Sipotek O-Ring Vision Inspection Machine
China Sipotek O-Ring Vision Inspection Machine, Find details about China Vision Inspection Measureing Equipment, Industrial Machine Vision Suppliers from Sipotek O-Ring Vision Inspection Machine
Basic Info.
Model NO.
T300
Loading Method
Dynamic Load
Display
Digital
Control
Computer Control
Weight
100-500Kg
Power Source
AC220V
Trademark
Sipotek
Transport Package
Wooden Case
Specification
1800*800*900mm
Origin
China
Model NO.
T300
Loading Method
Dynamic Load
Display
Digital
Control
Computer Control
Weight
100-500Kg
Power Source
AC220V
Trademark
Sipotek
Transport Package
Wooden Case
Specification
1800*800*900mm
Origin
China
Product Desciption
Sipotek Customized Automated Optical Inspection Sorting Machine
1. Model type: T300
2. Machine characteristics: special vibration disc automatic feeding mechanism
3. Main functions: inspection of length, height, diameter, mixing, deformation, missing material, burr, black spot, scratch, etc.
4. Trial scope: suitable for testing rubber ring, screw, mobile phone accessories, stainless steel, aluminum, plastic and other devices
5. Detection accuracy: the highest accuracy can be up to 1mu
6. Detection efficiency: The highest detection speed can reach 1200 pieces per minute.
Communication Process You will know.
Step 1 Inquiry and communication
We will discuss as many details as possible to understand best of your inspection requirements. So we are available not only by phone or emails, but also on line chatting with Skype, Wechat, What's app and Alibaba. The contents of the communication will include inspection details, drawings, accuracy, speed, input and output, etc.
Step 2 Samples arrangement
Since our machine is customized designed according to customer's demand. Samples are necessary. Our engineers can make the solution depending largely on the lighting test of the samples. Thus we can check which is the defects, where can we find them under specific lighting source.
Step 3 Inspection solution Finished
After our engineer finished the sample testing procedure. They will give a result of the test and then will be reported to you. You can find what will be composed in the machine and how the result shows the sample images.
Step 4 Customer make decision
Now our customers will have the solution report, They will make a determination of the inspection project. PI will be sent and Order will be confirmed after their acceptance.
Step 5 Put into production
After orders are confirmed, we will discuss the producing technology and then start to make the customized machine. At the same time we will confirm the delivery date.
Step 6 Machine Delivery
Generally, our trade term is FOB Shenzhen. We strongly recommend our customers to verify the machine in our factory before shipment in case any problems or changes will be and we could solve them before shipped to destination. Meanwhile, customers can have a free training for the machine operation and installation.
Company Information
2. Machine characteristics: special vibration disc automatic feeding mechanism
3. Main functions: inspection of length, height, diameter, mixing, deformation, missing material, burr, black spot, scratch, etc.
4. Trial scope: suitable for testing rubber ring, screw, mobile phone accessories, stainless steel, aluminum, plastic and other devices
5. Detection accuracy: the highest accuracy can be up to 1mu
6. Detection efficiency: The highest detection speed can reach 1200 pieces per minute.
Sipotek designs and produces what is suitable for your products with effectiveness. | ||
1 | Machine Type | High speed Inspection Machine (Glass plate) |
2 | Industries Serve | For parts can lie stable such as screws, nuts, lathe parts, stamping parts, injecting model, cooling elements and fasteners. |
3 | Turntable | Dedicated round glass turntable |
4 | Optical System | Germany high magnification CCD industrial camera, Japanese lens, professional light source system |
5 | Camera Quantity | Standard with 3 ( 1-8 optional) |
6 | Operate System | Germany Siemens Industrial Computer |
7 | Video Inspection Software | Sipotek Machine Vision Inspection System |
8 | Feeding System | Dedicated feeding guide line, vibration feeder x 1 SET, automatic feeding and container devices (optional) |
9 | Package System | Automatic counter and package machine (optional) |
10 | Inspection Speed | 300-1200 pcs/min |
11 | Accuracy | Highest level up to±0.01mm |
12 | Inspection Details | Appearance inspection: outer side, inner side, opposite, Diagonal, length, height, concentric, roundness, step size of each part, angle, sharpness and etc |
Defective inspection: 360 degrees teeth, rotten tooth, bad tooth, oblique tooth, threading, inside burr, missing material,Internal hole blockage, cracking, glitch, solder joint area,Imprint, with or without internal teeth, inspect all functions of screw with flat head | ||
13 | Power and Voltage | Two phase 220v, 50Hz |
14 | Rated Power | 1KW |
15 | Air Pressure | Not lower than 0.35-0.7MPa |
16 | Weight | Around 500kg |
17 | Working Temperature | -3ºC~45ºC |
18 | Storage Temperature | -20ºC~60ºC |
19 | Machine Dimension | 1000mm (Length) X 1000mm (Width) X 1800mm (Height) |
Communication Process You will know.
Step 1 Inquiry and communication
We will discuss as many details as possible to understand best of your inspection requirements. So we are available not only by phone or emails, but also on line chatting with Skype, Wechat, What's app and Alibaba. The contents of the communication will include inspection details, drawings, accuracy, speed, input and output, etc.
Step 2 Samples arrangement
Since our machine is customized designed according to customer's demand. Samples are necessary. Our engineers can make the solution depending largely on the lighting test of the samples. Thus we can check which is the defects, where can we find them under specific lighting source.
Step 3 Inspection solution Finished
After our engineer finished the sample testing procedure. They will give a result of the test and then will be reported to you. You can find what will be composed in the machine and how the result shows the sample images.
Step 4 Customer make decision
Now our customers will have the solution report, They will make a determination of the inspection project. PI will be sent and Order will be confirmed after their acceptance.
Step 5 Put into production
After orders are confirmed, we will discuss the producing technology and then start to make the customized machine. At the same time we will confirm the delivery date.
Step 6 Machine Delivery
Generally, our trade term is FOB Shenzhen. We strongly recommend our customers to verify the machine in our factory before shipment in case any problems or changes will be and we could solve them before shipped to destination. Meanwhile, customers can have a free training for the machine operation and installation.
Company Information
Welcome to visit our company!
Sipotek is a professional machine vision inspection supplier and manufacturer. Welcome to visit our website and discuss with us online. If you want to make a schedule to visit our company, please let us know in advance so that we can make a good preparation for you. We welcome our customer to plan a visit to our company and watch the machine demo. If you are interested in automated inspection system or machine vision solution, please contact us for more information.
Before we can design a suitable inspection system for your products, we need to confirm as many details as possible. We will collect all the requirements which will be supportive for our R&D team to do the test and design a solution.
For Product Inquiries:
Contact Person: James Yuan
Company: Shenzhen Sipotek Technology Co., Ltd
Tel: +86-18617182707
Website:
https://sipotek.en.made-in-china.com
https://sipotek.en.made-in-china.com
You Might Also Like
Children′ S Bicycles 3-Year-Old Baby Bicycles 2-4-6-Ye......
Removable Plate Heat Exchanger with SS304 316L Plates
Automatic Parking Barrier Parking Position Lock
5 Axis CNC Precision Machining Vane Whee
Elite 24V 200ah Li-ion Phosphate Battery Green Energy LiFePO......
6015 Sculpture Art Wood Carving, Panel Automatic Cutting Mac......
13ft Folding Huge Outdoor Trampoline GS Certification
Wholesale Factory Made High Quality Hospital Bed Mattress To......
Four Color Polyester Film Flexographic Printing Machine
Zoomlion Bull Dozer O Ring 1081001402 for Zoomlion Bulldozer......
Diamond Drill