C50 Building Reinforcement with High Strength Non-Shrinkage Grouting Material
China C50 Building Reinforcement with High Strength Non-Shrinkage Grouting Material, Find details about China Grouting Material, Cement Based Grouting from C50 Building Reinforcement with High Strength Non-Shrinkage Grouting Material
Basic Info.
Model NO.
LGM-3
Casting Demand (Kg/M3)
2200-2400
Color
Gray
Shape
Granular
Trademark
LGM
Transport Package
Ton Bags or Pallets
Specification
50 kilos per bag
Origin
Jinan, Shandong Province, China
Model NO.
LGM-3
Casting Demand (Kg/M3)
2200-2400
Color
Gray
Shape
Granular
Trademark
LGM
Transport Package
Ton Bags or Pallets
Specification
50 kilos per bag
Origin
Jinan, Shandong Province, China
Product Desciption
Product introduction
Early strength high strength non - shrinkage grout
Technical indicators
[ characteristics ]
1. Early strength, high strength
The compressive strength can reach above 50MPa in 1-3 days, and the
equipment can be put into use after one day of installation.
2. Since the flow
Only need to add water to mix the site can be carried out, without vibration,
mortar flow to ensure no leakage grouting.
3. Micro expansion bulge
The casting body shall be used for a long time without shrinkage to ensure
the close contact between the grouting material and the foundation.
4.For a long time resistance
2 million fatigue tests and 50 freeze-thaw cycle tests showed no significant
change in strength and no subsequent decrease in strength.
4. Oil anti-permeability
After soaking in the oil for 30 days, its strength increases by more than 10%
compared with that before immersion.
[usage]
1.Anchor anchor for mechanical equipment
2.Grouting of equipment foundation or steel structure column footplate
3.Building structural reinforcement and repair
4.Post tensioned prestressed concrete structure with tunnel grouting
5.Anti-seepage anti-crack waterproof concrete project
6.Reinforcement planting reinforcement grouting
7.Bridges, roads, tunnels
8.Substitute epoxy mortar
Company introduction
Shandong Luming new materials Co., Ltd. was founded in 2005, is a manufacturer of amorphous refractory castables, non shrinkage grouting materials and high temperature pre products.
The company has two full-automatic production lines, the introduction of a complete set of advanced testing equipment, the establishment of a sound testing process, to ensure that customers with high-quality products and services.
The company has passed ISO9001 international quality management system certification, ISO14001 environmental management system certification and intellectual property management system certification, and has passed the field inspection and obtained the certificate. The company has several independent national intellectual property rights and is recognized as a high-tech enterprise.
You can discuss your purchase requirements with our customer service center, whether you are choosing the current product from our catalog or seeking engineering assistance for your application.
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: When was the company established?
A: The company was established in 2005.
Q:What is the business scope of the company?
A: Company mainly engaged in the development, production and sales of advanced new amorphous refractory castables, high temperature resistant pre-products, high strength non-shrinkage grouting materials and other products.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. Or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q:How can I reach you?
Address: No. 7136, Airport Road, High-tech Zone, Jinan, Shandong, China
Early strength high strength non - shrinkage grout
| Item Model | LGM-3 | |
| Compressive strength (MPa) | 1d | ≥15 |
| 3d | ≥25 | |
| 28d | ≥40 | |
| Max | 50 | |
| Vertical expansion rate(%) | ≥0.02 | |
| Flow rate (mm) | ≥270 | |
| Bleeding rate (%) | 0 | |
| With or without rust action on reinforcement | Non | |
| Cohesive force of reinforcement (MPa) | Round steel | ≥5 |
| Deformed steel | ≥12 | |
| Water demand (%) | 12~14 | |
| Casting demand (Kg/m3) | 2200~2400 | |
Technical indicators
[ characteristics ]
1. Early strength, high strength
The compressive strength can reach above 50MPa in 1-3 days, and the
equipment can be put into use after one day of installation.
2. Since the flow
Only need to add water to mix the site can be carried out, without vibration,
mortar flow to ensure no leakage grouting.
3. Micro expansion bulge
The casting body shall be used for a long time without shrinkage to ensure
the close contact between the grouting material and the foundation.
4.For a long time resistance
2 million fatigue tests and 50 freeze-thaw cycle tests showed no significant
change in strength and no subsequent decrease in strength.
4. Oil anti-permeability
After soaking in the oil for 30 days, its strength increases by more than 10%
compared with that before immersion.
[usage]
1.Anchor anchor for mechanical equipment
2.Grouting of equipment foundation or steel structure column footplate
3.Building structural reinforcement and repair
4.Post tensioned prestressed concrete structure with tunnel grouting
5.Anti-seepage anti-crack waterproof concrete project
6.Reinforcement planting reinforcement grouting
7.Bridges, roads, tunnels
8.Substitute epoxy mortar
Company introduction
Shandong Luming new materials Co., Ltd. was founded in 2005, is a manufacturer of amorphous refractory castables, non shrinkage grouting materials and high temperature pre products.
The company has two full-automatic production lines, the introduction of a complete set of advanced testing equipment, the establishment of a sound testing process, to ensure that customers with high-quality products and services.
The company has passed ISO9001 international quality management system certification, ISO14001 environmental management system certification and intellectual property management system certification, and has passed the field inspection and obtained the certificate. The company has several independent national intellectual property rights and is recognized as a high-tech enterprise.
You can discuss your purchase requirements with our customer service center, whether you are choosing the current product from our catalog or seeking engineering assistance for your application.
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: When was the company established?
A: The company was established in 2005.
Q:What is the business scope of the company?
A: Company mainly engaged in the development, production and sales of advanced new amorphous refractory castables, high temperature resistant pre-products, high strength non-shrinkage grouting materials and other products.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. Or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q:How can I reach you?
Address: No. 7136, Airport Road, High-tech Zone, Jinan, Shandong, China
You Might Also Like
How Fiber Laser Cutting Machine Works
Shantui Mini Wheel Loader SL20wn with Best Price
Open-End Spinning Machine Made in China for Glove and Socks ......
Corten Garden Edging/Simple Garden Edging
Medical Headache High Potential Treatment Equipment
-86 Degree Lab Medical Ultra Low Super Fast Deep Freezer
Vet Treadmill (TM-260M)
Fine Polished Tapping Inner Threaded Mould Standard Parts
Rgp3 0.01mbar Oil Free Mechanical Scroll Vacuum Pump
Sexy Blue and Red Supergirl Halloween Party Dress Cosplay Co......
Women′ S Messenger Bag Canvas Souvenir Bag New Simple ......