Products

Mf910s Butyl Thermoplastic Spacer for Ig

China Mf910s Butyl Thermoplastic Spacer for Ig, Find details about China Butyl Thermoplastic Spacer, Sealant for Facades from Mf910s Butyl Thermoplastic Spacer for Ig

Model NO.
MF910S
Bonding Material
Glass
Trademark
SILANDE
Transport Package
Steel Drum
Specification
220 kg/drum (<P 571.5mm)
Origin
China
HS Code
3506919010
Model NO.
MF910S
Bonding Material
Glass
Trademark
SILANDE
Transport Package
Steel Drum
Specification
220 kg/drum (<P 571.5mm)
Origin
China
HS Code
3506919010
Mf910s Butyl Thermoplastic Spacer for Ig
MF910S
Butyl Thermoplastic Spacer for IG
DESCRIPTION
SILANDE MF910S is the ultimate warm edge spacer for the manufacturing of insulating glass units, polyisobutylene(PIB) as the base, consisting of a thermoplastic elastomer formulated with the inclusion of desiccant for drying the airspace. Free of solvent, non fogging and without sulfuration. It can keep its plasticity and sealing properties in wide temperature range and will not become harden and crack. It also has excellent resistance to air aging and perfect adhesion property to glass and rigidity. Meanwhile, it will compose an excellent anti-humidity system with elastic sealant due to its low moisture vapor transmission property.
.APPLICATION FIELD
SILANDE MF910S is used for the manufacturing of warm edge insulating glass units with varying shapes and air space widths. The recommended secondary sealant for use is SILANDE Two component MF840 Polysulfide Sealant.

♦ BASIC USE

The application surfaces must be clean, dry and free of dust and grease. Con tact with any solvent, oil, or plasticizer containing glazing materials should be avoided. SILANDE MF910S can be applied by extruder special for thermoplastic spacer. Its concrete condition can be achieved by adjusting temperature and pressure. The preferred range of temperature is 100°C~140°C and operating environment temperature should be 18 °C or above. It is recommended that glazing material Compatibility & Adhesion Test          is necessary before use.
.TECHNICAL DATA - TYPICAL PROPERTIES
TEST ITEMSTEST RESULTSTEST STANDARD
Test ItemsTypical ValuesTest Standard
ColorBlack 
BaseSynthetic Rubber(P),100% solid. 
Specific Gravity1.25 g/m3GB/T 1033.1
Shear Strength (0.5mm)0.36 MPaQ/ZZY 033
Penetration (1/10mm, 25°C)25GB/T 4509
PropertiesLow moisture vapor transmission rate (MVTR), low gas permeability, low thermal conductivity. 
Moisture Vapour Transmission Rate(MVTR)0.17 [gr/m2. 24hrs. 2mm]EN1279-4
Gas Permeation Rate(Ar)1.80 x IO" [gr/m2. hrs]EN1279-4
Service Temperature-40°C to 80°C 
Application Temperature120°C to 140°C 


 

You Might Also Like