Two Component Epoxy Structural Adhesive Comens Weld SL2620t

China Two Component Epoxy Structural Adhesive Comens Weld SL2620t, Find details about China Weld Sealant, Expoxy Sealant from Two Component Epoxy Structural Adhesive Comens Weld SL2620t

Basic Info.

Model NO.

Comens Weld SL2620T

Characteristic

Fast Cure, High Shear Strength, Waterproofing

Promoter Composition

Filler

Composition

Organic Material

Color

Blue

Density

1.30±0.05 Kg/L

Tack-Free Time (23 ºC, 50% Rh)

20~60 Min

Rate of Cure (23 ºC, 50% Rh)

≥ 3 mm/24hrs

Shore a Hardness

60±5

Shear Strength

≥ 2 N/mm^2

Tensile Strength

≥ 5 N/mm^2

Elongation at Break

≥ 400%

Tear Strength

≥ 10 N/mm

Non-Sag Properties

Good

Shelf Life (Storage Below 25ºC)

Cartridge:9 Months Sausage:6 Months

Trademark

SL2620T

Transport Package

0.5kg/ Pail, 2kg/ Pail

Specification

ISO9001/TS16949

Origin

China

HS Code

3506100090

Model NO.

Comens Weld SL2620T

Characteristic

Fast Cure, High Shear Strength, Waterproofing

Promoter Composition

Filler

Composition

Organic Material

Color

Blue

Density

1.30±0.05 Kg/L

Tack-Free Time (23 ºC, 50% Rh)

20~60 Min

Rate of Cure (23 ºC, 50% Rh)

≥ 3 mm/24hrs

Shore a Hardness

60±5

Shear Strength

≥ 2 N/mm^2

Tensile Strength

≥ 5 N/mm^2

Elongation at Break

≥ 400%

Tear Strength

≥ 10 N/mm

Non-Sag Properties

Good

Shelf Life (Storage Below 25ºC)

Cartridge:9 Months Sausage:6 Months

Trademark

SL2620T

Transport Package

0.5kg/ Pail, 2kg/ Pail

Specification

ISO9001/TS16949

Origin

China

HS Code

3506100090

Product Desciption

Description

Comens Weld SL2620T is a two component epoxy structural adhesive. The product is a tough adhesive with high thixotropic properties. This product is mainly used for the opening of the composite material in the vehicle, the sealing of the metal rough surface, the filling and sealing, the smoothing repair, etc.; and the self-adhesive or mutual adhesion between the metal and the SMC substrate. This product has high bonding strength, high compressive strength, impact resistance, corrosion resistance and aging resistance.

♦Low shrinkage rate ♦ Low density ♦Pot life 60-80min
♦ 100% curing ♦ High thixotropy, suitable for filling gaps

Metal: aluminum, cold rolled steel, magnesium alloy, stainless steel
Composite material: FRP
Thermoplastic: PVC, acrylic, phenolic plastic, polycarbonate, fluoropolymer
Other materials: fabric, foam, glass, wood, rubber

Note: The following information and data are typical values under standard conditions, not as a basis for product acceptance. If the test environment is not explicitly mentioned in the following tests, the test environment is unified to a temperature of 24 ± 2 ° C and a humidity of 50 ± 5% RH.

Property	SL2620T PA	SL2620T PB	Mixed
Color	White	Light blue	Light blue
Density /g/cm3	0.60±0.05	0.60±0.05	0.60±0.05
Statue	paste	paste	paste
Viscosity /Pa.s	-	-	-
Pot life /min	-	-	60-80/24ºC
Curing time/d	2~3
Applicable temperature	-40ºC~120ºC
Mixing ratio	PA/PB=2:1(Volume ratio ) PA/PB=2:1(Mass ratio)

Note: Operating time: refers to the time when SL2620T no longer has bonding ability after mixing 60g of A/B two components.

Note: The following information and data are typical values under standard conditions, not as a basis for product acceptance. If the test environment is not explicitly mentioned in the following tests, the test environment is unified to a temperature of 24 ± 2 ° C and a humidity of 50 ± 5% RH.

	Value	Failure modes
Conditions Shear strength /24ºC
6061 aluminum /MPa	8.0	AF
304 stainless steel /MPa	10.0	AF
Ontology performance /24ºC
Dielectric strength /KV/mm	35	-
compressive strength /MPa	35	-
Hardness/shoreD	70	-

Note: Destructive form in the table AF = adhesive failure
          The test standard for shear strength: GB/T 7124
          The dielectric strength is tested by ASDM D149.
          The compressive strength is tested by ISO 527-2.
          The hardness test standard is: ISO868

Can withstand:Acid and base (PH3-10), hydrocarbons, brine
Can't withstand:Polar solvent, strong acid and alkali

Product specification: 0.5kg/ pail, 2kg/ pail.
The recommended storage temperature is 8~25°C and the storage period is 12 months.
Storage at 25°C helps to extend the shelf life of the product. Long-term exposure to room temperature and above will shorten the shelf life of the product.
Do not expose the product to high temperature storage. Recommended storage environment: ventilated, dry and dark.

When bonding, the surface to be bonded is wiped clean with a cleaning agent such as acetone or alcohol or gasoline to remove surface dust, oil and other stains. If the bonding surface can be roughened by grinding or the like, the bonding strength is better.