40W 5000K Inductive LED Panel Lamp for Ceiling with Dimmable

China 40W 5000K Inductive LED Panel Lamp for Ceiling with Dimmable, Find details about China LED Panel Lighting, LED Panel Lamp from 40W 5000K Inductive LED Panel Lamp for Ceiling with Dimmable

Model NO.
Panel lighting
Base Material
Aluminium Alloy
Certification
CE, RoHS
Voltage
100-240V
Beam Angle
120°
Trademark
Selsct as specified by the customer
Transport Package
Industrial Packaging, Transport According to Custo
Specification
600*600mm 300*1200mm
Origin
Shenzhen Guangdong, China
HS Code
9405409000
Model NO.
Panel lighting
Base Material
Aluminium Alloy
Certification
CE, RoHS
Voltage
100-240V
Beam Angle
120°
Trademark
Selsct as specified by the customer
Transport Package
Industrial Packaging, Transport According to Custo
Specification
600*600mm 300*1200mm
Origin
Shenzhen Guangdong, China
HS Code
9405409000
The principle of the induction lamp is to use infrared ray to sense the heat released by the human body. Most objects with temperature can be detected. The induction lamp will release a signal after detecting the heat, which will give instructions to the LED lamp. Body sensing lights are usually installed in entryways or corridors and can be set to night mode, that is, only for night lighting. Entering the room if a dark, unavoidable some of the confusion, may be in a hurry to bump. Suffering dot damage, at this moment the lamp of an induction is installed in door porch can solve this problem easily. This type of sensor lamp is also very suitable for the elderly and children to use, in case they can't reach or find the light switch and accident. Finally, the sensor lamp is actually a very energy saving lamp, it is not instantaneous on and off, it has the function of delay off, when people leave the area, it will delay off, so as to avoid the waste of resources caused by the instant switch, but also prolong the life of the lamp. Its induction Angle is generally 120 degrees, the induction distance can be up to 5 meters, the radiation is very wide, not only to ensure the safety of people's living, but also reflects the intelligent home.
40W 5000K Inductive LED Panel Lamp for Ceiling with Dimmable
1. Automatic recognition of ambient illumination to determine whether to work.
2. Using micro - microwave induction technology, someone into the light in the induction area to complete the automatic opening.
3. The induction distance, illumination value of light induction, delay time and waiting time can be set according to the actual needs of customers.
4. intelligent induction lamp adopts technology design. It has microwave induction and intelligent management functions, in the appearance of the product and bright state you can not feel its visual existence.
5. Intelligent induction light can automatically open the lighting, after people leave can automatically delay the shutdown, put an end to the artificial waste of energy, prolong the service life of electrical appliances and set energy saving, convenient security in one of the functions.
Can automatically open lighting, after the person left can automatically delay off, put an end to the waste of energy, prolong the service life of electrical appliances and set energy saving, convenient security in one function, induction head diameter 21mm, induction distance 0-5M induction Angle: 120° load: 40W (bulb working voltage: 220V working frequency: 50Hz delay range 0.5min-5min toilet, bathroom, elevator hall, etc

It is actually an automatic switch control circuit, there are a variety of types, switch closure (that is, turn on the light) the way of "voice control", "trigger", "induction", "light control" and so on, the way of disconnect is basically the same, by a delay circuit (work after a period of time automatically disconnect) control. If you are interested, you can see some of the following introduction: press ---- under the capacitor, very thin, a force will lead to changes in voltage and resistance, is the so-called pressure capacitance, by the amplifier circuit to amplify the voltage changes, connected to the timing circuit and relay. Touch ---- Conductive trigger, the button is metal, sending a weak current through you (the conductor) and the earth to form a path, so that the light. This product is suitable for the corridor, corridor, warehouse, garage, basement, toilet and other places of automatic lighting, ventilation and other purposes. Real reflection of building intelligence and modernization of property management.40W 5000K Inductive LED Panel Lamp for Ceiling with Dimmable40W 5000K Inductive LED Panel Lamp for Ceiling with Dimmable
40W 5000K Inductive LED Panel Lamp for Ceiling with Dimmable
Functional features

1. Automatic control products based on infrared technology. When someone enters the switch induction range, the special sensor detects the change of the infrared spectrum of the human body, and the switch automatically connects the load. The person does not leave and is active, the switch continues to be on; After the person leaves, the switch delay automatically turns off the load, the person arrives the light, the person leaves the light off, friendly and convenient, safe and energy saving.

