Products

U. S. Type Drop Forged Wire Rope Clips/Bulldog Clip

China U. S. Type Drop Forged Wire Rope Clips/Bulldog Clip, Find details about China Clip, Bulldog from U. S. Type Drop Forged Wire Rope Clips/Bulldog Clip

Model NO.
WRCH
Origin
China
HS Code
7326909000
Model NO.
WRCH
Origin
China
HS Code
7326909000

H-Lift U.S. TYPE DROP FORGED WIRE ROPE CLIPS

Characteristics:

-Wire rope clips help secure wire rope ends.

-Wire Size Max: 1/8"~3-1/2"

-Material: Drop Forged Metal

-Surface treatment: Galvanized or hot dip galv
 
ITEMSIZEDimensionsWeight
ABCDEFGkg
WRCH031/8"0.470.810.440.220.410.940.720.027
WRCH053/16"0.590.940.560.250.501.160.970.045
WRCH061/4"0.751.190.500.310.661.441.030.09
WRCH085/16"0.881.310.750.380.721.691.380.13
WRCH103/8"1.001.630.750.440.911.941.500.21
WRCH117/16"1.191.811.000.501.032.281.880.32
WRCH131/2"1.191.911.000.501.132.281.880.35
WRCH149/16"1.312.061.250.561.222.502.250.435
WRCH165/8"1.312.061.250.561.342.502.380.46
WRCH193/4"1.502.251.440.621.412.842.750.68
WRCH227/8"1.752.441.620.751.593.163.120.96
WRCH261"1.882.631.810.751.783.473.501.13
WRCH301-1/8"2.002.812.000.751.913.593.881.24
WRCH321-1/4"2.313.132.130.882.194.134.251.95
WRCH361-3/8"2.383.132.310.882.314.194.632.07
WRCH381-1/2"2.593.412.380.882.444.444.942.43
WRCH421-5/8"2.753.632.621.002.664.755.313.18
WRCH451-3/4"3.063.812.751.132.945.285.754
WRCH502"3.384.443.001.253.035.886.445.6
WRCH582-1/4"3.884.503.191.253.196.387.137.2
WRCH642-1/2"4.134.563.441.253.696.637.698.6
WRCH692-3/4"4.385.003.561254.886.887.698.6
WRCH763"4.755.883.881.504.697.639.1914
WRCH893-1/2"5.506.194.501.506.008.3810.7518

U. S. Type Drop Forged Wire Rope Clips/Bulldog Clip

U. S. Type Drop Forged Wire Rope Clips/Bulldog Clip

Frequently Asked Questions

Q1. How often should lifting equipments be subject to thorough examantions?

Thorough examination of lifting equipment must take place every 12 months - or every 6 months if the equipment is used to lift people. Any accessories used in lifting should also be inspected every 6 months. These are the minimum requirements, where there is no formal 'examination scheme' drawn up by a competent person.

Q2. What is a competent person ?

A competent person is someone who has appropriate practical and theoretical knowledge and experience of the equipment for which they act as 'competent person'. This knowledge and experience can help them detect defects / weaknesses and assess whether they will affect the continued safe use of the equipment.

Q3. Does new lifting equipment have to be thoroughly examined before use ?

You must have lifting equipment examined in the following circumstances:

Before using it for the first time - unless the equipment has an EC Declaration of Conformity which is less than one year old and the lifting equipment was not assembled on site. If it was assembled on site, it must be examined by a competent person to confirm that the assembly was correct and safe.
After assembly, and before use at each location - for all lifting equipment that requires assembly or installation before use (eg tower crane) - to ensure it has been installed correctly and is safe for use
 

You Might Also Like