Specifications

This medium-sized dozer leads the pack with huge push factors for greater efficiency on

tougher earthmoving jobs. Indeed, when compared with competitors in its class, it provides
much better value when it comes to push factors. Comes standard with a Cummins engine.

Features:

The high power cummins NT855-C280S10 engine, high efficiency turbocharger, widens the
efficient working area of the engine, and the fuel consumption is lower.

The mature and stable hydraulic torque converter, high reliability power shift gearbox, the final
transmission of the second straight tooth structure can be efficiently transmitted power and have
high durability.

The engine can work normally and reliably under any load conditions and any hot environment
that the user must have, without causing the engine to overheat.

Low all the host of the box structure frame has high load bearing impact load and bending torsional
ability, high performance materials and the application of high strength castings to make it more
strong, high quality weld to ensure that the host has a full life cycle.

Advanced energy-saving hydraulic circuit, working pressure of 19.1MPa, low energy consumption,
convenient maintenance.

The whole cast plastic instrument panel, the shape is beautiful, realized the domestic market failure
automatic diagnosis, the whole process monitoring.

The chassis system has strong traction and durability, as well as adaptability and stability of various
complex working conditions.

According to the principle of ergonomics, variable speed, steering and throttle control are set on the
left side of the driver, and the soft shaft structure is adopted.The working device control is centrally
arranged on the right side of the driver, the servo control system is adopted, and the control is light
and flexible.

The vertical spatula of the standard is of strong cutting force and durability, while the u-shaped shovel
can be selected by the user.The single - tooth solder has adjustable soil Angle and strong penetrating
power, and there are three - tooth turreders, which can be used by the user.

230 HP  SD23  Technical  specifications:	Blade Type	Straight-tilt	Angle	U-Blade
	Min. ground clearance:	405 mm	405 mm	405 mm
	Operating weight:	23.45 t	23.67 t	24.6 t
	Min. turning radius:	3.3 m	3.3 m	3.3 m
	Ground pressure:	0.078 MPa	0.078 MPa	0.078 MPa
	Gradeability:	30°	30°	30°
	Track gauge:	2000 mm	2000 mm	2000 mm
ENGINE	Model & type	Cummins NT855-C280S10; in-line, water-cooled;  4-cycle, overhead valve direct injection, turbocharged diesel
	Rated revolution	2000 rpm
	Rated power	169 kW
	Number of cylinders	6-139.7 x 152.4 mm (bore x stroke)
	Piston displacement	14.010 L
	Min. fuel consumption	217 g/kW·h
	Maximum torque	1036 N·m@1400rpm
POWER TRANSMISSION SYSTEM	Torque converter	3-element, 1 stage, 1 phase
	Transmission	Planetary gear, multi-disc clutch,  hydraulically connected, forced lubrication
	Main drive	Spiral bevel gear, splash lubrication,  single-stage speed reduction
	Steering clutch	Lubricated, multidisc, spring loaded, hydraulically separated, hydraulic control
	Steering brake	Lubricated, floating, direct on-off hydraulic inter-linking operation
	Final drive	2-stage speed reduction of spur gear,  splash lubrication
TRAVELSPEED	Gear	1st	2nd	3rd
	Forward	0~3.8 km/h	0~6.8 km/h	0~11.8 km/h
	Reverse	0~4.9 km/h	0~8.5 km/h	0~14.3 km/h
UNDERCARRIAGE SYSTEM	Type	Swing type of sprayed beam, suspended structure of equalizer bar
	Carrier rollers	2 each side
	Track rollers	7 each side (single flange 5, double flange 2)
	Track type	39 each side (assembled single-tooth shoes)
	Width of track shoes	560 mm
	Pitch	216 mm
HYDRAULIC SYSTEM	Maximum pressure			19.1 MPa
	Pump type			Gear pump
	Discharge (Tondem 2000 rpm)			194 (2000 rpm) L/min
	Bore of working cylinder × no.			110 mm × 2
BLADE	Blade type	Straight-tilt	Angle	U-blade
	Dozing capacity	7.8 m3	5.4 m3	8.4 m3
	Efficiency  (Theoretical value 40 m)	330 m3/h	245 m3/h	365 m3/h
	Blade width	3725 mm	4365 mm	3860 mm
	Blade height	1395 mm	1107 mm	1379 mm
	Maximum drop below ground	540 mm	560 mm	540 mm
	Maximum tilt adjustment	>1210 mm	>1240 mm	>1210 mm
	Weight of blade	2900 kg	3372 kg	3350 kg
RIPPER  (OPTIONAL)	Maximum digging depth of 3-shank ripper	666 mm
	Maximum lift above ground	555 mm
	Weight of 3-shank ripper	2495 kg
	Maximum digging depth of single ripper	695 mm
	Maximum lift above ground	515 mm
	Weight of single ripper	2453 kg

Photos:




1.. Which countries do we export to?
Asia: Vietnam, India, Indonesia, Pakistan, Kazakhstan, Uzbekistan, etc.
Europe: Russia, Belarus, Ukraine, Lithuania, Saudi Arabia, etc.
South America: Brazil, Chile, Paraguay, Argentina, etc.
Africa: South Africa, Ethiopia, Libya, Ghana,Algeria,etc.

2.What are our advantages compared with other manufacturers/factories?
1)Reliable Quality: Carefully select regular manufacturers for supporting spare parts,
like engines,bridge,transmissions,and many parts designed and produced by ourselves,
always adapting the best materials.
2)Competitive Price: Concentration of mechanized production in large quantities reduce
production cost to ensure that our price is competitive.
3)Service Team: First, our sales managers are online 24 hours,ready to answer your
questions at any time. Second, professional maintenance team with senior technicians, 
ready to provide support services to users and dealers. Most problems can be solved 
within 24 hours.
4)Fast Delivery:Under normal circumstances,we can delivery with 10 working days in
factory after receiving pre-payment.
3.Which payment terms can we accept?
Normally we can work on T/T or L/C.
1)On T/T term, 30% payment is required in advance for production, 70% balance shall 
be paid before delivery or against the copy of original B/L for old long cooperation clients.
2)On L/C term, 100% irrevocable L/C at sight without "soft clauses" can be accepted. 

Other questions, please contact me directly!!