2, With zero crossing detection function: contactless electronic switch, prolong the service life of the load.

3, the application of photosensitive control, switch automatic light metering, light intensity is not induction.

4. Power saving: The average annual electricity cost of a household is less than RMB 2.00 if calculated by two corridor lights per ladder

5. Security: the use of infrared sensor technology, no sound, no need to touch, the guarantee to the light without dark area, effectively improve the quality of modern residential areas and security.

6. Aesthetic: the design is elegant and pleasing to the eye, the installation is very convenient, and the grade of the community is improved.

7. The reliability of the induction: due to the use of silicon controlled rectifier circuit, high reliability, and the number of induction work is almost endless, is the best in the same products of the electronic circuit, electronic circuit board with the other sources are relay, use have specific provision, and directly affected by the relay quality, more easily out of the line fault.

Light source of long service life: because of using incandescent lamp, there is no mutual interference of electronic circuit, incandescent lamp obviously prolong service life, can reach more than 2 years, and other light sources, such as electronic energy-saving lamps, annular tubes, entangled factors are due to the repeated use of, very easy black, lead to scrap the tubes, the service life of the general only six months or so,

The use of high quality plastic lamp tray, not easy to deform/discolor/damage, transportation is very convenient.

8. The whole lamp has obvious price advantage among similar lamps, which is acceptable to both dealers and users and has a large market space.

Light source replacement cost is lower, brand 25W incandescent lamp market price 1.00 yuan,2 years change 1, annual average 0.50 yuan, and energy-saving lamp or ring lamp tube, market price 5.00 yuan or so,1 year need to change 2 times above, annual average 10.00 yuan The maintenance is very simple, because the structure of the lamps and lanterns is reasonable, such as the lamps and lanterns circuit board is damaged, without special tools, slightly electrician knowledge can be replaced by themselves (local dealers are accessories). Choose induction lamp can give priority to the induction lamp of infrared incandescent lamp light source as well!

Installation and debugging

1, because the switch on both sides of the induction range is larger than the upper and lower sides, so the installation of the switch, should make its positive axis and people walking channel direction as far as possible perpendicular, so as to achieve the best induction effect.

2, install the switch after the power, when the environmental light is sufficient, the bulb will flash three times, one minute after the end of the initialization, the switch into the monitoring state, with the object to cover the environmental light switch induction work, people do not leave and in the activity, the switch will continue to work; After the person leaves, the switch automatically delays and shuts off the load.

3, after the installation of the switch power, when the environmental light is insufficient, the switch directly into the monitoring state, people do not leave and in the activity, the switch will continue to work.

Matters needing attention

When installing, please install the intelligent lamps and lanterns in the place where people often move (on the ceiling or wall), which can improve the sensitivity and working range. Do not install on damp ceilings or walls. Disconnect the power supply before cleaning. When cleaning, please choose a non-corrosive cleaner. After installation of lamps and lanterns in a certain space can not use acid or alkaline chemical solvents, otherwise the electroplating or painting of lamps and lanterns caused damage.

1, installation do not live operation, such as the installation after the power.

2. Do not use over power range.

3. This switch is suitable for indoor environment, do not install it in outdoor bad environment for use.

Technical indicators

1, working voltage: AC180V-250V- (50/60Hz)

2. Load power: 5W-200W

3, load characteristics: innovative two-wire circuit design, suitable for all kinds of loads. (inductive load such as fluorescent lamp, energy saving lamp, etc. need additional compensator)

4. Static load: < 0.5W

5, induction range: 140 degrees cone Angle, 5-8 meters

6, delay time: about 60 seconds induction faucet is based on the principle of "cutting magnetic line of force" to do, and the person is a large conductor, when in the surrounding 50HZ grid formed by the magnetic field, will occur electromagnetic induction phenomenon, so the human body with induction electricity.

Installation method

Verify the voltage. Turn off the power before installation. The power cable is connected with 220VC, 50 (HZ), and fixed on the ceiling top or wall through the chassis with 4×25 large flat head tapping screws (should be fixed firmly and safely).



