6 Inch Working Fall Lifting 80m Hammer Water Pump
China 6 Inch Working Fall Lifting 80m Hammer Water Pump, Find details about China Hydraulic Pump, RAM Pump from 6 Inch Working Fall Lifting 80m Hammer Water Pump
Ram Pump
Name: GQJ fuel free pump
Specification: high lift: 150m dayang water: 100m3 / day or above
(non-standard: super high lift and super high lift can be customized according to requirements.)
Drive: flow drop is the power source - drive the work
Features: no oil, no electricity, no energy, no maintenance, 24 hours continuous operation.
Uses: water storage of drinking water, irrigation of farmland, irrigation of forest field, water supply of breeding, water conservancy engineering.
Features
Water hammer is a natural phenomenon. And the water pumps that created by water hammer have a history of
thousands years. These pump devices can use the hydrodynamic force in low level to deliver high head water. As a tool of lifting with no consumption of electricity, oil and other traditional energy sources, it is very appropriate for
the immigration and supply in mountain and semi-mountain areas with power shortage. And in areas with rich
water resources, it can be used for power generation through water lift.
Its lift efficiency is much higher and its property and status are more stable. Hydraulic Ram Pump can adjust
hostile environment and bad conditions, and it can works without supervision and energy consumption for days and years. As a result, it is really environmental friendly and low carbon operation, leading to practical and profound significance of environment and energy.
Advantages
Use of a renewable energy source, does not consume traditional fuel (petrol diesel and electricity), no pollution.
High efficiency and high lift, long life (more than 30 years service life).
Automatic, continuous operation requires no supervision.
Simplicity and reliability give a low maintenance requirement.
Applications
· The irrigation of Mountain, semi-mountain, hilly country.
· The irrigation of near reservoir, river, stream area.
· Drinking water for people and livestock at mountain area.
· Water supply for landscape and fountain.
· By use of the hydraulic ram pump to store energy for power generation.
· The greening of barren hills
System Diagram and Performance Data
Specifications example
1. 3 inch Ram pump KY-Z315T
(1)Specifications:
| No. | Model | KY-Z315T | |
| 1 | Drive Pipe size | 3 inch | |
| 2 | Lifting pipe size | 1.5 inch | |
| 3 | Minimum Working Fall | 0.23meters | |
| 4 | Maximum Working Fall | 12meters | |
| 5 | Optimal Working Fall | 1.5-4meters | |
| 6 | Quantity of water supplied from the source (Q) | 10-15m3/h | |
| 7 | Maximum Lift | 80meters | |
| 8 | Optimal Lift | 20-30meters | |
| 9 | Drive pipe length(The best) | 6~8 times as much as Working fall | |
| 10 | Angle between drive pipe and ground(The best) | About 7 ~ 10 degrees |
| 11 | Dimension(L×W×H) | 0.61×0.22×1.5meters | |
| 12 | Package Size(L×W×H) | 0.65×0.28×1.64meters | |
| 13 | Net Weight | 78KG | |
| 14 | Gross Weight | 113KG |
The example of installation method
Installation Method 1
If spillover dam has sufficient water Fall, the pump can be installed near the downstream directly, show as below:
Installation Method 2
If the water fall is small, the installation conditions are not satisfied, or the hydraulic ram pump must be install a fixed position, a water tank is made near the pump is necessary, water from the source flowing into the water tank through supply pipe (the water level of water tank is same as supply pipe), then water tank supply water to ram pump, show as below:
To obtain more Fall, it will be need to install two different pipes in water source and ram pump, one is supply pipe, the other is drive pipe, use a "T" fitting to join a stand pipe, In a way this brings water source much closer to the Ram pump, to provide sufficient fall and water level for drive pipe. Both supply pipe and drive pip need to run straight to achieve good water hammer effect, in order to assure enough water available, the supply pipe must be larger than drive pipe. The stand pipe can be PVC pipe or steel tube with top open, the diameter of stand pipe must be at least two sizes larger than supply pipe, the top of the stand pipe should be a few inches above the water level at the source to prevent overflow.
Notes:
Supply pipe and drive pipe should be in one straight line
Supply pipe more than drive pipe large diameter
Pump station solution
For other questions , pls contact with us !
You Might Also Like
FDA Approved Lemborexant Sleep-Wake Disorders and Insomnia D......
Dmr Digital Two-Way Radio, UHF/VHF, Compatible with Mototrbo......
Multifunctional Shr Opt/RF Hair Removel Elight Birth Mark Re......
Air Lift D2300 2300lbs Rubber Air Spring Bag for Car Truck A......
Hot Feed Rubber Extruder with Ce
Single Girder Gantry Crane with Factory Price
D2w6y Cheap Manual Home Used ABS Crank Hospital Foldaway Bed
Old Style Wooden Treasure Box with Brass Latch Woodcraft
Arena PARA Gatos for Toilet Bentonite Cat Sand Pet Supply
Women A Line Short Knee Length Tutu Tulle Prom Party Skirt
G Single Screw Progressive Cavity Pump Self-Priming Slurry P......
700ml Round Shape Spirits Vodka Whisky Brandy Glass Bottle