China Foundry Resin Sand Mixer/Resin Coated Sand Casting/Resin Sand Production Line Treatment Process, Find details about China Core Shooting Machine, Shoot Core Machine from Foundry Resin Sand Mixer/Resin Coated Sand Casting/Resin Sand Production Line Treatment Process
Product description
Introduction of resin coated sand processing production line
The production process of the thermal coated sand production line is briefly described as follows: the raw sand is lifted to a new sand hopper by a hoist, and then enters the heater for heating after being quantified; when the temperature reaches the required, it is discharged into the sand mixer, and resin is added manually. After the coating is completed, start to spray the curing agent urotropine aqueous solution. Then add the release agent calcium stearate, automatically blow, cool, and crush, and then unload it into the cooling screen. After coarse screening, cooling, and fine screening, it is lifted to the secondary cooling sand hopper and cooled again, and it can be directly bagged. Film sand. The thermal coated sand production line has the characteristics of good fluidity, good wear resistance, good fire resistance, and good heat resistance. Therefore, the castings produced also have the advantages of high strength, high temperature resistance, low expansion, and good processing effects.
Model | ZH600 | ZH750 | ZH850 |
Max Dimensions of mold board(mm) | 780*600 | 800*780 | 980*800 |
Max sand core weight(kg) | 15 | 20 | 20 |
Heating mode | Electric heating | Electric heating | Electric heating |
Assembly power(kw) | Set according to the mould's size | Set according to the mould's size | Set according to the mould's size |
Sand hopper volume(kg) | 200 | 200 | 300 |