produces and sells polycarboxylate superplasticizer,naphthalene superplasticizer,concrete construction chemicals.
2015,establishes independent Im&Ex department-Zibo JoyReach for exporting China products.
Zibo JoyReach in 2009,we started to invest to produce concrete admixture,named Polycarboxylate superplasticizer.We do R&D and production of polycarboxylate superplasticizer PCE mother liquid and Naphthalene superplasticizer.We have more than 10 kinds of different polycarboxylate ether(PCE) for applications ranging from SCC to precast and now supply to more than 11 countries in the world.President-Mr Zhang,has a lot of new technology and patents in this field.Every year we export our large amounts of products to many countries,and get good feedback from our customers.Those advantages will promote our goods quality.Through efforts with two years,we start a new working team on service for concrete admixtures' clients.Now we have achieved lead-edge technologies such as polymerization of macromonomer,molecule designs,functionalization,compounding.
Based on the development, cooperation and win-win policy,in 2015 Zibo JoyReach has introduced some related products to export for international business' requirement.At present we develop and export successfully a series of new products,including water treatment equipment, water softener, pure water machine/water purifier,ultra-pure water machine, hemodialysis water machine, polycarbonate film,PC film,PC sheet,and related construction chemicals such as retarder sodium gluconate, accelerating agent aluminum sulfate solution,preservative formalin solution,flame retardant aluminum hydroxide,catalyst alumina and pseudo boehmite,calcined alumina.
We have more than 10 staff for working on Integrating the information of high quality manufacturers, and make long-term cooperation plans.Now we have become an international enterprise with production,sales and technology.
1.What s the payment term?
30-50% TT in advance(based on your qty ), 50-70% balance against copy B/L in 7 workdays.
2.When will you arrange production?
In 7 workdays when we receive your advance payment.
3. When will you send BL copy?
In 3-5 workdays after shipment date.
4. When will you send original Documents
In 3-5 workdays when we get the balance.
5. From we pay the advance to we get the goods what other service you can provide?
A Send photos from raw material to shipment.
B Notice and remind you when will you get the goods.
C Advise or Solve when you meet the problem during your production.
You Might Also Like
S6-150 Gearbox Spare Parts Synchronizer Ring 1297 304 484 fo......
Dongfeng Mini 4cbm 5cbm Vacuum Sewage Truck
Luxury Custom Cardboard Paper Clothing Packaging Box
Automatic Sectional Garage Door Motor
Pure Tungsten Target for Sputtering Coating/Chamfer 45 Degre......
NiCd AA 700mAh 7.2V 9.6V Rechargeable Battery Pack with Plug
290mm Night Use Belted Ultra Thin Feminine Hygiene Pad
2/5/10m USB LED String Lights Bulb Outdoor Waterproof Garlan......
5ml Cylinder Essential Oil Glass Vial with Rubber Dropper
Prepianted Color Coated Aluminum Strip Coil for Transformer
RF Coaxial Connector Qma Female Solder for Rg405 Cable
Nal -800g5 Automatic Plastic Material Vacuum Auto Loader