Products

Laboratory Vacuum Emulsifier Small Lab-Use Vacuum Emulsifying Mixer Homogenizer

China Laboratory Vacuum Emulsifier Small Lab-Use Vacuum Emulsifying Mixer Homogenizer, Find details about China Laboratory Homogeneous Emulsifier, Small Lab-Use Vacuum Emulsifying Mixer from Laboratory Vacuum Emulsifier Small Lab-Use Vacuum Emulsifying Mixer Homogenizer

Layout Type
Verticle
Operating type
Cycle Operating
Condition
New
Trademark
ERIC
Transport Package
Wooden Cases
Origin
China
Layout Type
Verticle
Operating type
Cycle Operating
Condition
New
Trademark
ERIC
Transport Package
Wooden Cases
Origin
China
JIANGSU ERIC ENERGY STORAGE EQUIPMENT CO.,LTD.
 
Laboratory Vacuum Emulsifier Small Lab-Use Vacuum Emulsifying Mixer Homogenizer
ERIC-10L SS Laboratory homogeneous emulsifier

I. equipment introduction
Laboratory Vacuum Emulsifier Small Lab-Use Vacuum Emulsifying Mixer Homogenizer

Laboratory Vacuum Emulsifier Small Lab-Use Vacuum Emulsifying Mixer Homogenizer
Laboratory Vacuum Emulsifier Small Lab-Use Vacuum Emulsifying Mixer Homogenizer

Vacuum emulsifier is mainly composed of emulsifier, vacuum system, lifting system, electrical control system, etc.
 
The equipment is mainly used in daily chemical care products, biomedicine, food industry, coating ink, nano materials, petrochemical industry, printing and dyeing auxiliaries, paper industry, pesticide and chemical fertilizer, plastic rubber, power electronics, other fine chemicals, etc., especially for material emulsification configuration with high matrix viscosity and solid content.
 
Laboratory Vacuum Emulsifier Small Lab-Use Vacuum Emulsifying Mixer Homogenizer





 
II. Equipment features
 
★ the company produces various types of vacuum emulsification, in which the homogenization system is divided into upper homogenization, lower homogenization, internal and external circulation, and the mixing system is divided into single-phase mixing, two-way mixing and spiral mixing; and it can customize various qualified and high-quality products according to customer requirements;
 
★ frequency converter is used for speed regulation of mixing, which can meet the production requirements of different processes;
 
★ homogeneous structure of German technology, with imported double face mechanical seal effect
 
★ vacuum defoaming makes the materials meet the aseptic requirements, and vacuum suction is used, especially for powder materials to avoid dust flying;
 
★ the lifting device can be selected for the main pot cover, which is convenient for cleaning and has more significant cleaning effect. The pot body can be selected for dumping;
 
★ the pot body is composed of three layers of stainless steel imported plate welding, and the tank body and pipeline are mirror polished, fully in line with GMP requirements;
 
★ according to the process requirements, the tank body can heat and cool the materials, and the heating methods mainly include steam and electric heating;
 
★ in order to ensure the requirements of the whole customer, the electrical appliances can be imported configuration, which can completely meet the international standards.


Main technique parameters

 The main pot
Serial numberProduct nameTo configure Remarks
1Mixing method1.A one-way paddle with a scraping wall,power 0.37KW,speed 0-180r/minFrequency control  ,Scraped wall material polytetrafluoroethylene or silica gel
2,Homogenizer power 0.55KW, Speed 10000-28000r/minGermany Milwaukee
2Sealing processmachine seal 
3Boil the wayElectric lifting 0.05KW 
4Feeding modeManual dumping ,Bottom manual discharge 
5Temperature displayResistance thermometer(≤140ºC) 
6Heating and cooling nodeElectric heating, water cooling 
7Pressure vacuum displayVacuum meter(gauge) max  -0.07Mpa 
8Main process parameters1.Working pressure of jacket 0.1Mpa 
2.Maximum working volume 12L 
3.Effective working volume 10L 
4Minimum working volume 5L 
9Material 1.contact material all is 316L,thickness 3mm 
2.jacket SUS304,thicnkess 3mm 
3.out shell pot material SUS304,thickness 3mm 
10Polishing More than 300m polishing result 
11Size 800mm×550mm 
12high1000mmHeight of the main pot cover
1350mmRaising height of main pot cover
13Voltage 220v/ 60hz 
14otherscontact material all is 316L 
15Weight 100kgs about 
 
    
Matching combination
Serial numberProduct nameTo configureRemarks
1BracketAll stainless steel support 
2Emulsification cookerMaterial filter,spice bucket,air filter etc 
3Material pipe316l stainless steel pipe is used in contact with material 
4Electric control system The main pot is integrated, and the manual button fully controls the main potUse the manual button
 
Power consumption
Serial numberProduct nameTo configureRemarks
110L Emulsification pot1. Frame blade mixing 0.37KW 
2.homogenizer 0.55KW,homogeneity
3Lifting power 0.05KW
2vacuum pump0.125KW 
                                              HOMOGENIZER MOTOR      TENGYUAN VACUUM PUMP      ELECTRIC MOTOR
Laboratory Vacuum Emulsifier Small Lab-Use Vacuum Emulsifying Mixer Homogenizer
Laboratory Vacuum Emulsifier Small Lab-Use Vacuum Emulsifying Mixer Homogenizer

    
FAQ
 
1. Is your company a manufacturer or trading company?
 
A1: We are a professional manufacturer, specializing in designing and manufacturing whole set of equipment for daily chemical, pharmaceutical and chemical industry, and we also supply heat exchanger, LNG vehicle cylinders, as well as related technical service.
 
2. Where is your company? How can I get there?
 
A2: We are in Gaoyou City, Jiangsu Province, China. It takes about 4 hours By car or bus from Shanghai Airport, and High speed train rail way station will be put in use at the end of 2020, which will be helpful to shorten the time to Shanghai.
 
3.What is your quality control procedure?
 
A3: We strictly follow ISO9001 QC procedure and we have got the TUV and ISO certificates. Moreover, before shipment, we carry out tests and inspections for each machine. Customers can also come for supervising.
 
4.What are your core business?
 
A4: We are a specializing in designing and manufacturing whole set of equipment for daily chemical, pharmaceutical and chemical industry, and we also supply heat exchanger, LNG vehicle cylinders, as well as related technical service.
 
5.How long is your lead time if I place order?
 
A5: Usually no longer than 30 days.
 
6.What is your payment term?
 
A6: 30% advance payment against PO, 70% balance after testing and before shipment. We accept LC at sight, TT, PayPal, etc.
 
7.What is your warranty? And how is your after-sales service?
 
A7: We offer one-year warranty. During this warranty, if there is any part with issue due to machine itself and isn't caused by improper operation, we will provide new spare part at our cost. Furthermore, we provide lifelong after-sales services for our machines and we supply spare parts with cost prices for future maintenance/repairs.
 


Laboratory Vacuum Emulsifier Small Lab-Use Vacuum Emulsifying Mixer Homogenizer
 

You Might Also Like