Wiring (the lamp body power line one of the wires with wiring particle and the fire line together, the other and the zero line together, after connecting the pull wire particle), do not drop shall prevail. Install a light bulb, glass, or back cover. Power can be tried. The first time this product is connected to the power supply, the light will be on for three consecutive times, indicating normal, but in the daytime or when the light is strong, the light will not be on normally, and at night when the light is low, the light will automatically turn on when people arrive. Such as in the daytime, with a black cloth cover infrared probe lens, after ten seconds (do not let its light) can also try its light work.

Suitable for editing speech

Which position is the LED body sensor lamp suitable for? According to its characteristic, the position that needs constant bright may not suit quite, but the following a few positions, it is to suit again to pass.

1. LED body sensing light shall be installed in the corridor

The traditional induction lamp installed in the corridor is more, generally composed of two parts, one is the human body induction panel switch, the other is the light source, most of the light source is incandescent lamp, the two separate, in the construction of the house will be the line and location cloth. The tungsten filament in an incandescent lamp cannot withstand frequent switching, so the broken lamp has to be replaced every year, and the cost of manual maintenance is too high. LED body sensing lamp built-in light source and body sensing device, only need to install it into the general E27 lamp holder, you can reach the body sensing lamp, people to light, people go off the light. Installation is placed in the corner of the stairwell, can feel the upstairs and downstairs of the people, coupled with the LED light source long life, low voltage work, frequent switch on it has no impact.

Two, the balcony installed LED body sensing lamp

Since all the time, most of the illuminating lamps and lanterns above the balcony is an incandescent lamp or the type that absorbs the top, the balcony belongs to half outdoor, open the lamp in the evening, mosquitoes and flying insects can turn around the lamp, also do not remember to close the lamp of the balcony from time to time in the life. In this position installed LED human body induction bulb or human body induction LED ceiling light, these two problems can be solved, LED is a cold light source, does not contain ultraviolet light, will not attract mosquitoes, intelligent induction human body, people in the balcony activities during the light is often on, people leave after the light off, energy saving and convenient.

Three, the property corridor installed LED body sensing light

A building there are dozens of homes, installed in each layer of the public corridor on LED is also very suitable for human body induction lamp, every time go home owner, walked out of the elevator and LED lights go on induction, in 1 minute of time delay, the owner is have enough time to open the door into the house of their own, rather than the position normally on the light bulb, it's much more to save power. But it is up to the real estate developer or the property owner to make the decision to install such lights in this location.

4. The utility room shall be equipped with LED body sensing lamp

Utility room is too messy place, the room is small, dark, can't see where is the switch inside, still have to put down his things out to turn off the lights, so trouble, he LED the human body induction lamp to solve and install it in the room on the top, when open the door into the automatic lamp is lit, in rummaging through the article when the light is normally on, directly go with what you're looking for, There's no need to be careful. No one turns off the light. After 60 seconds, you look back and it's already turned off automatically.

Five, the bathroom installed LED body sensing light

Is the installation of LED body sensor light in the bathroom not afraid of damp? Don't worry, the lamp body plastic shell, LED lamp beads as a light source is not afraid of moisture. When people are in the bathroom, the light is always on. When people walk away, they don't have to press the switch, so they don't have to be afraid of the danger of electric shock on their wet hands.

Principle:

It is actually an automatic switch control circuit, there are a variety of types, switch closure (that is, turn on the light) the way of "voice control", "trigger", "induction", "light control" and so on, the way of disconnect is basically the same, by a delay circuit (work after a period of time automatically disconnect) control.

Induction light switch is by human body temperature sensing. Ordinary people emit infrared light at a specific wavelength of about 10 microns, and special sensors can be used to detect the presence of infrared light.

When the human body infrared radiation to the sensor, due to the pyroelectric effect will release charges, the subsequent circuit after detection and processing can produce a control signal, so that the lamp lights up, after a certain time to leave the lamp automatically extinguish. In fact, a sensor switch is very similar to a sensor light, which has a sensor like this.

Extended Information:

Notes for installation of induction light switch

1

In the wiring process, the switch should be installed and wired in strict accordance with the instructions of the selected switch, so as to avoid short circuit or overload, resulting in product damage;

2

At the same time, remember to cut off the power supply before installing the induction light switch. If you have no experience, you should install it by a professional electrician to prevent electric shock.

3

The installation height of the induction lamp switch is generally 1.4m~1.6m;