heat Resistant Belts is used in Steel Plants (for handling Sinter and Coke) and Cement Plants (for handling Clinker) in addition to other areas of applications. As a rule, special heat resistant belts are required for transporting materials with a temperature of over 70°C. Materials of this type may consist of sinter, cement, moulding sand, coke etc
heat resistant conveyor belts are more than capable of meeting the demands of even the most extreme conditions, which in some cases can involve temperatures as high as 400°C. High temperatures of conveying material can do serious damage to the conveyor belt carcass itself damaged, the heat resistant conveyor belts can protect the belt well.

The service life of these belts depend not only on the temperature of the materials to be transported and on the construction of the belt but also on a number of other factors such as the wear properties of the materials, the fall during loading, the size of the material, the length of the belt, the speed of the conveyor and any chemical action which may be involved. Choosing the correct thickness of the cover is Also essential because the cover acts as a barrier between the heat source and the carcass.

Belt types

Belt width: 300mm-2400mm
Such as 600 mm, 650mm, 800mm, 900mm, 1000mm, 1200mm, 1400mm, 1500mm,
1600mm,2000mm, 2200mm, 2400mm;

Maximum thickness: 25 mm, such as 3+1.5mm, 3+2mm, 4+2mm, 5+3mm, 6+2mm, 8+2mm etc

Length: according to order (max. 4500 kg/roll);

Number of insertions: 2-6 ply, max. 6 insertions (or according to order);

Type of insertions: EP100- EP800, such as Ep 100, Ep 125, Ep 160, Ep 200, Ep 250, Ep 315

Fabric structure warp: polyester

Fabric structure weft: polyamid

Grade: X,Y,Z,W, MOR, N,M, RMAI, RMAII

tensile strength 8-25mpa

Feature:  High Strength, wear resistant, Durability

Standard: DIN 22102, RMA, AS 1332, SABS 1173/2000, IS 1891, BS 490, JIS K 6322, etc.

Edge:  molded edge and cut edge

Fabric: CC, EP, NN

Popular model:

NN100, NN150, NN200, NN250, NN300, NN400

l EP 250/2-3+1

l EP 300/3-4+2

l EP 400/3-4+2

l EP 500/4-5+2

l EP 630/4-6+2

l EP 800/4-6+2

Application of Heat Resistant Conveyor Belt: 
It is suitable for conveying hot material with high temperature such as in cement plant, steel plant.

the best designed covers for specific installations main material of heat resistant belt is EPDM.
we can produce from 300mm Width to 2500mm Width. 

We have these grade type on heat resistant belt.

Grade HR : Specially compounded rubber capable of withstanding recommended for handing thermal degradation for prolonged periods and recommended for handing material like alumina, ash, clicker, foundry sand, etc. at temperature above 65c, and upto 120c for fines and 140c for coarse material.
·HR(T1) - Our range of HR(T1) Conveyor Belts are heat resistant suitable for continuous Temperature up to 120 degree centigrade for coarse materials and 100 degree Centigrade for fines. These conveyor belts are mainly used in Paper, Foundries, Chemical & Fertilizer plants etc.
·SHR (T2) - Our range of SHR (T2) Conveyor Belts is used for handling material up to 160 degree centigrade for fines and 180 degree centigrade for coarse material. These Conveyor belts are mainly used for conveying Sintered ore, Pellet, Coke, and Clinker Etc.
·SHR(T3) - Our range of SHR(T3) Conveyor Belts are used for controlled high temperature Applications, it is suitable for continuous service up to 180 degree centigrade and a peak temperature of 200 degree centigrade. These conveyor belts are mainly used to handle red hot materials such as Cement, Clinker, Sintered Ore and Phosphate.

Special features:
1) Excellent heat resistant and abrasion resistant cover rubber compound.
2) Recommended to protect conveyor belt from surface cracking and hardening by heat.
3) Specially heat-treated and dipped fabric to minimize carcass shrinkage by heat ageing.
HR - T1 (suited upto 120 Deg C)
HR - T2 / SHR (suited upto 150 Deg C)
HR - T3 /UHR (suited uptp 200 Deg C)
Pyroshield 250 (suited upto 250 Deg C)
Pyroshield 300 (suited upto 300 Deg C)

Types & Physical Performance

 
Type And Applications 

techinical datasheet

   

Notes:  The belt meets the requirements of DIN 22102 standards.

Ambient temperature within  -20 °C and 200 °C .Temperature of the conveyed material may reach max. 300°C.

      




Packaging 
--- Maximum 500m per roll for rubber EP conveyor belts 
--- Cassette package is available for abrasion resistant conveyor belts 
--- One 20" container can load 6--8 rolls DIN-Y conveyor belts 
--- One 40" container can load 8--10 rolls stone crusher conveyor belts 
--- Inner is packed on round rubber core with 30cm diameter and 12cmx12cm square hole. 
--- Outer is packed with one ply water-proof PP fabric 
--- Customized package is available for rubber conveyor belting

Delivery
3-4 weeks after receiving your advance payment.





Our other popular products
SBR , NBR, CR, EPDM, Silicone, Viton, natural rubber sheet
Stud dot, checker, diamond, fine rib, wide rib rubber sheet floor, stable mat, hollow mat