Products

No Blockage Rubber Ball Pump

China No Blockage Rubber Ball Pump, Find details about China Rubber Ball Pump, No Blockage Pump from No Blockage Rubber Ball Pump

Model NO.
NCPF80-250
Position of Pump Shaft
Horizontal Pump
Pump Casing Combined
Horizontal Split Pumps
Mounting Height
Suction Centrifugal
Impeller
Open
Usage
Pump, Pumps, Condensate Pump, Ash Pumps, Circulating Pump
Trademark
Mainte
Origin
China
HS Code
8413709990
Model NO.
NCPF80-250
Position of Pump Shaft
Horizontal Pump
Pump Casing Combined
Horizontal Split Pumps
Mounting Height
Suction Centrifugal
Impeller
Open
Usage
Pump, Pumps, Condensate Pump, Ash Pumps, Circulating Pump
Trademark
Mainte
Origin
China
HS Code
8413709990
No Blockage Rubber Ball Pump
Applications
NCP Non-clogging centrifugal pump is a solids handling pump for all kind of containing abrasive, long fiber, Coarse particles, rubber ball, waste water.
The pumps are widely used for papermaking, brewery, food, sugar industry, Fishery industry, kitchen treatment, sewage treatment, biogas engineering, chemical industry, environmental protection engineering and other industries.

Properties
Discharge diameter   40~500  mm  
Flow           10~3800  m3/h    
Head           7~90 m           
Lubrication      Oil               
Rotating         Clockwise        

Construction and Feature
The NCP pump is of single-stage, centrifugal pump, It has the features of high efficiency, non-clogging and back pull-out design which can allow the rotor to be removed from the pump casing without disturbing the pipe or dismantling the casing. This not only simplifies maintenance but also allows fast inter change of the impeller and wear plate of suction side, thereby permitting the pump to be rapidly modified to suit different operating condition.
According to the diameter of discharge, the KWP pump can be divided form 40mm to 500mm.
The KWP pump normally is suitable for delivering the normal media(PH value is about 1~12). For the application of corrosive fluid and other special requirement, please quote this information when making order.

Impeller
NCP pumps are supplied with four kinds of impeller for suction.
K impeller--- Closed non-clogging impeller
 With Wide flow channel, For clear water, sewage, sewage mud and medium containing solid.
N impeller--- Closed multi-vane impeller.
For clear water, Pulp, sugar juice, oil wastewater and media containing solid suspension.
O impeller--- Open impeller.
Same application as N impeller but also including fluids containing gas.
F impeller­--- Free flow impeller.
For handle large and long solids.(such as long fiber, sticky particles, paper pulp , rubber balls and so on)and fluids containing air.

Shaft seals
There are three types of shaft seals for NCP pumps:
Packing seal
High temperature packing seal
Mechanical seal

Easy to service
It has the features of back pull-out design which can allowed the rotor to be removed form the pump casing without disturbing the pipe or dismantling the casing. To ensure that the pump could operate at a high efficient duty point, a front volute plate or an impeller ring installed on the pump casing, as result of which the service life of the pump casing and the impeller could be lengthened and the maintenance cost could be lowered as well.

Material
Pump partsPaper makingSea waterAcid mediumSewageClear water
Pump casingStainless steel 304Stainless steel 2205Stainless steel 316LCast iron Stainless steel 2Cr13
ImpellerStainless steel 304Stainless steel 2205Stainless steel 316LCarbon steelStainless steel 2Cr13
ShaftAlloy steel  40CrStainless steel 316LStainless steel 304Alloy steel 40CrAlloy steel   40Cr
Shaft sleeveStainless steel 304Stainless steel 2205Stainless steel 316LStainless steelStainless steel 2Cr13


No Blockage Rubber Ball Pump

No Blockage Rubber Ball Pump

Related products
No Blockage Rubber Ball Pump


No Blockage Rubber Ball Pump
Project Cases
 
No Blockage Rubber Ball Pump
No Blockage Rubber Ball Pump
No Blockage Rubber Ball Pump



No Blockage Rubber Ball Pump



---FAQ---                                    

Q: How to customize pumps and mechanical seals?
A: Customers could send us application data, such as:
  Liquid:          
  Capacity:         m3/hr,  Head:          m
  Voltage:          V,      Frequency:            Hz
  We will select suitable pump and seal type.

Q: How can I pay for my items? What is the payment you can provide?
A: Usually by T/T, 30% down payment once PI confirmed, the balance will be paid after inspection and before shipment. L/C at sight.

Q: How long is warranty?
A: 12 months.

Q: How long is production lead time?
A: Normally 15 working days. If client need urgently, we have a huge spare part stock, we could finish assembly and testing in 10 days.

Q: Can you send the pump to our country?
A: Of course, Please advise destination port or your address.

Q: What is the shipping terms you can provide?
A: Depends on customer's requirements, we can provide different transportation terms, such as EXW, FOB, CIF.
 

You Might Also Like