Jc631 Differential Pressure Transmitter / Sensor for Leak Detection
China Jc631 Differential Pressure Transmitter / Sensor for Leak Detection, Find details about China Differential Pressure Transmitter, Differential Pressure Sensor from Jc631 Differential Pressure Transmitter / Sensor for Leak Detection
Basic Info.
Model NO.
Jc631
Influence of Static Pressure
±0.05%Fs/100kpa
Long-Term Stability
±0.1~±0.3%Fs/Year
Range of Power Supply
12~36V DC
Response Time
≤2 Ms
Insulation Resistance
100mΩ,500VDC
Weight
0.35kg
Trademark
jiucheng
Origin
Nanjing, China
Model NO.
Jc631
Influence of Static Pressure
±0.05%Fs/100kpa
Long-Term Stability
±0.1~±0.3%Fs/Year
Range of Power Supply
12~36V DC
Response Time
≤2 Ms
Insulation Resistance
100mΩ,500VDC
Weight
0.35kg
Trademark
jiucheng
Origin
Nanjing, China
Product Desciption
JC631 Differential Pressure Transmitter / Sensor for Leak Detection Overview:
JC631 differential pressure transmitter / sensor adopts foreign-made differential pressure sensitive chips and special transducer integrated circuits as well as high-performance keycomponents and strict production process to ensure that this series product features superior performance, small dimensions and easy installation. Therefore, it is the optimum choice for micro differential pressure, flow field, flow rate, and flow measurement.
JC631 Differential Pressure Transmitter / Sensor for Leak Detection Features:
* High cost performance
* Reliable and stable performance
* Range of differential pressure: 0 ~ 10KPa ... 2MPa
* Resistant to static pressure of up to 20MPa
* Fully made of stainless steel, with small dimensions, light weight, and easy installation
JC631 Differential Pressure Transmitter / Sensor for Leak Detection Application:
* Industrial process control
* Medical instrument
* Aerodynamic measurement
* Hydraulic and pneumatic equipment
* Flow measurement
Technical Parameters:
Ordering Information:
Tips for Type Selection
* In order to guarantee safe and reliable operation of the transducer, it is recommended that the three-valve manifold should be installed between the point to be measured and the transducer to ensure that the medium to be measured is slowly and evenly applied on the positive and negative chambers.
* During installation, it is recommended that pressure connections on both ends should be located above the horizontal line so as to minimize the influence of the installation position on the product.
* During type selection, please note that the static pressure to be measured shall be less than 20MPa and the overpressure to be applied on the positive and negative chambers shall not exceed the specified value of the product.
* As an additional function code for type selection, the code "E" for intrinsically safe explosion-proof type Ex iaIICT6 denotes that power source must be supplied via safety barrier.
* For other special requirements, please discuss with us and clearly indicate them in the order.
More Pressure Sensor / Transmitter
You Might Also Like
Triac 0-10V Dali Dimmable Recessed LED Downlight/ COB LED Ce......
GMP Factory Supply Food Grade Phycocyanin Spirulina Extract
Table Tennis Racket with Rubber + Bag Ping Pong Bat
3mh Cool Giant Fat Inflatable Cat Cartoon for Advertising
Mslfp14 17*17 Wired Box Size X-ray Digital Flat Panel Detect......
Portable Glass Shape Edge Polishing Machine
A4 A3 Paper Wrapping Machine
Stainless Steel Angle Tube Strainer
Sinchold 9220/20/45 Forged Steel Welded Crane Rail Clips
Warehouse Tent Made by Superb Tent
Thyristor Rectified CO2 MIG Mag Arc Welding Machine