Products

Highway Crash Barrier System Buffer End Terminals

China Highway Crash Barrier System Buffer End Terminals, Find details about China Fencing Ending, Guardrail Terminal End from Highway Crash Barrier System Buffer End Terminals

Model NO.
DC-GR-191576
Raw Material
A572/Q345b/Ha350/Q235B/A36/S355jr/S275jr
Zinc Coating Weight
300/550/610/900/1100/1220 G/M2
Yield Point
Minimum 355MPa
Tensile Strength
Minimum 495MPa
Elongation
in 50mm (2 in), Minimum, 15 Percent
Applied Standards
Aashto M-180, En-1317, AS/NZS 3845-1999, etc.
Beam Thickness
2.5/2.6/2.67/2.7/2.8/2.82/3/4/4.5/10/20mm
Post Thickness
3/4/4.3/4.5/5/5.5/6/7/9/10/20mm
Post Styles
I/U/C/H/Upn/Unp/Ipe/Z/Round/Sigma Section
Spacer Styles
I/U/C/H/Upn/Unp/Ipe/Z/Round Section/Metallic Type
Trademark
DACHU
Transport Package
Standard Export Packing
Specification
700*312*3 mm/R160/R250/R500
Origin
China
HS Code
7308900000
Model NO.
DC-GR-191576
Raw Material
A572/Q345b/Ha350/Q235B/A36/S355jr/S275jr
Zinc Coating Weight
300/550/610/900/1100/1220 G/M2
Yield Point
Minimum 355MPa
Tensile Strength
Minimum 495MPa
Elongation
in 50mm (2 in), Minimum, 15 Percent
Applied Standards
Aashto M-180, En-1317, AS/NZS 3845-1999, etc.
Beam Thickness
2.5/2.6/2.67/2.7/2.8/2.82/3/4/4.5/10/20mm
Post Thickness
3/4/4.3/4.5/5/5.5/6/7/9/10/20mm
Post Styles
I/U/C/H/Upn/Unp/Ipe/Z/Round/Sigma Section
Spacer Styles
I/U/C/H/Upn/Unp/Ipe/Z/Round Section/Metallic Type
Trademark
DACHU
Transport Package
Standard Export Packing
Specification
700*312*3 mm/R160/R250/R500
Origin
China
HS Code
7308900000
Guardrail End Terminal Introduction
Galvanized Steel Crash Barrier Terminal Ends are the specially designed end pieces of a road safety barrier system. The leading terminal is on the end of the road safety barrier system that faces oncoming traffic and the trailing terminal is on the other end. Guardrail end terminals are designed to provide a soft gating impact to prevent the end rail from spearing an impacting vehicle. Terminals also introduce tensile and flexural strength necessary to ensure redirection performance of the length-of-need section.

Highway Crash Barrier System Buffer End Terminals

Guardrail Specification
Base MaterialA572/Q345B/HA350/Q235B/A36/S355JR/S275JR
W-Beam2320/3320/4128/4130/4318/4320/7938*308/310/311/312/315*2.5/2.6/2.67/2.7/2.75/2.76*2.8/3/4/5/10
Thrie-Beam2320/3320/4128/4218/4318/4320*506/508/510*2.76/2.8/3/4/4.5/5/10
Surface TreatmentHot Dip Galvanized or Powder Coated
Galvanizing Thickness 300g/m2 (40µ), 550g/m2 (80µ) or 610g/m2 (85µ) or 1100 g/m2 (160µ) or 1220 g/m2 (170µ) or customized
Certificate AASHTO, AS/NZS, EN, ISO9001, ISO14000, SGS, CE, BV
FeatureGreat corrosion resistant, high intensity, long and durable,  low cost, higher security, environmental protection, etc.
OtherOther special specification as per client's requirement or drawings.

Requirements for the Guardrail Surface Finish
A road safety barrier system shall have a surface finish that minimizes the friction between the system and an impacting vehicle. The surface finish shall be uniform, resistant to incidental damage and shall not be affected by detergents and similar agents that may be used to clean the external surfaces. Protrusions from the surface, which are likely to be struck by an impacting vehicle, shall not exceed 20 mm. Any protrusions shall be rounded or similarly treated, to reduce the possibility of snagging the body work of a vehicle or catching at the person or clothing of an individual. After construction, components shall not be left with splits, burrs or sharp edges after construction. Lapping of elements shall be in the direction of the potential path of an errant vehicle.

We manufacture highway guardrails according to the Standards as below:

A. AASHTO-M180 (Corrugated Sheet Steel Beams For Highway Guardrail - USA)

B. AS/NZS 3845:1999(Road Safety Barrier Systems - Australia/New Zealand)

C. BS EN-1317(Road Restraint Systems - Europe)

D. JT/T 281-1995(Corrugated Sheet Steel Beams For Expressway Guardrail - China)

E. Or tailor-make according to client's requirements  

Company Qualifications:
Highway Crash Barrier System Buffer End Terminals
Highway Crash Barrier System Buffer End Terminals

Our Production Process for Galvanized Guardrail: 
Highway Crash Barrier System Buffer End Terminals


Our Production Process for Sprayed Guardrail: 
Highway Crash Barrier System Buffer End Terminals


Our guardrails:

Highway Crash Barrier System Buffer End Terminals

Guardrail Posts:

Highway Crash Barrier System Buffer End Terminals

How to inquire and place guardrail order to us ? 

 

Step 2:  Provide your specification and quantity to us, or we could offer our guardrail product list  for your reference to choose 

Step 3:  We will made detailed quotation as soon as we received your specification and quantity

Step 4:  Samples can be arranged if needed, the sample is free to you, you just need to bear the postage fee

Step 5:  Factory visit if possible, you will be warmly welcomed

Step 6:  Confirm the order, we will arrange the production as soon as the advance payment is received

Step 7:  Confirm the delivery time, balance payment need to be arranged before the goods is dispatched

Step 8:  You could contact us for any questions even after sales. 

Contact us today for an estimate.  You are the most welcome to visit our production premises. 

Wuhan Dachu Traffic Facilities Co.,Ltd. 
(Company Code: 91420114303720312K;  Trade Licence Code: 03027006;  Customs Code: 420196619D )
 

You Might Also Like