China 2kw DC to AC Pure Sine Wave Inverter, Find details about China Single Phase Inverter, Pure Sine Wave Inverter from 2kw DC to AC Pure Sine Wave Inverter
Model | T1K | T3K | T5K | T10K | T15K | T20K | T30K | T60K | T100K | |
Power | 1KW | 3KW | 5KW | 10KW | 15KW | 20KW | 30KW | 60KW | 100KW | |
Power Factor | 0.8 | |||||||||
Phase | 3 phase 4 wire and ground | |||||||||
Wave form | Pure sine wave | |||||||||
Frequency Range | 45 - 65Hz | |||||||||
Input | Voltage Range | 380V± 20%(3 phase), phase voltage 220V | ||||||||
Rectifier | 3 phase 6 pulses, 12 pulses is optional | |||||||||
Output | Crest Factor | 3: 01 | ||||||||
Rated voltage | 380/400/415V optional | |||||||||
Phase voltage | 200 - 244VAC, | |||||||||
Transient response | +/-5%, 10ms | |||||||||
Total-harmonic distortion | < 3% linear load, < 5%( nonlinear load) | |||||||||
Short circuit current | Short current for 0.1s (200% current) | |||||||||
Overload capacity | Overload 125% for 10 ms, 125%-150% for 1min. automatically resume when load become normal | |||||||||
Bypass | Type | Static state + manual maintenance bypass | ||||||||
Input Phase | 3 phase 4 wire and ground | |||||||||
Input voltage range | 15% - 25% (the front control panel selectable) | |||||||||
Transfer time | Inverter / bypass transfer switch time(Overload): 0ms inverter / bypass transfer switch time (fault inverter) 1ms | |||||||||
Remote signaling | Dry contact (battery low, battery discharging, bypass/ fault); output 12Vdc/80mA, Optional parts | |||||||||
Communication interface | RS232 | |||||||||
Operate condition | 0-40 degree Celsius, Less than 95%, without condensing | |||||||||
Noise at 1 M | less than 60 dB | |||||||||
Degree of protection | IP20 | |||||||||
Applicable Standards | EN50091-1-EMC EN50091-2liv. A | |||||||||
Product size(mm) | 560*230*570 | 590*470*730 | 900*600*1380 | 1200*900*1820 | ||||||
product weight(Kg) | 30 | 40 | 54 | 104 | 125 | 190 | 380 | 690 | 800 |