Domestic rice straw for feed making line camels feed pellet production line

  Domestic camels feed pellet production line, uses strong narrow belt transmission system, has ideal transmission efficiency, rotation steady, output high, noise low, no oil leak pollution, maintenance cost low, is a kind of feedstuff making machine which use corn, bean dregs, straw, grass etc directly pressed into pellets.

  Domestic camels feed making machine, are mainly used for animal bedding and animal feed, in addition, the pellet mill can also make pellets as fuels for stove, furnace and other heating equipments.

Features of Domestic camels feed pellet production line

1) Domestic rice straw for feed making line camels feed pellet production line.

2) The specifications of pellet can be adjusted by changing dies with different diameters and compression ratios.

3) The pellets have smooth surface, suitable density and higher curing degree.

4) This machine can make starch pasting, protein coagulating or denaturizing, and improve the nutritional quality of feed pellets, which is easy to digest and absorb, meanwhile kill the pathogenic germ and parasite.

5) The pellet machine has a compact structure, flexible movement and convenient operation, and four tires can be installed at the bottom of the particle machine.

6) Widely used, this pellet mill is not only used for feed and animal husbandry industry, but also used for fertilizer and biomass energy. it can be used for cattle, horses, sheep, livestock etc,chicken, pig, rabbit, duck, goose, fish, ostriches, camels, dove small plant breeding feed factory, and animal manure, sludge, biogas residue as organic fertilizer,inorganic fertilizer,compound fertilizer and other fertilizer granules.

7) Simple to operate and clean, only 1 or 2 workers are ok.

How to make your own pellets with our Domestic rice straw for feed making line camels feed pellet production line

The complete pellet making production line is composed the following steps.

Step1:Crushing

1) Before raw materials are made into biomass pellets of pellet machine, they are firstly reduced into smaller, uniform- sized particles. When the thickness is larger than 6 mm or size is greater than 50*50 mm, a pellet machine is needed to chip these materials into smaller pieces.

Step2:Drying

2) After all the raw material of pellet machine are crushed, dryer will be needed since for the most raw materials have the moisture content of about 50%.However, in general the optimal moisture content for pelletiztion is 10%-15%. Therefore, a rotary dryer is included in the pellet machine to reduce the moisture content.

Step3:Pelletizing

3) After crushing and drying all the raw materials properly, it is ready for the pellet machine. The pellet machine or press is the key piece of machine in the pellet plant. Pellet machine should be mentioned that impurities for the raw materials just like metal or stone, may damage the die and rollers of pellet machine.

Step4:Cooling

4) Usually after pelletizing, the temperature of pellet can reach almost 60-80 degrees, and also the moisture content is close to 15%. For storage purposes, a cooler must be used to reduce the surface temperature and moisture content.

Step5:Packing

5) Finally is the packing process of pellet making line. Inorder to protect the pellets from getting damaged and to increase storability, proper packing is necessary.