Products

Lightweight Partition Building Material Compound Wall Machine

China Lightweight Partition Building Material Compound Wall Machine, Find details about China Compound Wall Machine, Wall Making Machine from Lightweight Partition Building Material Compound Wall Machine

Model NO.
YR-C-20190904
Customized
Customized
Item
Lightweight Wall Panel Machine
Panel Length
2440mm-3300mm
Product Width
610mm
Equipment Capacity
30, 000sqm~500, 000sqm Per Year
Machine Features
High Equipment, Low Failure Rate
Panel Usage
Interior Wall /Floor /Exterior/Roof/Ceiling
Steel Plate
Cold-Roll Steel Sheets
Mixer Capacity
1.5/2.0/2.5/3
Injection Way
by Pump
Trademark
OYADE
Transport Package
Bulk Packing
Specification
5containers
Origin
China
HS Code
8474802000
Model NO.
YR-C-20190904
Customized
Customized
Item
Lightweight Wall Panel Machine
Panel Length
2440mm-3300mm
Product Width
610mm
Equipment Capacity
30, 000sqm~500, 000sqm Per Year
Machine Features
High Equipment, Low Failure Rate
Panel Usage
Interior Wall /Floor /Exterior/Roof/Ceiling
Steel Plate
Cold-Roll Steel Sheets
Mixer Capacity
1.5/2.0/2.5/3
Injection Way
by Pump
Trademark
OYADE
Transport Package
Bulk Packing
Specification
5containers
Origin
China
HS Code
8474802000
Project requirement                                                                                     
 
 
Production capacity and Automatic degree
Annual output 
30000sqm/year to 1million sqm/year 
Forming machine type 
Vertical type
Mould car Size
3.5*1.35*3M 
Panel size 
Length L:2400~3000mm
Width 610/600
Thickness: 50-220mm 
Automatic degree 
Full automatic or as client requirement 
Plant size 
Plant size
1000~1200sqm ( For the mixer platform: Height not less than 8m,
others parts can be shorter)
Stock yard
About 10,000sqm board stock/ per 1500 sqm
Size is for reference, engineer can design a layout according to customer existing land area
Workers 
Mould car ≥15units :about 15-18person 
mould car ≤15units :about 5- 10person 
Raw material 
Basic Material 
Cement 
Heavy Aggregate
Sand 
Lightweight Aggregate 
EPS particles ( Particle size 3-5mm after forming )
Ceramsite (large than 5mm ),Pumice stone(5-12mm)
Perlite ,Tire pellets,Construction rubbish,Rice husk
Chemical additives
Like forming agent , water reducer ,cellulose ether ect. 

Machinery                                                                                                

Lightweight Partition Building Material Compound Wall Machine
Type 1: Vertical Type Mould Car which is more suitable to Composite wall Panel 

Product type: solid wall panel and composite wall panel

Size :2400-3000mm *610*45-200mm

Feature: 1.large capacity than horizontal mold car
            2. Double function, can produce both solid wall   panel and
               composite wall  panel 
            3. Small land space .vertical type mold car can save land area
           4.About demolding: each time can de-mold one panel 
 

Lightweight Partition Building Material Compound Wall Machine

Type 2: Automatic vertical mold car 

Product type: solid wall panel and composite wall panel

Size :2400-3000mm *610*45-200mm

Feature: 1.large capacity than horizontal mold car
          2. Double function, can produce both solid wall panel and composite wall panel. 
          3. Small land space .vertical type mold car can save land area
           4.About demolding: each time can de-mold 20 pcs  panel

Lightweight Partition Building Material Compound Wall Machine

Type 3; Automatic Horizontal mold car 

Product type: solid wall panel /composite wall panel /hollow core wall panel /sandwich panel
Size :2400-3000mm *610*45-200mm

Feature: 1.small capacity than horizontal mold car
          2.Can produce 4 type different panel 
          3.Need a bigger land area than vertical type mould car.
          4.About demolding : Semi-automatic :1 pcs /per time , Full automatic :10pcs/per time  


Three different de-mold system                                                                

Type 1 :1pcs /time demould machine

1.1pcs/time   
2.need3-4person  
3.20-30minutes/car

Lightweight Partition Building Material Compound Wall Machine

Type 2:New type demould machine
1.2pcs/time
2.need 1-2person,
3. need 10-15minutes /car
Remark: Only suitable for Type 1 mould car without steel plate ,also recommand to big capacity
Lightweight Partition Building Material Compound Wall Machine

Type 3 automatic demould machine
1.20pcs /time
2.need3-4person,1 person control the PLC ,another two assist demoulding
3.8-10minutes/car
Lightweight Partition Building Material Compound Wall Machine
 

Market Analysis                                                                                     

Lower material cost, higher profit

Lightweight and energy-saving composite wall panel is made of industrial waste fly ash, slag, ceramics, portland cement and EPS foam particles as the main raw materials. The production process is simple, the cost is low, and the economic benefits are considerable.
 

Advanced technology

The industrialization and commercialization of residential construction in this century have been irreversible. According to the development of wall materials in developed countries, the product is in line with the development law, which overcomes the defects of other lightweight wall panel, has unique performance, and will be the leader in new wall materials.
 

Broad source of raw materials

Housing and human beings are the most inseparable. They are long-term durable consumer goods, and they are also the most expensive and largest human products. This requires that the source of raw materials for the production of wall panel must be rich and extensive. The wall panel uses industrial waste fly ash, slag, and EPS foam particles as the main raw materials, which are environmental friendly; at the same time, low-cost ordinary chemical raw materials are used as the main raw materials, and both raw materials are abundant and widely sourced.

 

Lightweight panel has obvious competitive advantages in the industry


The weight is more lighter
The thickness of wall more thinner
More easy to install, take a modular assembly, saving installation time 
Higher strength, more anti-aging
Higher energy efficiency
More waterproof
The fireproof performance meets the national A standard and it is non-combustible;
Non-toxic, harmless, non-polluting, non-radioactive, it is a green building material
 

Low Operating Risk

1)Long-term and stability advantages: Once a wall material is successfully developed and recognized by the government and society, its market competitive advantage is relatively stable and its operation has a long-term nature."

3)Product production mechanization, higher production capacity, less workers needed, high stability.

Lightweight Partition Building Material Compound Wall Machine
 
Panel type                                                                                       
 

Finished panel 

This kind of machine could produce 4 kinds of panel

EPS Concrete Wall Panel EPS Sandwich Panel Lightweight Concrete Wall Panel Making Machine


 
Project                                                                                           
We have been in this line for 15years.We have  the most projects in domestic and abroad market,
our main market is middle aisa, Southeast asia, South America.  
Lightweight Partition Building Material Compound Wall Machine
 
Application                                                                                         
Recommand Size 
1.Interior wall :90/100mm ,some place can be 75mm 
2.Exteriro wall :≥150mm ,180mm/200/220mm 
3.Roof :75mm 
4.Floor :120mm +each 60mm add a cross bean 
5.Fance wall :75mm 
 

Service                                                                                                       
 

Lightweight Partition Building Material Compound Wall Machine

Lightweight Partition Building Material Compound Wall Machine

 
 

You Might Also Like