Atos DPHI, DPHE, DPHER electro-hydraulic reversing control valve:

ATOS electro-hydraulic reversing valve DPHI type is a slide valve type, two- or three-position two-step electromagnetic direction. Suitable for hydraulic systems.

Controlled by the sturdy direct-acting solenoid valve, there are three different models:

DHI is suitable for AC and DC power supply. Electromagnet with cURus certification standard.
DHE is suitable for DC power supply and has high performance.
DHER is the same as DHE, but with the electromagnet of the CURUS certification standard.
The valve body produced by the assembly line is deburred and cleaned by a heat burning method. Optimize the oil path through the wide grooved return tank of the valve for a lower pressure drop.

A device for controlling the switching time can be provided for this type of valve. The coil can be easily replaced without tools.
The sturdy construction is suitable for field work.
Installation interface: ISO4401 standard

     Valve specifications: 1 = 10 path Maximum flow: 160I/min
                         2 = 16 diameter Maximum flow: 300I/min
                         3 = 25 path Maximum flow: 700I/min
                         4 = 32 path Maximum flow: 1000 I/min

     Pressures up to 350 bar.

 

Product Show:


Precautions:
ATOS directional control valve, when the intake air volume or displacement of a certain interface is very small, the pressure difference between the valve and the valve can not be reversed before and after the valve, so that the valve can not be completely reversed and stopped midway, causing the valve to malfunction. . Therefore, due to the attention during use, do not use the reducer at one interface to cause the passage to be too small. The actuator in the automatic control system directly reflects the adjustment quality of the system. According to the working principle, it can be divided into a direct acting valve and a pilot valve. The direct acting valve is a valve that directly realizes the commutation requirement by manpower or electromagnetic force; the pilot valve is composed of a pilot head and a valve body 2, and has a pilot head piston. The valve stem inside the main body of the valve is reversible. As a terminal component in process control, people are more aware of its importance than in the past. The application of the regulating valve is very important, in addition to the quality of the product itself, whether the user is correctly installed, used, and maintained, it is very important to calculate and select correctly. Due to errors in calculation and selection, the system is opened and stopped, and some even cannot be used. Therefore, users and system designers should recognize the importance of the valve at the site, and must pay enough attention to the selection of the regulating valve. The valve has a road pass process during the commutation process

Model(Part of the model) :

DPHI-1611/A/X24DC
DPHI-1713-24DC (+ with light plug)
DPHI-2631/2-N24DC
DPHI-2711/D
DPHI-2711-N24DC
DPHI-2713/D-N230AC
DPHI-2713/H-N24DC
DPHI-2713-N24DC
DPHI-27193/H/S/WP-X24DC
DPHI-3711
DPHI-3711/D
DPHI-3751-N24DC
DPHE-1615/1-X24DC

DPHE-1614/A-X24/60AC
DPHE-1610-X24DC
DPHE-1611-X24DC
DPHE-1612-X24DC
DPHE-1613-X24DC
DPHE-1614-X24DC
DPHE-1615-X24DC
DPHE-1616-X24DC
DPHE-1617-X24DC
DPHE-1618-X24DC
DPHE-16190-X24DC
DPHE-16109-X24DC
DPHE-16191-X24DC
DPHE-16119-X24DC
DPHE-16193-X24DC
DPHE-16139-X24DC